Tomorrow is the day of truth! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 04-08-2006, 10:47 PM

Guess what showed up in the mail today!!

My TPI Chip!!

I got the old prom unsoldered and pulled out, and installed the new prom I've had ready and waiting for several months now

Tommorow I need to install my distributer, run my plug wires, run a wire from the cab to the fuel pump, put the chip in, and hit the key!

Lets hope she runs tommorow!

If not, anyone want to buy a tuned port setup? Its got a 1992 Corvette speed density setup on it, with a converted 1985 Camaro Intake

Lets just hope it runs!!

sixty8c10 · 04-09-2006, 06:58 AM

good luck

**Palf70Step** · 04-09-2006, 09:50 AM

Hey, It is tomorrow, early yes....but.....where is the tire burning action Russell?

bluex · 04-09-2006, 01:13 PM

Good luck man! I hope its running by now.

79BIG10 · 04-09-2006, 01:31 PM

You're probably out doing donuts in it

Hope everything worked out.

Russell · 04-09-2006, 03:36 PM

Not quite yet -- Just got home from church

Gonna eat some dinner, then I'm off to go see if she'll run

82c10 · 04-09-2006, 05:53 PM

it's been 2 hours- does she run yet?

Mike76251 · 04-09-2006, 06:15 PM

Drum roll please...............

Well????

Russell · 04-09-2006, 08:39 PM

Well, its lookin like the TPI is for sale

haha, actually, I don't think I'll sell it, but I've got a very weird bug with the chip, and the truck goes straight to limp mode.

Does run in limp mode though (however very crappily!)

Even hearing it run in limp mode is good enough to motivate me -- I'm hoping to figure my prom error out tonight, and get the truck running properly tommorow. If thats the case, expect videos soon

**Palf70Step** · 04-09-2006, 08:45 PM

Good luck Russell.

Be looking forward to seeing the final merging of all those parts and trucks into the one.

Russell · 04-09-2006, 09:12 PM

Well, I just tried burning a totally stock prom less VATS disabled, and the fuel injector constant set to what I've got for injectors, and the truck doesn't go into limp mode anymore!

Woohoo!

Still doesn't run though :P Thats a combination of a few things though -- Timing is way out, minimum air is likely way out of whack, and I'm almost willing to be a dollar that my fuel pressure is too low.

So, gonna go work on the timing a bit, and see if I can't get it to chug a little bit better, and try to set minimum air a bit. Fuel pressure will have to wait till tommorow when I can figure out how to get my gauge installed.

I think she's gonna run this time guys

**Palf70Step** · 04-09-2006, 09:35 PM

Russell · 04-09-2006, 09:55 PM

http://www.zieglerdigital.ca/public/...s/MOV00010.MPG

Here she is guys!

This is without me setting the timing, minimum air, and with no 02 sensor, and a few known vac leaks

I gotta get some accessories on the front before I let it run too much, cause I don't have my waterpump running here.

71swb4x4 · 04-09-2006, 09:56 PM

You're going to have to run a cowl hood to clear the battery

**Palf70Step** · 04-09-2006, 09:59 PM

Love the battery position Russell.

It's getting there.

Pretty soon she'll be

Russell · 04-09-2006, 10:43 PM

Well sorrrry I don't have some fancy battery tray for my truck!

I gotta get new battery cables, then re-locate them to the pass side from the driver's side

cliffsta · 04-09-2006, 11:24 PM

There goes my hero...

Congrats on the progress, you'll be pwning the entire nation of Canada before much longer.

Great stuff mate.

Russell · 04-09-2006, 11:36 PM

You just wait until I get my new engine done

This one runs, but won't be more than maybe 200 hp with the stock heads.... The new one will be over 300 HP

79BIG10 · 04-10-2006, 12:39 AM

Glad to see you get it running.

Wanna send some of that good luck my way so I can get the blazer running as well

SanitysBane · 04-12-2006, 12:00 AM

Well its about time Russell. Congrats man, Im still pulling apart my truck.

84 400 · 04-12-2006, 12:09 AM

nice work russ keep on trucking !

04-08-2006, 10:47 PM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Tomorrow is the day of truth! Guess what showed up in the mail today!! My TPI Chip!! I got the old prom unsoldered and pulled out, and installed the new prom I've had ready and waiting for several months now Tommorow I need to install my distributer, run my plug wires, run a wire from the cab to the fuel pump, put the chip in, and hit the key! Lets hope she runs tommorow! If not, anyone want to buy a tuned port setup? Its got a 1992 Corvette speed density setup on it, with a converted 1985 Camaro Intake Lets just hope it runs!! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-09-2006, 06:58 AM	#2
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	Re: Tommorow is the day of truth! good luck __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

04-09-2006, 09:50 AM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,844	Re: Tommorow is the day of truth! Hey, It is tomorrow, early yes....but.....where is the tire burning action Russell? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 04-09-2006 at 09:50 AM.

04-09-2006, 01:13 PM	#4
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Re: Tommorow is the day of truth! Good luck man! I hope its running by now. __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

04-09-2006, 01:31 PM	#5
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Re: Tommorow is the day of truth! You're probably out doing donuts in it Hope everything worked out. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-09-2006, 03:36 PM	#6
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Tommorow is the day of truth! Not quite yet -- Just got home from church Gonna eat some dinner, then I'm off to go see if she'll run __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-09-2006, 05:53 PM	#7
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	Re: Tommorow is the day of truth! it's been 2 hours- does she run yet? __________________ *SWB Stands for Short Wide Bed*

04-09-2006, 06:15 PM	#8
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,500	Re: Tommorow is the day of truth! Drum roll please............... Well????

04-09-2006, 08:39 PM	#9
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Tommorow is the day of truth! Well, its lookin like the TPI is for sale haha, actually, I don't think I'll sell it, but I've got a very weird bug with the chip, and the truck goes straight to limp mode. Does run in limp mode though (however very crappily!) Even hearing it run in limp mode is good enough to motivate me -- I'm hoping to figure my prom error out tonight, and get the truck running properly tommorow. If thats the case, expect videos soon __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-09-2006, 08:45 PM	#10
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,844	Re: Tommorow is the day of truth! Good luck Russell. Be looking forward to seeing the final merging of all those parts and trucks into the one. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-09-2006, 09:12 PM	#11
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Tommorow is the day of truth! Well, I just tried burning a totally stock prom less VATS disabled, and the fuel injector constant set to what I've got for injectors, and the truck doesn't go into limp mode anymore! Woohoo! Still doesn't run though :P Thats a combination of a few things though -- Timing is way out, minimum air is likely way out of whack, and I'm almost willing to be a dollar that my fuel pressure is too low. So, gonna go work on the timing a bit, and see if I can't get it to chug a little bit better, and try to set minimum air a bit. Fuel pressure will have to wait till tommorow when I can figure out how to get my gauge installed. I think she's gonna run this time guys __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 04-09-2006 at 09:13 PM.

04-09-2006, 09:35 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,844	Re: Tommorow is the day of truth! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-09-2006, 09:55 PM	#13
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Tommorow is the day of truth! http://www.zieglerdigital.ca/public/...s/MOV00010.MPG Here she is guys! This is without me setting the timing, minimum air, and with no 02 sensor, and a few known vac leaks I gotta get some accessories on the front before I let it run too much, cause I don't have my waterpump running here. __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-09-2006, 09:56 PM	#14
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Tommorow is the day of truth! You're going to have to run a cowl hood to clear the battery __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

04-09-2006, 09:59 PM	#15
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,844	Re: Tommorow is the day of truth! Love the battery position Russell. It's getting there. Pretty soon she'll be __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

04-09-2006, 10:43 PM	#16
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Tommorow is the day of truth! Well sorrrry I don't have some fancy battery tray for my truck! I gotta get new battery cables, then re-locate them to the pass side from the driver's side __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-09-2006, 11:24 PM	#17
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	Re: Tommorow is the day of truth! There goes my hero... Congrats on the progress, you'll be pwning the entire nation of Canada before much longer. Great stuff mate. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

04-09-2006, 11:36 PM	#18
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Tommorow is the day of truth! You just wait until I get my new engine done This one runs, but won't be more than maybe 200 hp with the stock heads.... The new one will be over 300 HP __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 04-09-2006 at 11:36 PM.

04-10-2006, 12:39 AM	#19
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Re: Tommorow is the day of truth! Glad to see you get it running. Wanna send some of that good luck my way so I can get the blazer running as well __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-12-2006, 12:00 AM	#20
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	Re: Tomorrow is the day of truth! Well its about time Russell. Congrats man, Im still pulling apart my truck. __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

04-12-2006, 12:09 AM	#21
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,741	Re: Tomorrow is the day of truth! nice work russ keep on trucking ! __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

Register or Log In To remove these advertisements.