** SOLD ** Chrome front bumper for sale or trade for rear rollpan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 02-20-2006, 12:28 PM

This 67-70 Chevy bumper has never been mounted on a truck. It has a few nicks on the front top left side as seen in the pics (approx. three quarter inch area). I'm selling this for $80 plus shipping. I would also consider a trade even up for a steel rear rollpan with tag holder for a fleetside that's in good shape with no rust. I'd prefer to trade with someone living in the US due to high shipping costs to Canada. Shipping is probably going to be around $30 or possibly more depending on your location. If you pay ahead of time I can hold it if you want to pick it up. I prefer Paypal but also take Postal Money Orders.

70c10 · 02-21-2006, 08:13 AM

ttt

69TowRig · 02-22-2006, 12:35 PM

That's beautiful, I want it! Figure up shipping to 27603. DHL is usually pretty cheap.

70c10 · 02-22-2006, 12:46 PM

69TowRig- I was just about to post SOLD on both of my bumpers. A member contacted me this morning and agreed to buy both. Thanks

TraderJon · 02-22-2006, 02:53 PM

Please take the time to read the rules before posting here-

XI. All For Sale posts shall have a price or prices, as well as your
location. No bids or auctions allowed here!!! If you don't know the
price of what you are selling, then you should do some research. If a Moderator or Administrator here asks you to post price(s) and you have not within a 12 hour time frame, they will delete your thread, period.

XIV. As of October 15th 2005 subscribing members will be the only ones permitted to post for sale and want to buy ads on any classified section of this site. All other rules of buying and selling still apply. 67-72chevytrucks.com, its administrators or staff are not responsible for any transactions on or off the forums. We will work hard to ensure you a smooth transaction, and help in the event you may need it, but all for sale and trade areas are buyer beware. Any persons who have misrepresented an item, lie about an item, fail to deliver, or are in violation of any of the rules will forfeit there subscription fees and be banned from 67-72chevytrucks.com

The Forum staff would like to encourage you to become a subscribing member. Your support will be greatly appreciated. Subscribe Here!

TraderJon · 02-22-2006, 04:37 PM

70c10

I forgot ,,i needed to pay my $25.
I have a steel roll pan off of my 67,,only on the truck maybe 3 months,,recessed license holder,in primer,,,will take $50 plus shipping ?

TraderJon

Joe67 · 02-22-2006, 04:44 PM

Quote:

Originally Posted by TraderJon

70c10

I forgot ,,i needed to pay my $25.
I have a steel roll pan off of my 67,,only on the truck maybe 3 months,,recessed license holder,in primer,,,will take $50 plus shipping ?

TraderJon

Thank you for supporting the board

Please do not hijack this thread, please feel free to start your own FOR SALE thread

TraderJon · 02-22-2006, 04:54 PM

10/4,,,,still learning to navigate this place.

70c10 · 02-22-2006, 05:16 PM

Trader Jon- I'm very interested. Please PM me with details.

Joe67 · 02-22-2006, 11:13 PM

Quote:

Originally Posted by TraderJon

10/4,,,,still learning to navigate this place.

NP - Thanks for understanding

69TowRig · 02-23-2006, 04:56 PM

Quote:

Originally Posted by 70c10

69TowRig- I was just about to post SOLD on both of my bumpers. A member contacted me this morning and agreed to buy both. Thanks

Well maybe my luck will be better next time.

Thanks.

02-20-2006, 12:28 PM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	SOLD Chrome front bumper for sale or trade for rear rollpan This 67-70 Chevy bumper has never been mounted on a truck. It has a few nicks on the front top left side as seen in the pics (approx. three quarter inch area). I'm selling this for $80 plus shipping. I would also consider a trade even up for a steel rear rollpan with tag holder for a fleetside that's in good shape with no rust. I'd prefer to trade with someone living in the US due to high shipping costs to Canada. Shipping is probably going to be around $30 or possibly more depending on your location. If you pay ahead of time I can hold it if you want to pick it up. I prefer Paypal but also take Postal Money Orders. Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 02-21-2006 at 03:21 PM.

02-21-2006, 08:13 AM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Chrome front bumper for sale or trade for rear rollpan ttt __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-22-2006, 12:35 PM	#3
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: Chrome front bumper for sale or trade for rear rollpan That's beautiful, I want it! Figure up shipping to 27603. DHL is usually pretty cheap. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

02-22-2006, 12:46 PM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Chrome front bumper for sale or trade for rear rollpan 69TowRig- I was just about to post SOLD on both of my bumpers. A member contacted me this morning and agreed to buy both. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-22-2006, 02:53 PM	#5
TraderJon Registered User Join Date: Dec 2005 Location: League City,Texas Posts: 66	Re: Chrome front bumper for sale or trade for rear rollpan Please take the time to read the rules before posting here- XI. All For Sale posts shall have a price or prices, as well as your location. No bids or auctions allowed here!!! If you don't know the price of what you are selling, then you should do some research. If a Moderator or Administrator here asks you to post price(s) and you have not within a 12 hour time frame, they will delete your thread, period. XIV. As of October 15th 2005 subscribing members will be the only ones permitted to post for sale and want to buy ads on any classified section of this site. All other rules of buying and selling still apply. 67-72chevytrucks.com, its administrators or staff are not responsible for any transactions on or off the forums. We will work hard to ensure you a smooth transaction, and help in the event you may need it, but all for sale and trade areas are buyer beware. Any persons who have misrepresented an item, lie about an item, fail to deliver, or are in violation of any of the rules will forfeit there subscription fees and be banned from 67-72chevytrucks.com The Forum staff would like to encourage you to become a subscribing member. Your support will be greatly appreciated. Subscribe Here! Last edited by Joe67; 02-22-2006 at 03:54 PM.

02-22-2006, 04:37 PM	#6
TraderJon Registered User Join Date: Dec 2005 Location: League City,Texas Posts: 66	Re: SOLD Chrome front bumper for sale or trade for rear rollpan 70c10 I forgot ,,i needed to pay my $25. I have a steel roll pan off of my 67,,only on the truck maybe 3 months,,recessed license holder,in primer,,,will take $50 plus shipping ? TraderJon

02-22-2006, 04:54 PM	#8
TraderJon Registered User Join Date: Dec 2005 Location: League City,Texas Posts: 66	Re: SOLD Chrome front bumper for sale or trade for rear rollpan 10/4,,,,still learning to navigate this place.

02-22-2006, 05:16 PM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: SOLD Chrome front bumper for sale or trade for rear rollpan Trader Jon- I'm very interested. Please PM me with details. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 02-22-2006 at 05:21 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.