What Ya'll get done this Mardi Gras Weekend? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 02-26-2006, 07:15 PM

No parade for me...I'm a party pooper. I finally was able to go up and play with the truck some this weekend. I finished hoking up the front crossmember from the 70, cleaned up a bit of the frame to install my newer power steering box. I'm going to be steaming the whole truck done, but I can't tow it until I had the front end all bolted backup. So I decided to clean off the rail around the power steering, and paint it an my new box befor I put them on. Also got the new shock on the truck. No more worn out low rider front end.

Not much, but it sure felt good to be back making a mess, I mean making progress. I even finally found my frame serial number. I still have not located it on the original 70's frame, but least I have a better idea where they actually put them.

For those of you that, like me, could never find them, the third shot shows where they are on the drivers frame rail.

71chevytruckguy · 02-26-2006, 07:18 PM

got the passenger door bolted on and lined with all new weatherstripping, put the hear box back on, got the radio wired up, dash painted, & passenger bed side painted. chris.

Southedisto · 02-26-2006, 07:41 PM

I started tearing apart stuff that I was going to use, but changed my mind (imagine that) so now I have some of that stuff for sale. Decided to change the exhaust fan in our 2nd bathroom, well it involved too much work so I left it dissassembled and went to the garage only to find my tore apart jimmy waiting on me. I installed the intake, a new oil filter, oil sending unit, was getting ready to prime the system and guess what?????????????????????????????????????????? I didnt install the oil pump shaft!!!!!!!!!!!!!!!!!! Oh man, was I a little upset. I started taking the oil pan off and decided to leave it since it was getting dark and cold and my shop light bulb burnt out. Oh yeah, can you help me adjust my new two barrel, it idles really rough.

jugernot · 02-26-2006, 07:51 PM

I picked up a pair of seats. I can't wait to sit in them. I will first have to figure out how to hook up all the power seat wires.

blazerboy72 · 02-26-2006, 08:19 PM

I got the 3/5 springs installed, put the fenders and hood back on, made the motor mounts for the LS1, and did a little cleaning on the motor.

krue · 02-26-2006, 08:29 PM

I got some junk loaded up to haul off, before the monsoon set in. Nothing since then. But I got all week to catch up.

Huskerboy2 · 02-26-2006, 09:39 PM

I got a few hours in today gutting the '68 motorhome. Next weekend, it's time to remove the outer aluminum skin and start hacking up the wooden framework. Filled a couple of dumpsters this weekend.

chops333 · 02-26-2006, 09:51 PM

put in the van tilt and hooked up the new tranny linkage man the tilt is sweet i didnt know what i was missing lol

kanuck · 02-26-2006, 09:56 PM

well, besides taking the kids to hockey and soccer on Saturday as per usual, I bought myself a nice set of KB .030 flat tops on Eagle H beam rods, that were used for one weekend, and I located a donor truck for my '67 cross member upgrade. Its a rotted '76 plain jane Silverado, but its complete. Gas tank had hole in it so the owner stopped driving it. Can have it for $350 or maybe a little less.

Hagen

matthufham · 02-26-2006, 10:00 PM

http://67-72chevytrucks.com/vboard/s...38#post1621538

got my engine in! now i can pull the truck another 2 feet into the garage since the engine takes up space in it's natural habitat now.

1971custom · 02-26-2006, 10:09 PM

I got the fenders on the 72 gmc 4x4 primed and painted then the hood and the cowl then worked cleaning the shop and waiting on the paint to dry so i could see them all shinney and lookin sweet, and im only 16 so ive got the time to learn .

chevyman07 · 02-26-2006, 10:27 PM

Well Im new here so hello everybody. But I scored some new repo front fenders for my 72, and they were free! I cant wait to put them on.

**71blksuper4x4** · 02-26-2006, 11:42 PM

My dad got some more progress on the time consuming Monster Truck. Over the past year it has gotten lifted around 5 more inches!!!!

Bringing the total lift to around 18-21 inches. I am excited to see it with the tires back on it. He lined up the bed and got it put back on. Fabbed up the crossover steering and also line up the body. Painted the shocks and got them on. Won't be long (fingers crossed, I have got a date as soon as this is done with a special lady)

70c10 · 02-26-2006, 11:59 PM

I got my reverse lights working, got my new white face cluster put back together, repainted my steering column (drying as I type) and tommorow night I reinstall the cluster. Pics to follow!

**fine69** · 02-27-2006, 12:08 AM

Too cold/windy to feel like doing too much. So i went and bought a new motorcycle Saturday. One thing i WONT have to work on this year.

stllookn · 02-27-2006, 12:13 AM

Ran out of primer while trying to finish spraying the inside of the '67 stepside...bummer!

wibilly · 02-27-2006, 12:15 AM

i spent friday night cleaning and wire wheeling my frame till 4am did some more saterday morning. i welded in some patches on back of cab welded up some screw holes on int. of cab cut out rusty frame crossmember and e- brake cabel brackets sanded cab cleaned it all and got it all primed with epoxy today from firewall back it finialy looks like i've gotten somthing done. besides disassembly. with most all the heavy cleaning and rust removal done it will be a little more enjoyable from this point. pics coming in the next week or so

subtle71 · 02-27-2006, 01:52 AM

Here is what I got done: http://67-72chevytrucks.com/vboard/s...26#post1621926

Bill, that is a good shot of the firewall. It has been a long time since I have seen that truck in gold. I will have to dig up some old pics that I have from 1988 or 1989 when my best friend got it from his grandfather. It was a sandlewood, goldish beige color with a white roof. Hopefully I can dig up some pics soon for you!

**Palf70Step** · 02-27-2006, 06:14 AM

Quote:

Originally Posted by subtle71

Here is what I got done: http://67-72chevytrucks.com/vboard/s...26#post1621926

Bill, that is a good shot of the firewall. It has been a long time since I have seen that truck in gold. I will have to dig up some old pics that I have from 1988 or 1989 when my best friend got it from his grandfather. It was a sandlewood, goldish beige color with a white roof. Hopefully I can dig up some pics soon for you!

Kool. Be nice to have some history with it.

shelby987 · 02-27-2006, 08:57 AM

For the first weekend in a LONG time....i was actually productive with my truck.....pulled the front hubs and replaced both inner and outter wheel bearings both sides (quite the friction fit on those races!), installed locking hubs on my front axle, put in a clutchable fan, and installed my PB booster......which of course meant my air cleaner no longer fit.....ahhh....its never ending!

GMCPerson · 02-27-2006, 09:06 AM

I installed the rear window in my 67. I tried installing the windshield and learned that if you hit the windshield with a hammer (even a "soft" deadblow), it will break. I guess that I will have a professional complete the next one. I was so close, it just would not quite set correctly. Oh well, lesson learned. The biggest regret is that I spent about 4 hours on the windshield that I could have been doing something else!

MrGoodpliers · 02-27-2006, 11:10 AM

I got my airbags installed on the back of my 'burb. I got the 6" drop kit from early classic, but when I let the jack down, I thought the thing was going thru the floor! It had about an inch between the u-bolt and the frame. Couldn't drive it like that, and I didn't want a C-notch. So, upgrade time! The ECE guys are great, they helped out with shipping, too. I never thought I would put bags on any of my vehicles, but I really like them. There may be some in my 68 elky's future too! I also got some relays installed on my headlights.

67ChevyRedneck · 02-27-2006, 01:56 PM

Painted my tailight housings inside/out. Painted my new sway bar with some rust encapsulator (now if UPS will settle my claim the bushings, brackets and bolts THEY LOST I could install the dang thing!) I also thorougly coated the inside/back of my new Goodmark '67 front fenders with rust encapsulator, they will also be coated with a bedliner material as well. I coated the rolled edge and inner window areas of my new Goodmark doors and filled the seams with some 3M sealer. I'm not too excited about trying to coat the inside of the doors... maybe next weekend.

lux hauler · 02-27-2006, 02:01 PM

I did some clean up on the front end and ordered all of the suspension/steering parts from NAPA....ball joints, tie rods, pitman, idler, a-arm saft assy, etc.

Didn't intend on spending that much but everything will be new.

I've got the drop spindles and 4" drop springs from GMCPaul's so.....next weekend I'll start the rebuild on the front end. Once that's finished, in goes the fresh 350/350 combo.

It's amazing how much gets done when you actually do some work.

shifty · 02-27-2006, 02:42 PM

Headers installed:

http://www.ls1tech.com/forums/showpo...5&postcount=71

Also, more info about later findings w/passenger side manifold:

http://www.ls1tech.com/forums/showthread.php?t=460521

02-26-2006, 07:15 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,997	What Ya'll get done this Mardi Gras Weekend? No parade for me...I'm a party pooper. I finally was able to go up and play with the truck some this weekend. I finished hoking up the front crossmember from the 70, cleaned up a bit of the frame to install my newer power steering box. I'm going to be steaming the whole truck done, but I can't tow it until I had the front end all bolted backup. So I decided to clean off the rail around the power steering, and paint it an my new box befor I put them on. Also got the new shock on the truck. No more worn out low rider front end. Not much, but it sure felt good to be back making a mess, I mean making progress. I even finally found my frame serial number. I still have not located it on the original 70's frame, but least I have a better idea where they actually put them. For those of you that, like me, could never find them, the third shot shows where they are on the drivers frame rail. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 02-26-2006 at 07:20 PM.

02-26-2006, 07:18 PM	#2
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: What Ya'll get done this Mardi Gras Weekend? got the passenger door bolted on and lined with all new weatherstripping, put the hear box back on, got the radio wired up, dash painted, & passenger bed side painted. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

02-26-2006, 07:41 PM	#3
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: What Ya'll get done this Mardi Gras Weekend? I started tearing apart stuff that I was going to use, but changed my mind (imagine that) so now I have some of that stuff for sale. Decided to change the exhaust fan in our 2nd bathroom, well it involved too much work so I left it dissassembled and went to the garage only to find my tore apart jimmy waiting on me. I installed the intake, a new oil filter, oil sending unit, was getting ready to prime the system and guess what?????????????????????????????????????????? I didnt install the oil pump shaft!!!!!!!!!!!!!!!!!! Oh man, was I a little upset. I started taking the oil pan off and decided to leave it since it was getting dark and cold and my shop light bulb burnt out. Oh yeah, can you help me adjust my new two barrel, it idles really rough. Attached Images __________________ I like wheelin in Dixie!

02-26-2006, 07:51 PM	#4
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: What Ya'll get done this Mardi Gras Weekend? I picked up a pair of seats. I can't wait to sit in them. I will first have to figure out how to hook up all the power seat wires. Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

02-26-2006, 08:19 PM	#5
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: What Ya'll get done this Mardi Gras Weekend? I got the 3/5 springs installed, put the fenders and hood back on, made the motor mounts for the LS1, and did a little cleaning on the motor. Attached Images

02-26-2006, 08:29 PM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: What Ya'll get done this Mardi Gras Weekend? I got some junk loaded up to haul off, before the monsoon set in. Nothing since then. But I got all week to catch up. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-26-2006, 09:39 PM	#7
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: What Ya'll get done this Mardi Gras Weekend? I got a few hours in today gutting the '68 motorhome. Next weekend, it's time to remove the outer aluminum skin and start hacking up the wooden framework. Filled a couple of dumpsters this weekend. __________________ '72 Chevy Blazer

02-26-2006, 09:51 PM	#8
chops333 Registered User Join Date: Aug 2005 Location: mount airy n.c. Posts: 243	Re: What Ya'll get done this Mardi Gras Weekend? put in the van tilt and hooked up the new tranny linkage man the tilt is sweet i didnt know what i was missing lol

02-26-2006, 09:56 PM	#9
kanuck Registered User Join Date: Dec 2005 Location: canada Posts: 166	Re: What Ya'll get done this Mardi Gras Weekend? well, besides taking the kids to hockey and soccer on Saturday as per usual, I bought myself a nice set of KB .030 flat tops on Eagle H beam rods, that were used for one weekend, and I located a donor truck for my '67 cross member upgrade. Its a rotted '76 plain jane Silverado, but its complete. Gas tank had hole in it so the owner stopped driving it. Can have it for $350 or maybe a little less. Hagen __________________ '70 Malibu with 383 stroker/T350 '56 SWB Mercury pickup..under construction '67 Firebird Convertible...all done stock '70 LWB 350 on propane...beater '69 LWB 350/T400 body restored

02-26-2006, 10:00 PM	#10
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: What Ya'll get done this Mardi Gras Weekend? http://67-72chevytrucks.com/vboard/s...38#post1621538 got my engine in! now i can pull the truck another 2 feet into the garage since the engine takes up space in it's natural habitat now.

02-26-2006, 10:09 PM	#11
1971custom Registered User Join Date: Apr 2005 Location: south west nebraska Posts: 244	Re: What Ya'll get done this Mardi Gras Weekend? I got the fenders on the 72 gmc 4x4 primed and painted then the hood and the cowl then worked cleaning the shop and waiting on the paint to dry so i could see them all shinney and lookin sweet, and im only 16 so ive got the time to learn .

02-26-2006, 10:27 PM	#12
chevyman07 Registered User Join Date: Nov 2005 Location: georgia Posts: 22	Re: What Ya'll get done this Mardi Gras Weekend? Well Im new here so hello everybody. But I scored some new repo front fenders for my 72, and they were free! I cant wait to put them on.

02-26-2006, 11:42 PM	#13
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,155	Re: What Ya'll get done this Mardi Gras Weekend? My dad got some more progress on the time consuming Monster Truck. Over the past year it has gotten lifted around 5 more inches!!!! Bringing the total lift to around 18-21 inches. I am excited to see it with the tires back on it. He lined up the bed and got it put back on. Fabbed up the crossover steering and also line up the body. Painted the shocks and got them on. Won't be long (fingers crossed, I have got a date as soon as this is done with a special lady) Attached Images __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-26-2006, 11:59 PM	#14
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: What Ya'll get done this Mardi Gras Weekend? I got my reverse lights working, got my new white face cluster put back together, repainted my steering column (drying as I type) and tommorow night I reinstall the cluster. Pics to follow! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 02-27-2006 at 12:00 AM.

02-27-2006, 12:08 AM	#15
fine69 Senior Member Join Date: Dec 1999 Location: Urbana,Ohio,USA Posts: 4,618	Re: What Ya'll get done this Mardi Gras Weekend? Too cold/windy to feel like doing too much. So i went and bought a new motorcycle Saturday. One thing i WONT have to work on this year. __________________ 2008 Chevy HHR 1/2 panel. 1949 Chevy Panel truck(just sittin, waiting) Board member #6



Register or Log In To remove these advertisements.

02-27-2006, 12:13 AM	#16
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: What Ya'll get done this Mardi Gras Weekend? Ran out of primer while trying to finish spraying the inside of the '67 stepside...bummer! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

02-27-2006, 12:15 AM	#17
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: What Ya'll get done this Mardi Gras Weekend? i spent friday night cleaning and wire wheeling my frame till 4am did some more saterday morning. i welded in some patches on back of cab welded up some screw holes on int. of cab cut out rusty frame crossmember and e- brake cabel brackets sanded cab cleaned it all and got it all primed with epoxy today from firewall back it finialy looks like i've gotten somthing done. besides disassembly. with most all the heavy cleaning and rust removal done it will be a little more enjoyable from this point. pics coming in the next week or so __________________ common sense isn't so common anymore

02-27-2006, 01:52 AM	#18
subtle71 Granddad's Ol' Truck Join Date: Jan 2005 Location: MS Posts: 588	Re: What Ya'll get done this Mardi Gras Weekend? Here is what I got done: http://67-72chevytrucks.com/vboard/s...26#post1621926 Bill, that is a good shot of the firewall. It has been a long time since I have seen that truck in gold. I will have to dig up some old pics that I have from 1988 or 1989 when my best friend got it from his grandfather. It was a sandlewood, goldish beige color with a white roof. Hopefully I can dig up some pics soon for you! __________________ *1971 Chevrolet Custom 10 short step-side* *2005 GMC Sierra SLT 2500HD crew cab 2wd* [I]1971 Chevrolet Custom 10 Deluxe lwb fleet-side

02-27-2006, 08:57 AM	#20
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: What Ya'll get done this Mardi Gras Weekend? For the first weekend in a LONG time....i was actually productive with my truck.....pulled the front hubs and replaced both inner and outter wheel bearings both sides (quite the friction fit on those races!), installed locking hubs on my front axle, put in a clutchable fan, and installed my PB booster......which of course meant my air cleaner no longer fit.....ahhh....its never ending! __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

02-27-2006, 09:06 AM	#21
GMCPerson Junior Member Join Date: Oct 2003 Location: Milford, MI Posts: 192	Re: What Ya'll get done this Mardi Gras Weekend? I installed the rear window in my 67. I tried installing the windshield and learned that if you hit the windshield with a hammer (even a "soft" deadblow), it will break. I guess that I will have a professional complete the next one. I was so close, it just would not quite set correctly. Oh well, lesson learned. The biggest regret is that I spent about 4 hours on the windshield that I could have been doing something else!

02-27-2006, 11:10 AM	#22
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Re: What Ya'll get done this Mardi Gras Weekend? I got my airbags installed on the back of my 'burb. I got the 6" drop kit from early classic, but when I let the jack down, I thought the thing was going thru the floor! It had about an inch between the u-bolt and the frame. Couldn't drive it like that, and I didn't want a C-notch. So, upgrade time! The ECE guys are great, they helped out with shipping, too. I never thought I would put bags on any of my vehicles, but I really like them. There may be some in my 68 elky's future too! I also got some relays installed on my headlights. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

02-27-2006, 01:56 PM	#23
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: What Ya'll get done this Mardi Gras Weekend? Painted my tailight housings inside/out. Painted my new sway bar with some rust encapsulator (now if UPS will settle my claim the bushings, brackets and bolts THEY LOST I could install the dang thing!) I also thorougly coated the inside/back of my new Goodmark '67 front fenders with rust encapsulator, they will also be coated with a bedliner material as well. I coated the rolled edge and inner window areas of my new Goodmark doors and filled the seams with some 3M sealer. I'm not too excited about trying to coat the inside of the doors... maybe next weekend. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-27-2006, 02:01 PM	#24
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Re: What Ya'll get done this Mardi Gras Weekend? I did some clean up on the front end and ordered all of the suspension/steering parts from NAPA....ball joints, tie rods, pitman, idler, a-arm saft assy, etc. Didn't intend on spending that much but everything will be new. I've got the drop spindles and 4" drop springs from GMCPaul's so.....next weekend I'll start the rebuild on the front end. Once that's finished, in goes the fresh 350/350 combo. It's amazing how much gets done when you actually do some work. __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

02-27-2006, 02:42 PM	#25
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: What Ya'll get done this Mardi Gras Weekend? Headers installed: http://www.ls1tech.com/forums/showpo...5&postcount=71 Also, more info about later findings w/passenger side manifold: http://www.ls1tech.com/forums/showthread.php?t=460521 __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

Register or Log In To remove these advertisements.