Roll bar positioning - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RunTMCfan · 04-13-2006, 05:42 PM

My rollbar versus others appears to be set back too far. From the top of the back of my stock seats I would guess the roll bar is almost a foot away. In looking at photos of your guys Blazers it appears that most roll bars are just inches behing the front seats.

70rs/ss · 04-13-2006, 06:16 PM

Stock they fit behind the seat and mount in front of wheel tubs, but a lot of aftermarket, custom and home built ones out there that mount differently, post picts and maybe someone can tell you exactly what you have?

LUV2XCLR8 · 04-13-2006, 06:18 PM

Quote:

Originally Posted by 70rs/ss

post picts and maybe someone can tell you exactly what you have?

**Gary 70 Jimmy** · 04-14-2006, 11:54 AM

I bolted mine down right behind the carpet strip.

RunTMCfan · 04-14-2006, 12:48 PM

I'll do that.

**Gary 70 Jimmy** · 04-14-2006, 02:01 PM

Dont go by my front seat its not bolted in. If your pass seat belt is bolted to the back floor you will have to relocate it.

bouncytruck · 04-14-2006, 03:02 PM

Set it in place before you bolt it down. Ya don't want to hit your head on it.

04-13-2006, 05:42 PM	#1
RunTMCfan Registered User Join Date: Oct 2005 Location: San Diego, Ca Posts: 251	Roll bar positioning My rollbar versus others appears to be set back too far. From the top of the back of my stock seats I would guess the roll bar is almost a foot away. In looking at photos of your guys Blazers it appears that most roll bars are just inches behing the front seats. __________________ Rob "RunTMCfan"

04-13-2006, 06:16 PM	#2
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Roll bar positioning Stock they fit behind the seat and mount in front of wheel tubs, but a lot of aftermarket, custom and home built ones out there that mount differently, post picts and maybe someone can tell you exactly what you have? Last edited by 70rs/ss; 04-13-2006 at 06:16 PM.

04-14-2006, 11:54 AM	#4
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Roll bar positioning I bolted mine down right behind the carpet strip. Last edited by Gary 70 Jimmy; 10-24-2008 at 09:14 AM.

04-14-2006, 12:48 PM	#5
RunTMCfan Registered User Join Date: Oct 2005 Location: San Diego, Ca Posts: 251	Re: Roll bar positioning I'll do that. __________________ Rob "RunTMCfan"

04-14-2006, 02:01 PM	#6
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Roll bar positioning Dont go by my front seat its not bolted in. If your pass seat belt is bolted to the back floor you will have to relocate it.

04-14-2006, 03:02 PM	#7
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Roll bar positioning Set it in place before you bolt it down. Ya don't want to hit your head on it. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.