K20 frame- 4spd/Rockwell221 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

da-burb · 04-16-2006, 11:06 PM

SOLD--- 1969 K20 frame, V-8 crossmember, no title, no axles, and not a rusted out Minnesota frame, $100

SOLD---From the same truck, Rockwell T-221 and 4spd transmission, $100

SOLD---front driveshaft,

SCRAPPED---rear 2pc driveshaft, $25

*bisquik65* · 04-17-2006, 10:10 PM

How much for the front driveshaft shipped to 28705 thank you,Erick

HeavyK20 · 04-17-2006, 10:41 PM

PM sent.

da-burb · 04-17-2006, 11:53 PM

some pictures of the frame.

da-burb · 04-17-2006, 11:58 PM

The T-221 transfer case.

da-burb · 04-18-2006, 12:10 AM

SOLD---Drive shaft skid plate and crossmember $25 +ship

HARD TO BELIEVE, But this is still AVAILABLE!!!---Well built wooden flatbed. 6x8 green treated lumber and 2x6 green treated deck. No shipping on this. If you have a use for this and you are local or in the area I will help load and it will cost you only a couple packages of Grain Belt Premium.

red71cheyenne · 04-18-2006, 01:20 PM

Burb, could you measure the front driveshaft and tell me what it is fully closed and fully extended? I got to get mine shortened. I'd be intersted in the torsion mount for the xfer case if no one else takes it as well. Thanks, Jeff.

*bisquik65* · 04-18-2006, 02:12 PM

I am 1st in line on the front shaft,thank you

red71cheyenne · 04-18-2006, 03:27 PM

I don't want the shaft. I asked him to measure it for me.

da-burb · 04-21-2006, 11:29 PM

ttt...I will take measurements for you tomorrow red71
Bisquick $30 + ship

*bisquik65* · 04-22-2006, 04:35 PM

Quote:

Originally Posted by da-burb

ttt...I will take measurements for you tomorrow red71
Bisquick $30 + ship

Da-Burb i will take the front shaft,PM sent with info,Thanks,Erick

da-burb · 04-22-2006, 06:54 PM

red71cheyenne: compressed it is 24-1/2", extended it is 27". Hope that helps you out.

red71cheyenne · 04-23-2006, 11:29 AM

Thanks Burb, that does. Appreciate the pics! Let me know if no one wants that torque mount for the xfer case. Still need one for mine. Later, Jeff.

**Bernie** · 05-14-2006, 11:20 AM

Burb, Do you still have the 4 speed and the Rockwell for sale ? Is the 4 speed an SM 465 ?

JAKES 68GMC · 05-14-2006, 07:07 PM

Bernie it is a SM465. Wish I was closer, I'd had that Rockwell by now.

da-burb · 05-14-2006, 10:13 PM

Bernie I do have it. The frame, front drive shaft, and skid plate are sold.

da-burb · 05-16-2006, 07:41 AM

Everything but the flat bed patio is gone, Thanks everybody!

04-16-2006, 11:06 PM	#1
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	K20 frame- 4spd/Rockwell221 SOLD--- 1969 K20 frame, V-8 crossmember, no title, no axles, and not a rusted out Minnesota frame, $100 SOLD---From the same truck, Rockwell T-221 and 4spd transmission, $100 SOLD---front driveshaft, SCRAPPED---rear 2pc driveshaft, $25 __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 Last edited by da-burb; 05-16-2006 at 07:39 AM.

04-17-2006, 10:10 PM	#2
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: K20 frame- 4spd/Rockwell221 How much for the front driveshaft shipped to 28705 thank you,Erick

04-17-2006, 10:41 PM	#3
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	Re: K20 frame- 4spd/Rockwell221 PM sent. __________________ Eric 1969 K20, 465/205 package

04-17-2006, 11:53 PM	#4
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: K20 frame- 4spd/Rockwell221 some pictures of the frame. Attached Images

04-17-2006, 11:58 PM	#5
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: K20 frame- 4spd/Rockwell221 The T-221 transfer case. Attached Images

04-18-2006, 12:10 AM	#6
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: K20 frame- 4spd/Rockwell221 SOLD---Drive shaft skid plate and crossmember $25 +ship HARD TO BELIEVE, But this is still AVAILABLE!!!---Well built wooden flatbed. 6x8 green treated lumber and 2x6 green treated deck. No shipping on this. If you have a use for this and you are local or in the area I will help load and it will cost you only a couple packages of Grain Belt Premium. Attached Images Last edited by da-burb; 05-16-2006 at 07:40 AM.

04-18-2006, 01:20 PM	#7
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: K20 frame- 4spd/Rockwell221 Burb, could you measure the front driveshaft and tell me what it is fully closed and fully extended? I got to get mine shortened. I'd be intersted in the torsion mount for the xfer case if no one else takes it as well. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

04-18-2006, 02:12 PM	#8
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: K20 frame- 4spd/Rockwell221 I am 1st in line on the front shaft,thank you

04-18-2006, 03:27 PM	#9
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: K20 frame- 4spd/Rockwell221 I don't want the shaft. I asked him to measure it for me. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

04-21-2006, 11:29 PM	#10
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: K20 frame- 4spd/Rockwell221 ttt...I will take measurements for you tomorrow red71 Bisquick $30 + ship __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087

04-22-2006, 06:54 PM	#12
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: K20 frame- 4spd/Rockwell221 red71cheyenne: compressed it is 24-1/2", extended it is 27". Hope that helps you out. Attached Images

04-23-2006, 11:29 AM	#13
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: K20 frame- 4spd/Rockwell221 Thanks Burb, that does. Appreciate the pics! Let me know if no one wants that torque mount for the xfer case. Still need one for mine. Later, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty Last edited by red71cheyenne; 04-23-2006 at 11:31 AM.

05-14-2006, 11:20 AM	#14
Bernie Senior Member Join Date: Jan 2001 Location: Northern Illinois Posts: 516	Re: K20 frame- 4spd/Rockwell221 Burb, Do you still have the 4 speed and the Rockwell for sale ? Is the 4 speed an SM 465 ? __________________ Bernie

05-14-2006, 07:07 PM	#15
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,212	Re: K20 frame- 4spd/Rockwell221 Bernie it is a SM465. Wish I was closer, I'd had that Rockwell by now.

05-14-2006, 10:13 PM	#16
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: K20 frame- 4spd/Rockwell221 Bernie I do have it. The frame, front drive shaft, and skid plate are sold. __________________ Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087



Register or Log In To remove these advertisements.

05-16-2006, 07:41 AM	#17
da-burb "Ochre Ogre" Join Date: Apr 2000 Location: Springfield, MN Posts: 3,558	Re: K20 frame- 4spd/Rockwell221 Everything but the flat bed patio is gone, Thanks everybody!

Register or Log In To remove these advertisements.