Can you please post pics of your lowered '67-72? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

REPO1 · 07-24-2002, 12:52 AM

I know this has probobly been asked about 100 times, sorry.

Lets see your pics of your trucks that are lowered, as well, could you please state how much you lowered it, and with what method. Tire sizes would be great.

(I want to save this thread for future reference)

Thanks!
Reid

Alexis · 07-24-2002, 12:57 AM

101 now...........lol i'm playing

Name: Britney
Year:1970
Type: K/5 Blazer
PowerTrain: 307/th350 12-bolt 3.73posi
Suspesion: Early Classic 4/6 drop
Front: 2.5 inch drop Spindle/ 1.5 inch Spring
Rear: 6 inch drop coils/panhard bar/ shock relocator
Wheels: Truck Ralleys
Front: 15x8 255/60/15
Rear:15x10 275/60/15

*racedvl* · 07-24-2002, 01:05 AM

Alex.....tisk, tisk. You should know better. Britney is not a k/5....she's a C/5.

Alexis · 07-24-2002, 01:29 AM

didnt; matter with the blazer they all carried the k/5 blazer emblem on them hehehe:p though your right it is a c/5 but its a blazer and it 2wd......so it special

**Classic Heartbeat** · 07-24-2002, 02:36 AM

Here is one of my 67 Panel. It has a 4/6 drop. WES www.ClassicHeartbeat.com

big.l.a · 07-24-2002, 07:34 AM

I would If I knew how to do it from my PC

Frank_Zeller · 07-24-2002, 08:46 AM

3/6 drop ECE rear set up front cut coil. Redoing the front with ECE spindles and springs (4inch). Rear springs have air products air bags so I can still haul and tow.

Low69CST · 07-24-2002, 09:21 AM

He's the last pic I have of my truck with a body and engine/trans in it. The front stance is about where i'm going to be. I'm going to bring the rear down more with some homemade lowering blocks.

In the pic:
Front 2.5" drop disc spindles, original front springs w/1/4 coil cut out.

Rear: 3" drop springs, Early Classic extended track bar and shock relocators.

dubie · 07-24-2002, 10:05 AM

Hey REPO1, I went through Sylvan Lake on July 10th. I was there for only 2 hours or so, visiting some friends of the family. You may have seen Larry with his Charger at some of the local shows. He has a 70 Charger that is Light metallic blue with a white top and an all original Magnum 383. I will be coming throught here again , but not till next year sometime. I'll have to look you up next time.

72futuresweet2wd · 07-24-2002, 10:57 AM

Here is mine.

Slammed67 · 07-24-2002, 01:43 PM

It's not really lowered..... it's SLAMMED!

chevjayfsd · 07-24-2002, 01:54 PM

5.5/4 drop

PrimeredThunder · 07-24-2002, 03:48 PM

Here's my 72'! Not sure on the drop, but its had front coils cut and in the rear with drop coils, 3 inch blocks and relocators I believe? Maybe its a 4/5? I bet one of you guys can make a better guess that me though,. To be honest, I'd rather have bags though, easier to get under it when you can raise it up..lowered trucks suck if you forget to bring your jack stands home

Kenny

XXL · 07-24-2002, 04:27 PM

Amount lowered can be measured in feet... but I haven't bothered to actually do that

Slammed67 and I are at about the same place (but he's going to have to raise his a tad once he gets the front sheetmetal on it.

Lowering method--

Front = spindles and air
Rear = blocks, air, long Panhard bar, frame notch

Kenneth

brad69C-10 · 07-24-2002, 04:39 PM

This is mine, before I started my resto.......

72chevyLWB · 07-24-2002, 06:58 PM

3/5 drop with 255/50/17 Bridgeston Potenza RE730's

Wasted Income · 07-24-2002, 07:12 PM

Yooper lowering job
Front-Cut coils
Rear-Heated coils with lowering blocks
Rides Like $hit.
I don't recommend this method (unless you're poor and in high school like I was)

Soon to have dropped spindles (does anybody have some for sale?) and Eibach lowering springs up front, and QA4 coilover in the rear.

**Tim Christian** · 07-24-2002, 08:56 PM

3in drop sprins in the front with 15x7 rims with 3.75 back spacing and a 225/70/15 tire and 4in drop spring in the rear with 15x10 rims with 4.25 back spacing and a 275x60x15 tire

**Tim Christian** · 07-24-2002, 08:58 PM

It might help if I post the picture!

**BOSS** · 07-24-2002, 09:00 PM

here is mine.not sure about the drop,thats how i bought it

SCOTI · 07-24-2002, 09:11 PM

Front: 2.5 spindles, stock coils w/1 coil removed, later model 3/4 ton sway bar w/urethane bushings
Back : 1.5 blocks, air bags, adj panhard bar, bolt-in c-section thats welded for insurance.

REPO1 · 07-24-2002, 09:47 PM

Keep 'em coming! There are alot more slammed trucks than I thought!

Looks like a 4/6 is the way to go. I would love to bag it, but the cost is a bit steep for me right now. Got to have paint first.

Slammed67 · 07-25-2002, 12:03 AM

Kenneth (XXL): Raise it up a tad?????? But I worked so hard to get it that low!!!

Yeah, I'll most likely end up installing some bump stops to keep the front from sitting on the ground. I had about an inch clearance, but the addition of the cab cut that in half!

SCOTI: I really like the stance of your truck. Cool!

383 Stroker · 07-25-2002, 12:14 AM

Here's mine. 3.5"/4"

jhwkns · 07-25-2002, 12:39 AM

2/4 drop. early classics springs

07-24-2002, 12:52 AM	#1
REPO1 Shortbox wanna-be. Join Date: Mar 2002 Location: Fort St.John, British Columbia, Canada Posts: 773	Can you please post pics of your lowered '67-72? I know this has probobly been asked about 100 times, sorry. Lets see your pics of your trucks that are lowered, as well, could you please state how much you lowered it, and with what method. Tire sizes would be great. (I want to save this thread for future reference) Thanks! Reid __________________ 1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH)

07-24-2002, 12:57 AM	#2
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	101 now...........lol i'm playing Name: Britney Year:1970 Type: K/5 Blazer PowerTrain: 307/th350 12-bolt 3.73posi Suspesion: Early Classic 4/6 drop Front: 2.5 inch drop Spindle/ 1.5 inch Spring Rear: 6 inch drop coils/panhard bar/ shock relocator Wheels: Truck Ralleys Front: 15x8 255/60/15 Rear:15x10 275/60/15 Last edited by Alexis; 07-24-2002 at 01:08 AM.

07-24-2002, 02:36 AM	#5
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Here is one of my 67 Panel. It has a 4/6 drop. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 06:30 PM.

07-24-2002, 07:34 AM	#6
big.l.a Registered User Join Date: Jan 2002 Location: Allen, TX. USA Posts: 210	PIC OF DROP TRUCK I would If I knew how to do it from my PC __________________ 71 C10 LWB With Edelbrock 7101& 1406 Carb Accel HEI Blue Print Accel 8.8 Wires Soon to have possi & 186 Camel hump heads Dropped 2-1/2F&4R Dynomax Headers Duals Flowtech Aftburners Tonneau Cover Frm 89 F150 79 Monte C

07-24-2002, 08:46 AM	#7
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	3/6 drop ECE rear set up front cut coil. Redoing the front with ECE spindles and springs (4inch). Rear springs have air products air bags so I can still haul and tow. Attached Images __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas Last edited by Frank_Zeller; 07-25-2002 at 11:05 AM.

07-24-2002, 01:05 AM	#3
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Alex.....tisk, tisk. You should know better. Britney is not a k/5....she's a C/5.

07-24-2002, 01:29 AM	#4
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	didnt; matter with the blazer they all carried the k/5 blazer emblem on them hehehe:p though your right it is a c/5 but its a blazer and it 2wd......so it special

07-24-2002, 09:21 AM	#8
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	really old pics of my truck He's the last pic I have of my truck with a body and engine/trans in it. The front stance is about where i'm going to be. I'm going to bring the rear down more with some homemade lowering blocks. In the pic: Front 2.5" drop disc spindles, original front springs w/1/4 coil cut out. Rear: 3" drop springs, Early Classic extended track bar and shock relocators. __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

07-24-2002, 10:05 AM	#9
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	Hey REPO1, I went through Sylvan Lake on July 10th. I was there for only 2 hours or so, visiting some friends of the family. You may have seen Larry with his Charger at some of the local shows. He has a 70 Charger that is Light metallic blue with a white top and an all original Magnum 383. I will be coming throught here again , but not till next year sometime. I'll have to look you up next time. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

07-24-2002, 10:57 AM	#10
72futuresweet2wd The face of my 69 c10 Join Date: Jan 2001 Location: Central Indiana Posts: 171	Here is mine. Attached Images __________________ 2002 Harley Davidson VRod 1972 2wd Blazer (Project) 1969 Chevy C10 (Driver) 2002 Chevy Trailblazer (Wifes) Last edited by 72futuresweet2wd; 07-24-2002 at 10:59 AM.

07-24-2002, 01:43 PM	#11
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	It's not really lowered..... it's SLAMMED! __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

07-24-2002, 01:54 PM	#12
chevjayfsd Project 7dos Join Date: Aug 2001 Location: Abilene, Texas Posts: 876	5.5/4 drop Attached Images __________________ 7DOS - 1972 C-10 350/350 Porterbuilt/Accuair 20x8.5/20x10 Ride Low or Die PSSST - Yes it's bagged. 7dos build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=610290

07-24-2002, 03:48 PM	#13
PrimeredThunder Back from the Dead Join Date: Dec 2001 Location: Salem, Oregon Posts: 522	Here's my 72'! Not sure on the drop, but its had front coils cut and in the rear with drop coils, 3 inch blocks and relocators I believe? Maybe its a 4/5? I bet one of you guys can make a better guess that me though,. To be honest, I'd rather have bags though, easier to get under it when you can raise it up..lowered trucks suck if you forget to bring your jack stands home Kenny __________________ The only Carb that matters to me is the one under my hood! Salem, Oregon

07-24-2002, 04:27 PM	#14
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Amount lowered can be measured in feet... but I haven't bothered to actually do that Slammed67 and I are at about the same place (but he's going to have to raise his a tad once he gets the front sheetmetal on it. Lowering method-- Front = spindles and air Rear = blocks, air, long Panhard bar, frame notch Kenneth __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

07-24-2002, 04:39 PM	#15
brad69C-10 Registered User Join Date: Jul 2002 Location: Ky. Posts: 35	This is mine, before I started my resto....... Attached Images __________________ 69 C-10 Pro Street...........red on black...........big block and a lot of go fast stuff under the hood Still in progress ...........



Register or Log In To remove these advertisements.

07-24-2002, 06:58 PM	#16
72chevyLWB Got 20's???? Join Date: Oct 2001 Location: Aberdeen SD Posts: 1,451	3/5 drop with 255/50/17 Bridgeston Potenza RE730's Attached Images __________________ 99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road.

07-24-2002, 07:12 PM	#17
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Yooper lowering job Front-Cut coils Rear-Heated coils with lowering blocks Rides Like $hit. I don't recommend this method (unless you're poor and in high school like I was) Soon to have dropped spindles (does anybody have some for sale?) and Eibach lowering springs up front, and QA4 coilover in the rear. Attached Images __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

07-24-2002, 08:56 PM	#18
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	3in drop sprins in the front with 15x7 rims with 3.75 back spacing and a 225/70/15 tire and 4in drop spring in the rear with 15x10 rims with 4.25 back spacing and a 275x60x15 tire

07-24-2002, 08:58 PM	#19
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	It might help if I post the picture! Attached Images

07-24-2002, 09:00 PM	#20
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	here is mine.not sure about the drop,thats how i bought it Attached Images __________________ Support our site Norwood Survivor

07-24-2002, 09:11 PM	#21
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,997	Front: 2.5 spindles, stock coils w/1 coil removed, later model 3/4 ton sway bar w/urethane bushings Back : 1.5 blocks, air bags, adj panhard bar, bolt-in c-section thats welded for insurance. Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-24-2002, 09:47 PM	#22
REPO1 Shortbox wanna-be. Join Date: Mar 2002 Location: Fort St.John, British Columbia, Canada Posts: 773	Keep 'em coming! There are alot more slammed trucks than I thought! Looks like a 4/6 is the way to go. I would love to bag it, but the cost is a bit steep for me right now. Got to have paint first. __________________ 1970 Chevy C20 Custom Camper 402BB Turbo 400 trans. (Slowly becoming a '70 shortbox 1/2 ton) '71 Camaro SS 402/T400 resto '97 Z28 (11.41@127MPH)

07-25-2002, 12:03 AM	#23
Slammed67 Progress = 0% Join Date: Nov 2001 Location: Kansas City, MO Posts: 2,108	Kenneth (XXL): Raise it up a tad?????? But I worked so hard to get it that low!!! Yeah, I'll most likely end up installing some bump stops to keep the front from sitting on the ground. I had about an inch clearance, but the addition of the cab cut that in half! SCOTI: I really like the stance of your truck. Cool! __________________ Jason - '67 GMC swb \| '57 Bel-Air 4dr hardtop \| '56 210 4dr Wagon \| 2000 GMC Sierra

07-25-2002, 12:14 AM	#24
383 Stroker Registered User Join Date: Aug 2001 Location: Jesup, GA Posts: 571	Here's mine. 3.5"/4" Attached Images __________________ Video's of my Truck Racing 1967 C-10, 383ci Sbc, TH350, 3200 stall, 3.73 gear

07-25-2002, 12:39 AM	#25
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	2/4 drop. early classics springs Attached Images __________________ I intend to live forever. So far, so good.

Register or Log In To remove these advertisements.