parting out 1980 Suburban K-20 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dpmalibu · 02-21-2006, 09:45 PM

I am parting out this truck that I bought for the trans/T-case and shafts. The rest of the truck is up for grabs. Here is a list of what is good:

4) 1/4 panel glass w/ aftermarket tint $50

5) grill $40 / headlight bezels $35

6) front bumper $30

7) gas tank $30

8) class 3 hitch $40

17) T-400 trans $100

19) drive shafts $50 rear( no yoke)

20) Good A/C compressor $60

21) steering column (no tilt) $30

If interested give me a reaonable offer.Located in Trenton,NJ

rich-white · 02-21-2006, 09:59 PM

Where are you located?

rich-white · 02-21-2006, 10:00 PM

never mind ...saw at the bottom

chevy_fatman · 02-22-2006, 12:05 AM

Quote:

16) 4" suspension lift $150

Is that front and rear? brand? will it fit a '90 1/2 ton?

TexasJeff · 02-22-2006, 08:42 AM

Grille and headlight buckets. GMC or Chevy Suburban? Round or Square headlights?

dpmalibu · 02-22-2006, 10:35 AM

Chevy Suburban.It has round headlights. The lift is front springs and rear blocks and the shocks if you want them. I don't see why it wouldn't fit a 1/2 ton. 73-91 is all the same application. If you are not local it probably wouldn't pay shipping on this stuff because of the wait.It

Wild83C10 · 02-24-2006, 08:48 AM

Is the column from the '80 K-20 the same as the C-10? You said it was a non-tilt, auto correct?

dpmalibu · 02-24-2006, 03:50 PM

It should be the same. It is from an auto.

tedbick · 02-24-2006, 06:32 PM

any one willing to bring up the rolling chassis to the poconos?

dpmalibu · 02-24-2006, 06:51 PM

My uncle has a house in Long Pond but i don't have a trailer to tow it up there.

dpmalibu · 02-24-2006, 06:53 PM

for what it would cost you to have someone tow it up there it might be more worth it to rent a truck and trailer from Uhaul and do it yourself.

tedbick · 02-24-2006, 07:20 PM

yeah i have to go to nj to bring some furniture here next month maybe it will still be available then,plus ill have some income tax money to invest in my truck.

dpmalibu · 02-24-2006, 08:10 PM

let me know when it gets a little closer and I'll let you know if it is still around.

Burnsman · 02-24-2006, 10:39 PM

How much to ship headers to 16335?

dpmalibu · 02-24-2006, 11:43 PM

Shipping would probably somewhere around $15-18. How much of a hurry are you? I need them to demonstrate that the motor runs. Hopefully I won't have the motor too long.Let me know.Thanks

Burnsman · 02-25-2006, 09:01 AM

No hurry for the headers. Just let me know when you're ready. Brian

dpmalibu · 02-25-2006, 11:09 AM

okay Thanks

**Phuloi68** · 02-27-2006, 02:35 PM

Drivers side sunvisor? Does it have the decal on the top side for the part time 205 transfer case? What condition and how much to 46383 zip?

dpmalibu · 02-27-2006, 05:15 PM

Sun visor in good shape but no decal on top.

**Phuloi68** · 02-27-2006, 05:26 PM

Thanks...

82chevyc-10 · 02-28-2006, 02:42 AM

Did those wheels and tires work on there with that lift? Can you check on shipping for them to zip code 76308 and check on the shipping for the lift too?

dpmalibu · 02-28-2006, 05:43 PM

I have a couple of people interested in the whole thing so I will have to get back to you tomoorw when I know what is going on.

dpmalibu · 03-06-2006, 08:54 PM

Rears are sold.Everything else still available.

dpmalibu · 03-19-2006, 04:44 PM

ttt

rich-white · 03-19-2006, 08:55 PM

you don't happen to have inner fenders that are decent do you? Do you have a lift kit for sale and I missed?

02-21-2006, 09:45 PM	#1
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	parting out 1980 Suburban K-20 4x4 I am parting out this truck that I bought for the trans/T-case and shafts. The rest of the truck is up for grabs. Here is a list of what is good: 4) 1/4 panel glass w/ aftermarket tint $50 5) grill $40 / headlight bezels $35 6) front bumper $30 7) gas tank $30 8) class 3 hitch $40 17) T-400 trans $100 19) drive shafts $50 rear( no yoke) 20) Good A/C compressor $60 21) steering column (no tilt) $30 If interested give me a reaonable offer.Located in Trenton,NJ Last edited by dpmalibu; 03-26-2006 at 09:36 PM.

02-21-2006, 09:59 PM	#2
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Re: parting out 1980 Suburban K-20 4x4 Where are you located?

02-21-2006, 10:00 PM	#3
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Re: parting out 1980 Suburban K-20 4x4 never mind ...saw at the bottom

02-22-2006, 08:42 AM	#5
TexasJeff Don't Crush em Restore em Join Date: Aug 2004 Location: Pinehurst, Texas Posts: 764	Re: parting out 1980 Suburban K-20 4x4 Grille and headlight buckets. GMC or Chevy Suburban? Round or Square headlights? __________________ TexasJeff 2009 Silver with Linen Interior Cadillac DTS 1990 Red with White Top and Interior Ford Mustang GT convertible 1998 Red with Gray Interior, C3500 Chevy Crew Cab Dually

02-22-2006, 10:35 AM	#6
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 Chevy Suburban.It has round headlights. The lift is front springs and rear blocks and the shocks if you want them. I don't see why it wouldn't fit a 1/2 ton. 73-91 is all the same application. If you are not local it probably wouldn't pay shipping on this stuff because of the wait.It Last edited by dpmalibu; 02-22-2006 at 10:36 AM.

02-24-2006, 08:48 AM	#7
Wild83C10 Registered User Join Date: May 2002 Location: NJ Posts: 910	Re: parting out 1980 Suburban K-20 4x4 Is the column from the '80 K-20 the same as the C-10? You said it was a non-tilt, auto correct? __________________ 83 C10 Stepside (SOLD, it was a blast!) 383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt S475 and C4 DM running, fine tuning turbo= Douchebag Racing: Runs Fine all the Time

02-24-2006, 03:50 PM	#8
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 It should be the same. It is from an auto.

02-24-2006, 06:32 PM	#9
tedbick Registered User Join Date: Feb 2006 Location: long pond,pa Posts: 51	Re: parting out 1980 Suburban K-20 4x4 any one willing to bring up the rolling chassis to the poconos?

02-24-2006, 06:51 PM	#10
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 My uncle has a house in Long Pond but i don't have a trailer to tow it up there.

02-24-2006, 06:53 PM	#11
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 for what it would cost you to have someone tow it up there it might be more worth it to rent a truck and trailer from Uhaul and do it yourself.

02-24-2006, 07:20 PM	#12
tedbick Registered User Join Date: Feb 2006 Location: long pond,pa Posts: 51	Re: parting out 1980 Suburban K-20 4x4 yeah i have to go to nj to bring some furniture here next month maybe it will still be available then,plus ill have some income tax money to invest in my truck.

02-24-2006, 08:10 PM	#13
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 let me know when it gets a little closer and I'll let you know if it is still around.

02-24-2006, 10:39 PM	#14
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: parting out 1980 Suburban K-20 4x4 How much to ship headers to 16335? __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

02-24-2006, 11:43 PM	#15
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 Shipping would probably somewhere around $15-18. How much of a hurry are you? I need them to demonstrate that the motor runs. Hopefully I won't have the motor too long.Let me know.Thanks Last edited by dpmalibu; 02-24-2006 at 11:44 PM.

02-25-2006, 09:01 AM	#16
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: parting out 1980 Suburban K-20 4x4 No hurry for the headers. Just let me know when you're ready. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

02-25-2006, 11:09 AM	#17
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 okay Thanks

02-27-2006, 02:35 PM	#18
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	Re: parting out 1980 Suburban K-20 4x4 Drivers side sunvisor? Does it have the decal on the top side for the part time 205 transfer case? What condition and how much to 46383 zip? __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know.

02-27-2006, 05:15 PM	#19
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 Sun visor in good shape but no decal on top.

02-27-2006, 05:26 PM	#20
Phuloi68 Senior Member Join Date: Dec 2003 Location: Valparaiso, In Posts: 1,114	Re: parting out 1980 Suburban K-20 4x4 Thanks... __________________ Phuloi68 Indy survivor Norwood survivor Big Sandy survivor for those who fight for it... F R E E D O M has a price the protected will never know.

02-28-2006, 02:42 AM	#21
82chevyc-10 82 chevy c-10 Join Date: Oct 2004 Location: North Texas Posts: 56	Re: parting out 1980 Suburban K-20 4x4 Did those wheels and tires work on there with that lift? Can you check on shipping for them to zip code 76308 and check on the shipping for the lift too? __________________ http://img86.exs.cx/img86/986/fordwarning.gif Yes I know, but hell, I'm a foxbody mustang fan.

02-28-2006, 05:43 PM	#22
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 I have a couple of people interested in the whole thing so I will have to get back to you tomoorw when I know what is going on.

03-06-2006, 08:54 PM	#23
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 Rears are sold.Everything else still available. Last edited by dpmalibu; 03-06-2006 at 09:23 PM.

03-19-2006, 04:44 PM	#24
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: parting out 1980 Suburban K-20 4x4 ttt

03-19-2006, 08:55 PM	#25
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Re: parting out 1980 Suburban K-20 4x4 you don't happen to have inner fenders that are decent do you? Do you have a lift kit for sale and I missed?

Register or Log In To remove these advertisements.