M-21 BBC setup - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hambone1958 · 03-27-2006, 10:03 AM

I have an M-21 4-speed with bellhousing,flywheel,clutch,pressure plate,hurst comp+ shifter. Everything you need for a BBC. I bought this tranny as part of an engine tranny package. It came out of a 1970 Chevelle SS it was not a #'s matching car and I know the engine is a 396 out of a 1969 and it is in the Jumpin Jimmy the tranny I don't know. There are several pics at the jummin jimmy link below. I also have a set of hooker headers for BBC in a 70 chevelle. Please note the bellhousing does have a small hole in it. Asking $1200.00 For everything. Would perfer local pickup.

**ScottH** · 03-27-2006, 11:02 AM

Can you tell me what size clutch & flywheel you have?

Thanks.

hambone1958 · 03-27-2006, 11:04 AM

11" clutch and 14" flywheel.

**ScottH** · 03-27-2006, 03:47 PM

Thanks - TTT for ya

hambone1958 · 03-28-2006, 05:40 PM

Is there no interest or is it priced to high?

**special-K** · 03-28-2006, 11:24 PM

Honestly,since you asked,I think the price is high.Without knowing the condition/mileage of the clutch or overall condition It`s hard to say.But,I would expect to pay about 1/2 of what you`re asking unless I knew the parts had nomiles and the trans was recently gone over,repaired or rebuilt.

AKChevyman · 03-29-2006, 08:48 AM

how much do you want for the headers?

**Ron 586** · 03-29-2006, 09:23 AM

Quote:

Originally Posted by hambone1958

Is there no interest or is it priced to high?

I've got the same setup that I've had for 23 years. The best offer i ever got on it was $500 and it had new parts. (Used 4 months in daily driver) Could sell it for $300 every day. Still taking up space on the shelf.

**Tim Christian** · 03-29-2006, 11:33 PM

I would go $600.00 on either set up if interested? Hambone or Ron

**Ron 586** · 03-30-2006, 01:21 AM

Quote:

Originally Posted by Tim Christian

I would go $600.00 on either set up if interested? Ham bone or Ron

Last week you would have owned it. After having it all this time I was ready to give up. Monday I bought a project 67 truck and it will have the 4 speed in it. If my plan changes I'll get back to you. Thanks.

**special-K** · 03-30-2006, 08:33 AM

I`m in the market,too.

Jim_PA · 03-30-2006, 10:44 AM

Quote:

Originally Posted by hambone1958

Is there no interest or is it priced to high?

IMO; most people paying 1200 or so for a manual trans will opt for a new Tremmec 5 speed O.D. tranny over 30 year old 4-speeds.

03-27-2006, 10:03 AM	#1
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	M-21 BBC setup I have an M-21 4-speed with bellhousing,flywheel,clutch,pressure plate,hurst comp+ shifter. Everything you need for a BBC. I bought this tranny as part of an engine tranny package. It came out of a 1970 Chevelle SS it was not a #'s matching car and I know the engine is a 396 out of a 1969 and it is in the Jumpin Jimmy the tranny I don't know. There are several pics at the jummin jimmy link below. I also have a set of hooker headers for BBC in a 70 chevelle. Please note the bellhousing does have a small hole in it. Asking $1200.00 For everything. Would perfer local pickup. __________________ Alan

03-27-2006, 11:02 AM	#2
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: M-21 BBC setup Can you tell me what size clutch & flywheel you have? Thanks.

03-27-2006, 11:04 AM	#3
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	Re: M-21 BBC setup 11" clutch and 14" flywheel. __________________ Alan

03-27-2006, 03:47 PM	#4
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: M-21 BBC setup Thanks - TTT for ya

03-28-2006, 05:40 PM	#5
hambone1958 Registered User Join Date: Feb 2003 Location: Point Harbor NC Posts: 299	Re: M-21 BBC setup Is there no interest or is it priced to high? __________________ Alan

03-28-2006, 11:24 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: M-21 BBC setup Honestly,since you asked,I think the price is high.Without knowing the condition/mileage of the clutch or overall condition It`s hard to say.But,I would expect to pay about 1/2 of what you`re asking unless I knew the parts had nomiles and the trans was recently gone over,repaired or rebuilt. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-29-2006, 08:48 AM	#7
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Re: M-21 BBC setup how much do you want for the headers? __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored.

03-29-2006, 11:33 PM	#9
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: M-21 BBC setup I would go $600.00 on either set up if interested? Hambone or Ron

03-30-2006, 08:33 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: M-21 BBC setup I`m in the market,too. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.