May be you guys can help me - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84 400 · 03-05-2006, 11:25 PM

okay i have a 84 c10 silverado. It has 400 in it with edlbrok 650 carb and manifold. it also has headers and flowmaster exhaust. Thats all i really know about the motor as it was installed before i bought the truck. I know it by no means a stick motor and wish i knew wat cam and rocker/ heads the builder put in. I know it was a professional job and built down in Georgia. Any ways not that that matters but my ? is is there a D.O.T. approved slick like tire i can run behind this beast?? I really wish i could run white letter Hoosiers but have no idea if they make them DOT approved or not. also i am running rims that are maybe 2 inch wider then stock. any ideas. is ther a fatter tire i could run on a stock rim? Thanks alot
Ian

82c10 · 03-05-2006, 11:33 PM

i have heard of a lot of people liking the mickey thompson e/t streets

hotrodhomi · 03-06-2006, 01:22 AM

^^^ what he said

C-10volvo · 03-06-2006, 10:50 AM

i put thoes et streets on a set of wheels for my volvo when i want to play. after i fab'd up my turbo system, stock meats just cant hook up. anyways, i get pulled over all the time when i take it out. never get any tickets because it says they're DOT legal on the sidewall, but its annoying.

Chevrolet4x4s · 03-13-2006, 11:23 PM

If you dont have observent police in your area you could get some NASCAR Goodyear Eagles turn them backwards so that they would be blackwalls You can get them in 28x10-15 or 27.5X12- 15. You can get them from Muscle Motorsports http://musclemotorsports.com/drivetr...car-tires.html
"NASCAR tires come in basically two sizes as shown below. The 10" wide tire is a Speedway Tire used at Daytona and Talladega Speedways. The 12" wide tire comes in many compounds (softness) based on the track where it's run.

Tire prices range based upon tire condition. If you want tires for souvenier purposes prices range in the $5 to $25 range. If you want tires for racing, call us so we can get you something that meets your specific needs."
You could probally get by with the $5-$25 rangs since they wont be run at 200 mph and compounds wouldnt matter that much .Also you could probally stamp D.O.T on the small falt raised area of the tire sidewall from the mold and get by with it...Or pay $250 a tire for "legal slicks"

Shane

piecesparts · 03-14-2006, 12:32 AM

I believe that if you look, the Hoosiers are a DOT type tire. Ihave some Buick Geand National Freak buddies that are running them and going to the strip and pulling some serious single digit times with them. Do the cops in your area actually look at the tires?

By the way, the Edelbrock may not be a 650 carb, unless it is the new AVS model. The early models were rated at 600CFm which broke down to about 625 CFM in reality.

03-05-2006, 11:25 PM	#1
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	May be you guys can help me okay i have a 84 c10 silverado. It has 400 in it with edlbrok 650 carb and manifold. it also has headers and flowmaster exhaust. Thats all i really know about the motor as it was installed before i bought the truck. I know it by no means a stick motor and wish i knew wat cam and rocker/ heads the builder put in. I know it was a professional job and built down in Georgia. Any ways not that that matters but my ? is is there a D.O.T. approved slick like tire i can run behind this beast?? I really wish i could run white letter Hoosiers but have no idea if they make them DOT approved or not. also i am running rims that are maybe 2 inch wider then stock. any ideas. is ther a fatter tire i could run on a stock rim? Thanks alot Ian __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

03-05-2006, 11:33 PM	#2
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	Re: May be you guys can help me i have heard of a lot of people liking the mickey thompson e/t streets __________________ *SWB Stands for Short Wide Bed*

03-06-2006, 01:22 AM	#3
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: May be you guys can help me ^^^ what he said __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

03-06-2006, 10:50 AM	#4
C-10volvo Registered User Join Date: May 2003 Location: Lake Oswego, Oregon Posts: 1,028	Re: May be you guys can help me i put thoes et streets on a set of wheels for my volvo when i want to play. after i fab'd up my turbo system, stock meats just cant hook up. anyways, i get pulled over all the time when i take it out. never get any tickets because it says they're DOT legal on the sidewall, but its annoying. __________________ Ken Morgan For fun: 1964 Volvo 122 For slow: 1984 Chevrolet C-10 For everything else: 1997 BMW M3

03-13-2006, 11:23 PM	#5
Chevrolet4x4s Registered User Join Date: Nov 2005 Location: WV Posts: 227	Re: May be you guys can help me If you dont have observent police in your area you could get some NASCAR Goodyear Eagles turn them backwards so that they would be blackwalls You can get them in 28x10-15 or 27.5X12- 15. You can get them from Muscle Motorsports http://musclemotorsports.com/drivetr...car-tires.html "NASCAR tires come in basically two sizes as shown below. The 10" wide tire is a Speedway Tire used at Daytona and Talladega Speedways. The 12" wide tire comes in many compounds (softness) based on the track where it's run. Tire prices range based upon tire condition. If you want tires for souvenier purposes prices range in the $5 to $25 range. If you want tires for racing, call us so we can get you something that meets your specific needs." You could probally get by with the $5-$25 rangs since they wont be run at 200 mph and compounds wouldnt matter that much .Also you could probally stamp D.O.T on the small falt raised area of the tire sidewall from the mold and get by with it...Or pay $250 a tire for "legal slicks" Shane __________________ 1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327

03-14-2006, 12:32 AM	#6
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: May be you guys can help me I believe that if you look, the Hoosiers are a DOT type tire. Ihave some Buick Geand National Freak buddies that are running them and going to the strip and pulling some serious single digit times with them. Do the cops in your area actually look at the tires? By the way, the Edelbrock may not be a 650 carb, unless it is the new AVS model. The early models were rated at 600CFm which broke down to about 625 CFM in reality.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.