72 GMC 3/4T 4X4 Parting-WA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 03-22-2006, 04:20 PM

350 engine: Runs exc, new QJET/HEI/wires etc = $500
TH 350 trans: works good = $250
205 TC w/shifter & linkage = $350
350/205 adaptor = $200 (Not sold separately until/unless other is gone)
ALL: TH350 & 205 & adaptor = $700 complete
Dana 60 rear & Dana 44 front (DB) = $600 pr

Sorry---This is a local/U-pull it sale offering only!

Normally this thread would be useless without pics...but, this truck is so ugly, I don't want to scare anyone. Driven on the farm regularly! Very good mechanics...Very bad appearance.

dave666693 · 03-22-2006, 04:28 PM

Hi Frank. What gears is the rear end? Posi? Leaf or spring?

jcfoote60 · 03-22-2006, 09:41 PM

I am looking for GMC parklamp buckets that go on the grill. I have new lenses but they still don't make repop's yet on the buckets. If you have them, how much and what would shipping be to Idaho (83617)? Also are the eyebrow moldings around the grill in any kind of shape??

**PICKMUP** · 03-22-2006, 11:11 PM

Dave: This is a 4X4 so it is leaf. No posi. Probably 4:10 but have not picked the truck up yet.

JC: I will check the eyebrows, but don't hold out any hope. Rough truck. I should have your GMC park housings in my used inventory...$20 pr and $10 to box & ship.

NOTE: The bottom/big section of the grill looked real nice.

Livrat · 03-23-2006, 12:18 AM

Starting to dabble in the 4X4's ??? ...

your addiction gets deeper... TTT for ya

HeavyK20 · 03-23-2006, 08:39 AM

Any frame parts that are salvageable? I'm looking for rear spring hangers and the cross member that mounts between the forward spring hagers on the rear axle.

**4X4GMC1972** · 03-23-2006, 01:20 PM

If it has it, I can use a heat stove, tube, and long dipstick with tube. That is if you are willing to seperate from the engine.
Thanks

**PICKMUP** · 03-23-2006, 11:29 PM

JC: The eyebrows are real nice! I will send you both the eyebrows and the Park light housings for $60.

No engine parts...

No frame parts...Check with Livrat, sounds like he has one down to the frame.

**67sss** · 03-24-2006, 01:03 AM

Frank, got the stuff today, Thanks. I need the gear indicator mount for the sterring column for a 72, I have the plastic lens. pic below. I can add it the $ if you don't mind and you have one.

**PICKMUP** · 03-24-2006, 01:10 PM

67sss: I will check and let you know.

Diffs are 4:10.

That's a pretty nice grill. Straight. Lower section has good chrome. Top bar is straight but rusty---good for rechrome...$200 + shipping.

Doors and blue dlx door panels are good.

I drove it and it runs good, shifts good, 205 shifts into all positions smoothly and all driveshafts are there and hooked up.

It is still ugly!!!

72Bob · 03-25-2006, 01:23 AM

If I brought the beer and the funny stories, and watched you pull the 350 engine, would it still cost me $500 bucks?

HeavyK20 · 03-25-2006, 08:04 AM

I am interested in the frame. Can you post some pics once the tin is off?

**PICKMUP** · 03-25-2006, 12:26 PM

hvyK: The body is not coming off the frame...But, if someone buys the pair of diffs for $600, they can have the frame with title & cab/vin tag.

Bob: The beer sounds good, but me pulling anything doesn't.

CG · 03-25-2006, 01:50 PM

how much for all the running gear. frame, front and rear diffs, motor, tranny and trans...and i suppose the body parts you dont want to take off. i have a buddy that is looking for 4x4 running chassis complete.

**PICKMUP** · 03-25-2006, 02:43 PM

CG:
Running/driving truck, less grill,core support & doors...$1,600

**PICKMUP** · 03-25-2006, 03:35 PM

...and here's a nice straight pair of 4X4 front bumper brackets that fit all GMCs and 67-70 Chevys...$70 shipped

CG · 03-25-2006, 08:55 PM

Quote:

Originally Posted by PICKMUP

CG:
Running/driving truck, less grill,cs & doors...$1,600

ok thanks frank,i will pass the info on to him....gonna smack myself for this but what is cs?

**PICKMUP** · 03-25-2006, 10:41 PM

I just rolled around under the truck with a light and the frame looks great! I do not see any rust/pitting and no cracks around the steering box. The 205 TC looks exceptionally clean and nice. Again, no rust.
The hubs, with blue spicer locks, lock & unlock smoothly.
It looks like factory over load springs on the rearend.
Engine does runs nice...no smoke...no misses.
...and it is still ugly!!!

03-22-2006, 04:20 PM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,127	72 GMC 3/4T 4X4 Parting-WA 350 engine: Runs exc, new QJET/HEI/wires etc = $500 TH 350 trans: works good = $250 205 TC w/shifter & linkage = $350 350/205 adaptor = $200 (Not sold separately until/unless other is gone) ALL: TH350 & 205 & adaptor = $700 complete Dana 60 rear & Dana 44 front (DB) = $600 pr Sorry---This is a local/U-pull it sale offering only! Normally this thread would be useless without pics...but, this truck is so ugly, I don't want to scare anyone. Driven on the farm regularly! Very good mechanics...Very bad appearance.

03-22-2006, 04:28 PM	#2
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: 72 GMC 3/4T 4X4 Parting-WA Hi Frank. What gears is the rear end? Posi? Leaf or spring?

03-22-2006, 09:41 PM	#3
jcfoote60 Active Member Join Date: Jun 2005 Location: Idaho Posts: 263	Re: 72 GMC 3/4T 4X4 Parting-WA I am looking for GMC parklamp buckets that go on the grill. I have new lenses but they still don't make repop's yet on the buckets. If you have them, how much and what would shipping be to Idaho (83617)? Also are the eyebrow moldings around the grill in any kind of shape??

03-22-2006, 11:11 PM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,127	Re: 72 GMC 3/4T 4X4 Parting-WA Dave: This is a 4X4 so it is leaf. No posi. Probably 4:10 but have not picked the truck up yet. JC: I will check the eyebrows, but don't hold out any hope. Rough truck. I should have your GMC park housings in my used inventory...$20 pr and $10 to box & ship. NOTE: The bottom/big section of the grill looked real nice.

03-23-2006, 12:18 AM	#5
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 72 GMC 3/4T 4X4 Parting-WA Starting to dabble in the 4X4's ??? ... your addiction gets deeper... TTT for ya

03-23-2006, 08:39 AM	#6
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	Re: 72 GMC 3/4T 4X4 Parting-WA Any frame parts that are salvageable? I'm looking for rear spring hangers and the cross member that mounts between the forward spring hagers on the rear axle. __________________ Eric 1969 K20, 465/205 package

03-23-2006, 01:20 PM	#7
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: 72 GMC 3/4T 4X4 Parting-WA If it has it, I can use a heat stove, tube, and long dipstick with tube. That is if you are willing to seperate from the engine. Thanks __________________ 1978 Dodge Omni

03-23-2006, 11:29 PM	#8
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,127	Re: 72 GMC 3/4T 4X4 Parting-WA JC: The eyebrows are real nice! I will send you both the eyebrows and the Park light housings for $60. No engine parts... No frame parts...Check with Livrat, sounds like he has one down to the frame.

03-24-2006, 01:03 AM	#9
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	Re: 72 GMC 3/4T 4X4 Parting-WA Frank, got the stuff today, Thanks. I need the gear indicator mount for the sterring column for a 72, I have the plastic lens. pic below. I can add it the $ if you don't mind and you have one. Attached Images

03-24-2006, 01:10 PM	#10
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,127	Re: 72 GMC 3/4T 4X4 Parting-WA 67sss: I will check and let you know. Diffs are 4:10. That's a pretty nice grill. Straight. Lower section has good chrome. Top bar is straight but rusty---good for rechrome...$200 + shipping. Doors and blue dlx door panels are good. I drove it and it runs good, shifts good, 205 shifts into all positions smoothly and all driveshafts are there and hooked up. It is still ugly!!! Attached Images Last edited by PICKMUP; 03-25-2006 at 01:30 AM.

03-25-2006, 01:23 AM	#11
72Bob Registered User Join Date: Sep 2002 Location: Burlington, WA Posts: 298	Re: 72 GMC 3/4T 4X4 Parting-WA If I brought the beer and the funny stories, and watched you pull the 350 engine, would it still cost me $500 bucks? __________________ 1971 GMC Sierra 3/4 Ton 4x4 1972 Chevrolet SWB 4x4 RIP LeRoy

03-25-2006, 08:04 AM	#12
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	Re: 72 GMC 3/4T 4X4 Parting-WA I am interested in the frame. Can you post some pics once the tin is off? __________________ Eric 1969 K20, 465/205 package

03-25-2006, 12:26 PM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,127	Re: 72 GMC 3/4T 4X4 Parting-WA hvyK: The body is not coming off the frame...But, if someone buys the pair of diffs for $600, they can have the frame with title & cab/vin tag. Bob: The beer sounds good, but me pulling anything doesn't.

03-25-2006, 01:50 PM	#14
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,846	Re: 72 GMC 3/4T 4X4 Parting-WA how much for all the running gear. frame, front and rear diffs, motor, tranny and trans...and i suppose the body parts you dont want to take off. i have a buddy that is looking for 4x4 running chassis complete.

03-25-2006, 02:43 PM	#15
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,127	Re: 72 GMC 3/4T 4X4 Parting-WA CG: Running/driving truck, less grill,core support & doors...$1,600 Last edited by PICKMUP; 03-25-2006 at 10:28 PM.



Register or Log In To remove these advertisements.

03-25-2006, 03:35 PM	#16
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,127	Re: 72 GMC 3/4T 4X4 Parting-WA ...and here's a nice straight pair of 4X4 front bumper brackets that fit all GMCs and 67-70 Chevys...$70 shipped Attached Images Last edited by PICKMUP; 03-25-2006 at 03:36 PM.

03-25-2006, 10:41 PM	#18
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,127	Re: 72 GMC 3/4T 4X4 Parting-WA I just rolled around under the truck with a light and the frame looks great! I do not see any rust/pitting and no cracks around the steering box. The 205 TC looks exceptionally clean and nice. Again, no rust. The hubs, with blue spicer locks, lock & unlock smoothly. It looks like factory over load springs on the rearend. Engine does runs nice...no smoke...no misses. ...and it is still ugly!!!

Register or Log In To remove these advertisements.