A/C, buckets cab 4 sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 02-08-2006, 05:53 PM

Hurry and rescue this cab before I cut it up!! It was a rare Cheyenne 30 with 350, TH400, a/c, tilt, roof marker lights, and buckets. It had a big camper on the back which explains the gaping hole in the back of the cab. Also, there is cancer in the visor area - probably due to the roof lights. The floor and rockers are in super condition - only surface rust in a few spots. One of the cab supports has some rust but the rest are great. Dash is uncut. It does still have the bucket seat supports under the floor. I had plans for it, but too many other projects and I need my garage space back! $250 in NW Ala.
Joshua

**JQ-72** · 02-08-2006, 05:54 PM

2 more

**71blksuper4x4** · 02-08-2006, 06:31 PM

If you decide to cut into it, what would you charge for the bucket seat mounts??? ttt for ya Trevor

**D.PASSMORE** · 02-08-2006, 07:41 PM

Same, I'll take the floor board if decide to cut it up. I need the bucket seat brace across the bottom of the cab. I'm assuming that I will be second inline. I can pick it up in a few weeks, I'll be passing through that part of the country.
Dave

**71blksuper4x4** · 02-08-2006, 08:16 PM

If you decide to cut into it, what would you charge for the bucket seat mounts??? ttt for ya Trevor

qksilver · 02-08-2006, 09:16 PM

Put me inline, if you are going to cut it up. I just don't have the time this year to do all the traveling I did last year. I would definity be interested in the bucket seat mounts.
Thanks,
Steve

roazo · 02-08-2006, 09:39 PM

Does it have the headlinler trim?

**JQ-72** · 02-09-2006, 05:53 PM

Probably around $100 for all the bucket seat mounts. That's probably the most valuable piece about this cab - I'd already junked it if it was a bench seat cab!! Let me wait a little longer before I part it out - it's for sale local also.
Joshua

**D.PASSMORE** · 02-09-2006, 06:52 PM

Josh,
Sounds good. If Trevor passes, I'll take for $100.00. If I miss his response or he passes, could you PM me and let me know? I've been looking for a while for the a good floor with the brackets. For me, you could just torch the floor section out that has the bottom and top brackets. I'll remove them from the floor pan. Standing by...

**71blksuper4x4** · 02-09-2006, 08:38 PM

Hey I will let D passmore take it if you don't have a serious buyer for the cab complete. I have found one locally. ttt for ya Trevor

**w314speed** · 02-09-2006, 08:40 PM

Hi Joshua,
I'm Interested In The Complete Cab! Sending You A Pm.

Thanks, Dan

cheyenne10 · 02-09-2006, 09:05 PM

Can someone detail the area and mounts for these bucket seat supports/brackets? maybe some of us are passing these by in wrecking yards and could be saving some good pieces.

teeitup · 02-10-2006, 12:04 AM

There is a pic of one on my thread about blazer parts.

cheyenne10 · 02-10-2006, 12:41 AM

Randy; 10 minutes of searching and no picture found. Couldn't really narrow it down, you have a lot of posts!!

454_72_4X4 · 02-10-2006, 01:22 AM

Are the cab mounts in good shape? One of 'em looks bad in the pic but I think it's just discolored?
Hows the cowl? (base of the windshield and where the fenders bolt on)
Windshield included?
How big of a job would it be to fix that big gaping hole? LOL
I might be interested depending on Uncle Sam...

teeitup · 02-10-2006, 09:34 AM

I brought my thread to the top of parts section, that has a pic of the bucket seat brackets on the cab. the one I have is sold, I'm just posting a pic of what it looks like.

02-08-2006, 05:53 PM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	A/C, buckets cab 4 sale Hurry and rescue this cab before I cut it up!! It was a rare Cheyenne 30 with 350, TH400, a/c, tilt, roof marker lights, and buckets. It had a big camper on the back which explains the gaping hole in the back of the cab. Also, there is cancer in the visor area - probably due to the roof lights. The floor and rockers are in super condition - only surface rust in a few spots. One of the cab supports has some rust but the rest are great. Dash is uncut. It does still have the bucket seat supports under the floor. I had plans for it, but too many other projects and I need my garage space back! $250 in NW Ala. Joshua Attached Images

02-08-2006, 05:54 PM	#2
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	Re: A/C, buckets cab 4 sale 2 more Attached Images

02-08-2006, 06:31 PM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: A/C, buckets cab 4 sale If you decide to cut into it, what would you charge for the bucket seat mounts??? ttt for ya Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-08-2006, 07:41 PM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: A/C, buckets cab 4 sale Same, I'll take the floor board if decide to cut it up. I need the bucket seat brace across the bottom of the cab. I'm assuming that I will be second inline. I can pick it up in a few weeks, I'll be passing through that part of the country. Dave __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

02-08-2006, 08:16 PM	#5
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: A/C, buckets cab 4 sale If you decide to cut into it, what would you charge for the bucket seat mounts??? ttt for ya Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-08-2006, 09:16 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: A/C, buckets cab 4 sale Put me inline, if you are going to cut it up. I just don't have the time this year to do all the traveling I did last year. I would definity be interested in the bucket seat mounts. Thanks, Steve

02-08-2006, 09:39 PM	#7
roazo Registered User Join Date: Nov 2004 Location: Easton, Mo Posts: 23	Re: A/C, buckets cab 4 sale Does it have the headlinler trim? __________________ 71 SSWB 4X4(Converting a 72 Blazer to a pickup with a shortened 90 Stepside bed.) 96 Ext Cab C2500 Long Bed 7.4 L 06 HHR http://67-72chevytrucks.com/vboard/i...chevy_anim.gif

02-09-2006, 05:53 PM	#8
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	Re: A/C, buckets cab 4 sale Probably around $100 for all the bucket seat mounts. That's probably the most valuable piece about this cab - I'd already junked it if it was a bench seat cab!! Let me wait a little longer before I part it out - it's for sale local also. Joshua

02-09-2006, 06:52 PM	#9
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: A/C, buckets cab 4 sale Josh, Sounds good. If Trevor passes, I'll take for $100.00. If I miss his response or he passes, could you PM me and let me know? I've been looking for a while for the a good floor with the brackets. For me, you could just torch the floor section out that has the bottom and top brackets. I'll remove them from the floor pan. Standing by...

02-09-2006, 08:38 PM	#10
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: A/C, buckets cab 4 sale Hey I will let D passmore take it if you don't have a serious buyer for the cab complete. I have found one locally. ttt for ya Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-09-2006, 08:40 PM	#11
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,317	Re: A/C, buckets cab 4 sale Hi Joshua, I'm Interested In The Complete Cab! Sending You A Pm. Thanks, Dan

02-09-2006, 09:05 PM	#12
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: A/C, buckets cab 4 sale Can someone detail the area and mounts for these bucket seat supports/brackets? maybe some of us are passing these by in wrecking yards and could be saving some good pieces. __________________ Bob

02-10-2006, 12:04 AM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A/C, buckets cab 4 sale There is a pic of one on my thread about blazer parts. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-10-2006, 12:41 AM	#14
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: A/C, buckets cab 4 sale Randy; 10 minutes of searching and no picture found. Couldn't really narrow it down, you have a lot of posts!! __________________ Bob

02-10-2006, 01:22 AM	#15
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: A/C, buckets cab 4 sale Are the cab mounts in good shape? One of 'em looks bad in the pic but I think it's just discolored? Hows the cowl? (base of the windshield and where the fenders bolt on) Windshield included? How big of a job would it be to fix that big gaping hole? LOL I might be interested depending on Uncle Sam... __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey



Register or Log In To remove these advertisements.

02-10-2006, 09:34 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: A/C, buckets cab 4 sale I brought my thread to the top of parts section, that has a pic of the bucket seat brackets on the cab. the one I have is sold, I'm just posting a pic of what it looks like. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.