c50 doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jamie72** · 04-15-2006, 07:41 PM

any interest in a set of 67-72 c50 doors?? these are in real nice shape and complete.

sakohntr · 04-15-2006, 08:02 PM

How about front fenders???

Longhorn Man · 04-15-2006, 08:25 PM

jamie, is the front lower corner notched? I know some had this and others did not.

**jamie72** · 04-15-2006, 09:30 PM

yes these have the corners notched, thought all the big trucks of that era were that way..hummmm
sorry bruce these are all i got, but i might be able to find a couple??

Longhorn Man · 04-15-2006, 10:22 PM

I remember seeing one in the junk yard here that did not have the cut out.
K, I'm out on the doors. Bummer, they are probably pretty much rust free too huh?

chevy_fatman · 04-15-2006, 10:44 PM

C'mon Andy, I'm sure you can get that notch welded up and have some doors.

jc · 04-15-2006, 11:01 PM

WASNT SOME ONE ON HERE DESPERATLY Looking for c50 body parts for a while now

**jamie72** · 04-15-2006, 11:08 PM

yea there pretty much rust free, the driver needs a little work on the bottom, the passenger is real good shape. i don`t know too much about the big trucks i only check them out in the yards also, did see a crewcab c50 in one yard.
id sell these 100.00 for the pair,or trade them for something

Longhorn Man · 04-15-2006, 11:23 PM

Paul... you've obviously never seen my welding. Imagine laying the doors on there sides, and dumping LIQUID SLAG all over them.... yeah, that's me on a good day with a welder.

Besides, if I could weld, I'd have nice doors already.

vtblazer · 04-16-2006, 06:05 PM

jamie, are you willing to ship?

Shipping would be to 05663 or I could give you a business addy if that's cheaper/easier.

What are you looking for as a trade?

Any pics?

PM sent.

biglou55 · 04-16-2006, 06:49 PM

I was the one looking for C40-C50 C60 front fenders but for a 60-66 and unfortunatly I am still looking ( come on guys help a fellow truck nut out. )

72freak · 04-16-2006, 08:12 PM

I too am searching for the meduim duty front fenders. Rust free and as dent free as possible. There are however 2 types for these trucks. There are the ones that flare out about 7 inches and the ones that flare about 4 inches. Most of the ones for school busses flared the 7 inches. I need the ones that flare out the 4 inches. Mypaint job is on hold until I find some fenders.

chevy_fatman · 04-16-2006, 10:48 PM

Quote:

Originally Posted by jamie72

did see a crewcab c50 in one yard.

Something like this?

72freak · 04-17-2006, 03:58 PM

Quote:

Originally Posted by chevy_fatman

Something like this?

I must have it!!!!!!! What a jem!!!! Where is it...I would love to see it!!

**jamie72** · 04-17-2006, 04:14 PM

yep just like that, think it was a logging truck,so does anyone want these doors??? lol

vtblazer · 04-17-2006, 05:48 PM

Quote:

Originally Posted by jamie72

so does anyone want these doors?

I'm going to pass jamie, turns out what I really need is a set of those huge fenders.

Thanks for the pics and your willingness/offer to help with shipping.

**jamie72** · 04-17-2006, 06:50 PM

no prolbem vt, good luck on your prodject..

69TowRig · 04-18-2006, 10:10 PM

I know where two complete C50s are in eastern NC near Plymouth. I don't think either is for sale though. Saw them the other day.

04-15-2006, 07:41 PM	#1
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	c50 doors any interest in a set of 67-72 c50 doors?? these are in real nice shape and complete. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-15-2006, 08:02 PM	#2
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: c50 doors How about front fenders??? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

04-15-2006, 08:25 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: c50 doors jamie, is the front lower corner notched? I know some had this and others did not.

04-15-2006, 09:30 PM	#4
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: c50 doors yes these have the corners notched, thought all the big trucks of that era were that way..hummmm sorry bruce these are all i got, but i might be able to find a couple?? __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-15-2006, 10:22 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: c50 doors I remember seeing one in the junk yard here that did not have the cut out. K, I'm out on the doors. Bummer, they are probably pretty much rust free too huh?

04-15-2006, 10:44 PM	#6
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Re: c50 doors C'mon Andy, I'm sure you can get that notch welded up and have some doors. __________________ Paul How do you make the invisible, visible?.........You take it away.

04-15-2006, 11:01 PM	#7
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: c50 doors WASNT SOME ONE ON HERE DESPERATLY Looking for c50 body parts for a while now __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

04-15-2006, 11:08 PM	#8
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: c50 doors yea there pretty much rust free, the driver needs a little work on the bottom, the passenger is real good shape. i don`t know too much about the big trucks i only check them out in the yards also, did see a crewcab c50 in one yard. id sell these 100.00 for the pair,or trade them for something __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-15-2006, 11:23 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: c50 doors Paul... you've obviously never seen my welding. Imagine laying the doors on there sides, and dumping LIQUID SLAG all over them.... yeah, that's me on a good day with a welder. Besides, if I could weld, I'd have nice doors already.

04-16-2006, 06:05 PM	#10
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: c50 doors jamie, are you willing to ship? Shipping would be to 05663 or I could give you a business addy if that's cheaper/easier. What are you looking for as a trade? Any pics? PM sent. Last edited by vtblazer; 04-16-2006 at 06:08 PM.

04-16-2006, 06:49 PM	#11
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	Re: c50 doors I was the one looking for C40-C50 C60 front fenders but for a 60-66 and unfortunatly I am still looking ( come on guys help a fellow truck nut out. ) __________________ Certifiably crazy person Last edited by biglou55; 04-16-2006 at 06:51 PM.

04-16-2006, 08:12 PM	#12
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: c50 doors I too am searching for the meduim duty front fenders. Rust free and as dent free as possible. There are however 2 types for these trucks. There are the ones that flare out about 7 inches and the ones that flare about 4 inches. Most of the ones for school busses flared the 7 inches. I need the ones that flare out the 4 inches. Mypaint job is on hold until I find some fenders. Attached Images

04-17-2006, 04:14 PM	#15
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: c50 doors yep just like that, think it was a logging truck,so does anyone want these doors??? lol __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-17-2006, 06:50 PM	#17
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: c50 doors no prolbem vt, good luck on your prodject.. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-18-2006, 10:10 PM	#18
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: c50 doors I know where two complete C50s are in eastern NC near Plymouth. I don't think either is for sale though. Saw them the other day. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.