seats...bolt right up. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*MisterMan* · 03-20-2006, 12:37 AM

ADDED:

PICS!!!!

>>>

http://i7.photobucket.com/albums/y29...3/DSCF0671.jpg

http://i7.photobucket.com/albums/y29...3/DSCF0670.jpg

http://i7.photobucket.com/albums/y29...3/DSCF0669.jpg

http://i7.photobucket.com/albums/y29...3/DSCF0668.jpg

http://i7.photobucket.com/albums/y29...3/DSCF0667.jpg

(pass. side is a lil cock-eyed....i bent a bracket removing them....have to shim it.....)

Up date:{ClemsonChevy} they do not bolt up to stock mounts, drilling is req. up they line up perfectally on the floor. drilling is a snap tho...unless u have no drill!!!!

ATTENTION....ford tourus (sp) seats bolt right up. the brackets on the front have a bend to them.....this matches perfectally on the stock lil "hump" to rise the front of the stock bench up. Have them in on my 71' gmc serria lb. look great...and they were free!!!!

--Denny

Longhorn Man · 03-20-2006, 12:41 AM

pics?
comfortable?
Do they look stupid?

BubbaGreen · 03-20-2006, 12:41 AM

Pics? Post em if you can....

byrd · 03-20-2006, 12:49 AM

years? Pics Please!!!!

*MisterMan* · 03-20-2006, 12:54 AM

Quote:

Originally Posted by Longhorn Man

pics?
comfortable?
Do they look stupid?

pics... soon.....comfortable... hell yea....look stupid. kinda....only when u realize u can see the gas tank/ un painted portion of the floor. lol.... these seats were off a ..96??... and in 03' it was parked....3 or so months after that the windows were shattered....there goes the seasons.....so they had buku mold on them....bleach, soap, and floor cleaning machene worked wonders.....now to remove the musty smell....i may have hot boxed my truck /w/ incents... hahahahah

only problems we had was drilling in the rain/ dark....only had 1 drop light....so..... 4 hours later we were satisfied.

--den

ClemsonChevy · 03-20-2006, 01:16 AM

Quote:

Originally Posted by MisterMan

ATTENTION....ford tourus (sp) seats bolt right up. the brackets on the front have a bend to them.....this matches perfectally on the stock lil "hump" to rise the front of the stock bench up. Have them in on my 71' gmc serria lb. look great...and they were free!!!!

--Denny

Quote:

Originally Posted by MisterMan

pics... soon.....comfortable... hell yea....look stupid. kinda....only when u realize u can see the gas tank/ un painted portion of the floor. lol.... these seats were off a ..96??... and in 03' it was parked....3 or so months after that the windows were shattered....there goes the seasons.....so they had buku mold on them....bleach, soap, and floor cleaning machene worked wonders.....now to remove the musty smell....i may have hot boxed my truck /w/ incents... hahahahah

only problems we had was drilling in the rain/ dark....only had 1 drop light....so..... 4 hours later we were satisfied.

--den

SO, they don't BOLT up, but FIT the floor profile? Still would be pretty sweet. PICS PICS PICS PICS

*MisterMan* · 03-20-2006, 01:18 AM

Quote:

Originally Posted by ClemsonChevy

SO, they don't BOLT up, but FIT the floor profile? Still would be pretty sweet. PICS PICS PICS PICS

indeed. drilling IS requied...but do line up flawlessly to the floor.

72armyswbtruck · 03-20-2006, 02:05 AM

Anxiously awaiting pics

70c10 · 03-20-2006, 09:17 AM

My buddy has 96' Taurus seats in his 75' Ram and they are nice!. His has 2 buckets with a matching center console and they are really comfortable.

shifty · 03-20-2006, 11:50 AM

can't wait to see pictures.

jay-dawg · 03-20-2006, 11:55 AM

me too

*MisterMan* · 03-22-2006, 09:00 PM

pics!!!!!!! (see above!!!)

Bob Moore · 03-22-2006, 09:33 PM

Misterman - sounds very interesting. I am not looking for a date but how big are you? Short - tall - thin - husky? Seems that they might be the answer for me but I am somewhat short and overly husky. Would they work?

Thanks - Bob

ClemsonChevy · 03-22-2006, 09:46 PM

Looks like fold down armrests as well! Sweet! I like em! Now you need to find a console to fit between em and hold cold drinks!

*MisterMan* · 03-23-2006, 02:15 AM

Quote:

Originally Posted by Bob Moore

Misterman - sounds very interesting. I am not looking for a date but how big are you? Short - tall - thin - husky? Seems that they might be the answer for me but I am somewhat short and overly husky. Would they work?

Thanks - Bob

bob, im 6'1 and 150 lbs. lol. im the exact opposite of you. but yes. i believe they would work exellent for you....

ClemsonChevy:

yeah. accually i flipfloped it....the pass is the drivers... the drivers is the pass.... i did this to remove the stock arm rest's on the doosr for a cleaner look....soon i will re finish it. (cover the holes) as far as a cup holer...i was thinking 3 8's !!! (subwoofers)/ intergrated cup holders.. haha... I WIN!! LOL

--thanks for the +'s

--den

Putter · 03-23-2006, 11:34 AM

Looks good. My ONLY suggestion would be to swap the sides back.
I get why you did it, but that way you could have factory truck arm rests on the doors, and seat arm rests for your other arm in the middle.

Subwoofers....plus....softdrink in cupholder....equals.....FIZZY DRINK!
Nothing like a bouncing Dr. Pepper to get you going!

Looks good though.

*MisterMan* · 03-23-2006, 03:12 PM

Quote:

Originally Posted by Putter

Looks good. My ONLY suggestion would be to swap the sides back.
I get why you did it, but that way you could have factory truck arm rests on the doors, and seat arm rests for your other arm in the middle.

Subwoofers....plus....softdrink in cupholder....equals.....FIZZY DRINK!
Nothing like a bouncing Dr. Pepper to get you going!

Looks good though.

soada??/ naw... beer. bahaha j/k.

i didnt like the arm rests....and when i re apholster them it will look sweet i think..... (no arm rest in the middle ='s closer to g/f.)

moneyguru · 03-23-2006, 03:24 PM

Looks like 3 of your pis are sideways, but that's easy to fix!
Log into your photobucket account and click edit on the pic that is
currently displayed sideways. A enw page will open up with a thumbnail of
your pic and at the bottom of the page there is the option to rotate the pic
clockwise 90, 180 or 270 degrees.

Seats look good though, and the price was definitely right!

Mechdawg · 03-23-2006, 03:41 PM

I dont have any pics but I did pick up a couple of front buckets from a 91 or 92 honda civic they fit pretty nice had to bolt them up to some L brackets up front and a spacer in the rear new holes also needed. All very easy to do and with the head rest pulled out they sit below the window line. They ended up looking pretty nice sadly I sold that truck and didnt get any pics.

**FRENCHBLUE72** · 03-23-2006, 10:16 PM

Those look like they fit pretty good...

03-20-2006, 12:37 AM	#1
MisterMan Account Suspended Join Date: Jan 2006 Location: Visalia, California Posts: 286	seats...bolt right up. ADDED: PICS!!!! >>> http://i7.photobucket.com/albums/y29...3/DSCF0671.jpg http://i7.photobucket.com/albums/y29...3/DSCF0670.jpg http://i7.photobucket.com/albums/y29...3/DSCF0669.jpg http://i7.photobucket.com/albums/y29...3/DSCF0668.jpg http://i7.photobucket.com/albums/y29...3/DSCF0667.jpg (pass. side is a lil cock-eyed....i bent a bracket removing them....have to shim it.....) Up date:{ClemsonChevy} they do not bolt up to stock mounts, drilling is req. up they line up perfectally on the floor. drilling is a snap tho...unless u have no drill!!!! ATTENTION....ford tourus (sp) seats bolt right up. the brackets on the front have a bend to them.....this matches perfectally on the stock lil "hump" to rise the front of the stock bench up. Have them in on my 71' gmc serria lb. look great...and they were free!!!! --Denny Last edited by MisterMan; 03-22-2006 at 09:00 PM.

03-20-2006, 12:41 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: seats...bolt right up. pics? comfortable? Do they look stupid?

03-20-2006, 12:41 AM	#3
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	Re: seats...bolt right up. Pics? Post em if you can.... __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

03-20-2006, 02:05 AM	#8
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: seats...bolt right up. Anxiously awaiting pics __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

03-20-2006, 09:17 AM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: seats...bolt right up. My buddy has 96' Taurus seats in his 75' Ram and they are nice!. His has 2 buckets with a matching center console and they are really comfortable. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-20-2006, 11:50 AM	#10
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: seats...bolt right up. can't wait to see pictures. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-20-2006, 11:55 AM	#11
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	Re: seats...bolt right up. me too __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

03-22-2006, 09:00 PM	#12
MisterMan Account Suspended Join Date: Jan 2006 Location: Visalia, California Posts: 286	Re: seats...bolt right up. pics!!!!!!! (see above!!!)

03-22-2006, 09:33 PM	#13
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: seats...bolt right up. Misterman - sounds very interesting. I am not looking for a date but how big are you? Short - tall - thin - husky? Seems that they might be the answer for me but I am somewhat short and overly husky. Would they work? Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-22-2006, 09:46 PM	#14
ClemsonChevy 8 vehicles only 4 that run Join Date: Feb 2006 Location: Clemson, SC Posts: 236	Re: seats...bolt right up. Looks like fold down armrests as well! Sweet! I like em! Now you need to find a console to fit between em and hold cold drinks! __________________ 95 2500 350 w/ 3.73 72 GMC 1500 SWB stepside 65 Chevy C10 SWB stepside 72 Chevy C10 LWB fleetside

03-23-2006, 11:34 AM	#16
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: seats...bolt right up. Looks good. My ONLY suggestion would be to swap the sides back. I get why you did it, but that way you could have factory truck arm rests on the doors, and seat arm rests for your other arm in the middle. Subwoofers....plus....softdrink in cupholder....equals.....FIZZY DRINK! Nothing like a bouncing Dr. Pepper to get you going! Looks good though. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 03-23-2006 at 11:36 AM.

03-23-2006, 03:24 PM	#18
moneyguru Registered User Join Date: Oct 2002 Location: kalamazoo, mi Posts: 397	Re: seats...bolt right up. Looks like 3 of your pis are sideways, but that's easy to fix! Log into your photobucket account and click edit on the pic that is currently displayed sideways. A enw page will open up with a thumbnail of your pic and at the bottom of the page there is the option to rotate the pic clockwise 90, 180 or 270 degrees. Seats look good though, and the price was definitely right! __________________ "Do the things you fear to do and the death of fear is certain"

03-23-2006, 03:41 PM	#19
Mechdawg Registered User Join Date: Jul 2002 Location: Dover AFB Delaware Posts: 159	Re: seats...bolt right up. I dont have any pics but I did pick up a couple of front buckets from a 91 or 92 honda civic they fit pretty nice had to bolt them up to some L brackets up front and a spacer in the rear new holes also needed. All very easy to do and with the head rest pulled out they sit below the window line. They ended up looking pretty nice sadly I sold that truck and didnt get any pics.

03-23-2006, 10:16 PM	#20
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: seats...bolt right up. Those look like they fit pretty good... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.