1972 k20 frame and axles f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

meathead95 · 02-24-2006, 05:55 PM

sorry no pics it is at my fathers house in illinois. $400

luisduran · 02-24-2006, 11:41 PM

Im interested, where in Illinois, 708- 906 16 38 Tanks

sakohntr · 02-25-2006, 02:35 PM

Are the front hubcaps there by chance???

meathead95 · 02-25-2006, 06:13 PM

i dont believe so i bought it and had it delivered to my fathers house with plans to pick it up and swap a 2wd body i had onto it for a daily driver but ive decided to just drive my 49k mile 86 silverado and sell this frame

Down south truckin · 03-01-2006, 11:34 PM

is this frame still available?if so let me know i may be interested thanks Mike

shelby987 · 03-02-2006, 09:42 AM

if you are parting it out, I would be interested in the front axle....what is the gear ratio?

meathead95 · 03-03-2006, 06:04 PM

it is still available. I am not sure on the gear ratio. i will not be parting it out though.
Thanks,
Keith

Big D · 03-03-2006, 06:50 PM

Wheres this located in Illinois? If if reasonably close , Im interested.

Thanks...... Dennis

Down south truckin · 03-03-2006, 08:50 PM

hey Keith is there any way you can get that frame into tennessee so we could meet somewhere in between,i'm about 25 n/e of Atlanta if so let me know Mike

Brewski* · 03-04-2006, 09:55 AM

Interested but need gear ratio.

MIDSTATE__67-72 · 03-04-2006, 11:26 AM

they're 4:10 gears

meathead95 · 03-04-2006, 04:51 PM

it is in assumption illinois. 20 miles south of decatur.
thanks
keith

meathead95 · 03-06-2006, 09:04 AM

ttt

meathead95 · 03-21-2006, 09:11 AM

one last time before ebay $350

Brewski* · 03-21-2006, 11:09 PM

I will check the map to see how far that is. Is it a dana 60 44 combo?

Down south truckin · 03-21-2006, 11:23 PM

is this a rolling frame?i asked before but no answer could you bring it part of the way down i would be glad to pay for the gas.does it have a power steering box and dics brakes? what about a transmission crossmember? does it have any damage or rust issues?thanks in advance Mike

meathead95 · 03-22-2006, 09:08 AM

not sure on the rearend but the front is a 44

sorry i missed you down south you should have sent me a pm. ill go get it and bring it here to unionville tn but it will be 550 then and i must be prepaid i dont believe it has a ps box it does have the crossmembers i dont remember any rust issues with it but again i have only seen it once i bought it and had it delivered to my dads house in illinois it does have 2 angle iron plow brackets on the front that will need ground off

Brewski* · 03-22-2006, 12:13 PM

The rear end is a 44? That can not be right? can it ?

meathead95 · 03-22-2006, 06:02 PM

sorry brewski i just got off of a 12hr night shift and had my head in my a$$ when i said that

meathead95 · 03-25-2006, 10:48 AM

sold thanks

02-24-2006, 05:55 PM	#1
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	1972 k20 frame and axles f/s sorry no pics it is at my fathers house in illinois. $400 __________________ 72 2wd blazer 72 swb 4x4

02-24-2006, 11:41 PM	#2
luisduran Registered User Join Date: Mar 2005 Location: Tinley Park Il. Posts: 144	Re: 1972 k20 frame and axles f/s Im interested, where in Illinois, 708- 906 16 38 Tanks

02-25-2006, 02:35 PM	#3
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: 1972 k20 frame and axles f/s Are the front hubcaps there by chance??? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

02-25-2006, 06:13 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 k20 frame and axles f/s i dont believe so i bought it and had it delivered to my fathers house with plans to pick it up and swap a 2wd body i had onto it for a daily driver but ive decided to just drive my 49k mile 86 silverado and sell this frame __________________ 72 2wd blazer 72 swb 4x4

03-01-2006, 11:34 PM	#5
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1972 k20 frame and axles f/s is this frame still available?if so let me know i may be interested thanks Mike

03-02-2006, 09:42 AM	#6
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: 1972 k20 frame and axles f/s if you are parting it out, I would be interested in the front axle....what is the gear ratio? __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

03-03-2006, 06:04 PM	#7
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 k20 frame and axles f/s it is still available. I am not sure on the gear ratio. i will not be parting it out though. Thanks, Keith __________________ 72 2wd blazer 72 swb 4x4

03-03-2006, 06:50 PM	#8
Big D Registered User Join Date: Apr 2005 Location: Dunlap, IL Posts: 308	Re: 1972 k20 frame and axles f/s Wheres this located in Illinois? If if reasonably close , Im interested. Thanks...... Dennis __________________ 68 GMC 64 1/2 Mustang convert A bachelor's life is no life for a single man." - Samuel Goldwyn

03-03-2006, 08:50 PM	#9
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1972 k20 frame and axles f/s hey Keith is there any way you can get that frame into tennessee so we could meet somewhere in between,i'm about 25 n/e of Atlanta if so let me know Mike

03-04-2006, 09:55 AM	#10
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Re: 1972 k20 frame and axles f/s Interested but need gear ratio.

03-04-2006, 11:26 AM	#11
MIDSTATE__67-72 Senior Member Join Date: Oct 2004 Location: decatur, il Posts: 199	Re: 1972 k20 frame and axles f/s they're 4:10 gears

03-04-2006, 04:51 PM	#12
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 k20 frame and axles f/s it is in assumption illinois. 20 miles south of decatur. thanks keith __________________ 72 2wd blazer 72 swb 4x4

03-06-2006, 09:04 AM	#13
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 k20 frame and axles f/s ttt __________________ 72 2wd blazer 72 swb 4x4

03-21-2006, 09:11 AM	#14
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 k20 frame and axles f/s one last time before ebay $350 __________________ 72 2wd blazer 72 swb 4x4

03-21-2006, 11:09 PM	#15
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Re: 1972 k20 frame and axles f/s I will check the map to see how far that is. Is it a dana 60 44 combo?



Register or Log In To remove these advertisements.

03-21-2006, 11:23 PM	#16
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: 1972 k20 frame and axles f/s is this a rolling frame?i asked before but no answer could you bring it part of the way down i would be glad to pay for the gas.does it have a power steering box and dics brakes? what about a transmission crossmember? does it have any damage or rust issues?thanks in advance Mike

03-22-2006, 09:08 AM	#17
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 k20 frame and axles f/s not sure on the rearend but the front is a 44 sorry i missed you down south you should have sent me a pm. ill go get it and bring it here to unionville tn but it will be 550 then and i must be prepaid i dont believe it has a ps box it does have the crossmembers i dont remember any rust issues with it but again i have only seen it once i bought it and had it delivered to my dads house in illinois it does have 2 angle iron plow brackets on the front that will need ground off __________________ 72 2wd blazer 72 swb 4x4 Last edited by meathead95; 03-22-2006 at 06:02 PM.

03-22-2006, 12:13 PM	#18
Brewski* Registered User Join Date: Aug 2001 Location: Rocky Mount, MO Posts: 1,293	Re: 1972 k20 frame and axles f/s The rear end is a 44? That can not be right? can it ?

03-22-2006, 06:02 PM	#19
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 k20 frame and axles f/s sorry brewski i just got off of a 12hr night shift and had my head in my a$$ when i said that __________________ 72 2wd blazer 72 swb 4x4

03-25-2006, 10:48 AM	#20
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 k20 frame and axles f/s sold thanks __________________ 72 2wd blazer 72 swb 4x4

Register or Log In To remove these advertisements.