Please Identify this Transfer Case - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DLRichards85 · 02-22-2006, 07:21 PM

I need some help guys. I need to know what kind of Transfer case this is. I thought it was a NP205 but the selector shafts that come out of it are vertical and all the NP205 pics I can find they are space further apart and are horizontal. If it is an NP205 what year is it? I need a rebuild kit and this is really kicking my but.

Thanks
Dustin

1969 GMC · 02-22-2006, 07:33 PM

I know what it isn't- an International- only NP202. At first I thought it was because of the huge pto opening, but the case is shaped differently. However, the NP202's shift rails arent stacked on top of each other like that. (I have one in the garage)

It's either a NP200 out of a Jeep M715 or Dodge M37,
or an NP201 from an International or Dodge.

Actually, I'm pretty sure its a NP201. I *think* the 200's have a centered rear driveshaft.

DLRichards85 · 02-22-2006, 08:42 PM

there is virtuay no information on the NP201 that I can find. Can someone please verify that it is a NP201 and if it is where I can get some info and parts. Also the transfer case is divorced can i bolt a 205 to the same x-member or am I going to have to break out cutting/welding tools?

1969 GMC · 02-22-2006, 09:49 PM

Go to this forum and ask for help:

http://www.binderbulletin.org/forums/index.php?

it's for International trucks, and I'm guessing yours may be from one. They will help out, perhaps even scan you an exploded diagram.

You could even try in the general 4x4 section of pirate 4x4. alot of guys over there who know their stuff.

rwgregory · 02-23-2006, 04:59 AM

If I had to guess, I'd say it came out of a late 60's Dodge. It looks very
similar to one I had in a '69 Dodge Powerwagon.

1969K10 · 02-24-2006, 01:39 PM

Looks a lot like my Rockwell T-221...

toroflow · 02-24-2006, 05:12 PM

Its definitely not a t-221. Looks to me like a NP 200 or 201.

stan79chevy · 02-24-2006, 07:56 PM

its a 201. the shift rails are top to bottom...on a 200 they are side by side...like on a 205. probably form an ih or dodge..last year they made em was 69 or 70

stan

DLRichards85 · 02-25-2006, 07:02 PM

I went to a IH forum and got a blown up skim of a NP202 they look identical. I hope it is because I have been playing the "ID the transfer case" game for a few weeks.

1969 GMC · 02-26-2006, 12:51 PM

It looks fairly similar to the divorced NP202 I have in the garage.

hope this helps

02-22-2006, 07:21 PM	#1
DLRichards85 Registered User Join Date: Jul 2005 Location: California City, Ca Posts: 23	Please Identify this Transfer Case I need some help guys. I need to know what kind of Transfer case this is. I thought it was a NP205 but the selector shafts that come out of it are vertical and all the NP205 pics I can find they are space further apart and are horizontal. If it is an NP205 what year is it? I need a rebuild kit and this is really kicking my but. Thanks Dustin

02-22-2006, 07:33 PM	#2
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	Re: Please Identify this Transfer Case I know what it isn't- an International- only NP202. At first I thought it was because of the huge pto opening, but the case is shaped differently. However, the NP202's shift rails arent stacked on top of each other like that. (I have one in the garage) It's either a NP200 out of a Jeep M715 or Dodge M37, or an NP201 from an International or Dodge. Actually, I'm pretty sure its a NP201. I think the 200's have a centered rear driveshaft. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

02-22-2006, 08:42 PM	#3
DLRichards85 Registered User Join Date: Jul 2005 Location: California City, Ca Posts: 23	Re: Please Identify this Transfer Case there is virtuay no information on the NP201 that I can find. Can someone please verify that it is a NP201 and if it is where I can get some info and parts. Also the transfer case is divorced can i bolt a 205 to the same x-member or am I going to have to break out cutting/welding tools?

02-22-2006, 09:49 PM	#4
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	Re: Please Identify this Transfer Case Go to this forum and ask for help: http://www.binderbulletin.org/forums/index.php? it's for International trucks, and I'm guessing yours may be from one. They will help out, perhaps even scan you an exploded diagram. You could even try in the general 4x4 section of pirate 4x4. alot of guys over there who know their stuff. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

02-23-2006, 04:59 AM	#5
rwgregory Registered User Join Date: Apr 2005 Location: Chula Vista, California Posts: 495	Re: Please Identify this Transfer Case If I had to guess, I'd say it came out of a late 60's Dodge. It looks very similar to one I had in a '69 Dodge Powerwagon. __________________ rwgregory 67 GMC 2500 ,2w/d wide box 305 V-6, 4-speed

02-24-2006, 01:39 PM	#6
1969K10 Senior Member Join Date: Jul 2004 Location: Clarks Hill, Indiana Posts: 733	Re: Please Identify this Transfer Case Looks a lot like my Rockwell T-221...

02-24-2006, 05:12 PM	#7
toroflow Registered User Join Date: May 2005 Location: Anaheim, CA Posts: 103	Re: Please Identify this Transfer Case Its definitely not a t-221. Looks to me like a NP 200 or 201. __________________ Ken '60 GMC 3/4T 4x4 '60 GMC Suburban 4x4 '64 GMC Suburban 4x4

02-24-2006, 07:56 PM	#8
stan79chevy Registered User Join Date: Sep 2003 Location: COVINGTON GEORGIA Posts: 477	Re: Please Identify this Transfer Case its a 201. the shift rails are top to bottom...on a 200 they are side by side...like on a 205. probably form an ih or dodge..last year they made em was 69 or 70 stan __________________ 79 chevy k20 350/350/205/D44/14bFF 4.56 gears rock LWB pimer black 01 S-10 ZR2 extended cab 4.3/4L60E/233 3.73 gear 31" DICK CEPEK CRUSHERS

02-25-2006, 07:02 PM	#9
DLRichards85 Registered User Join Date: Jul 2005 Location: California City, Ca Posts: 23	Re: Please Identify this Transfer Case I went to a IH forum and got a blown up skim of a NP202 they look identical. I hope it is because I have been playing the "ID the transfer case" game for a few weeks.

02-26-2006, 12:51 PM	#10
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	Re: Please Identify this Transfer Case It looks fairly similar to the divorced NP202 I have in the garage. hope this helps __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.