FS 3/8 Temperature Sensors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

EROC · 04-20-2006, 06:04 AM

I made these mostly for myself and just to see if it would work. I am not a professional machinist, but I think they came out well. I can make some of these and ship them out if anyone is interested. They're just GP Sorensen sensors from Advanced Auto that I cut down from 1/2" to 3/8" pipe thread. Should work for temperature gauges in all 67-72 trucks with original gauges. $25 shipped in the lower 48. Thanks, Eric

**pjmoreland** · 04-20-2006, 10:02 AM

I'd like one please. Do you take PayPal? Thanks!

EROC · 04-20-2006, 02:49 PM

Yes I take Paypal. PMed you. Thanks, Eric

Green Machine · 04-21-2006, 09:57 PM

Eroc - I'll take one too - PM sent.

Just a note to others reading this if your're doing a newer engine swap you may need this since they may be no place screw in the normal sized 1/2 npt sender.

greenhorn male · 04-22-2006, 03:42 AM

Does anyone know where I could get the wire connector that fits the tip of the sending unit. Mine rotted away.

454_72_4X4 · 04-22-2006, 01:51 PM

I have Trick Flow aluminum heads and they have the 3/8 npt holes also. Those senders would be handy if you're using the stock gauges, (I use mechanical Autometer).

Good idea EROC!

Fred T · 04-22-2006, 11:12 PM

Quote:

Originally Posted by greenhorn male

Does anyone know where I could get the wire connector that fits the tip of the sending unit. Mine rotted away.

Try Ron Francis www.wire-works.com

I use a spade terminal and bend things a little so it won't come off.

greenhorn male · 04-23-2006, 01:15 AM

Thanks Fred. Maybe I'll try a spade connector. It'll look a lot better than my alligator clips

**pjmoreland** · 04-23-2006, 01:35 AM

Quote:

Originally Posted by greenhorn male

Does anyone know where I could get the wire connector that fits the tip of the sending unit. Mine rotted away.

I bought one from Ron Francis recently. Here's the link to their online catalog. Scroll about half way down. It's part number TS-10, and you need a BM-8 terminal as well.

http://www.ronfrancis.com/wiringaids.php

Old Yeller 1970 · 04-24-2006, 09:09 AM

EROC I may need one of those. I bought a 3/8 sender from autozone but I'm not convinced it's the correct Ohms to read the temp correctly. I'm getting ready to put in a new radiator and figured I'd Ohm my current sender. Does anyone know what the Ohms are on the original sender?

**pjmoreland** · 04-24-2006, 11:12 AM

Quote:

Originally Posted by Old Yeller 1970

EROC I may need one of those. I bought a 3/8 sender from autozone but I'm not convinced it's the correct Ohms to read the temp correctly. I'm getting ready to put in a new radiator and figured I'd Ohm my current sender. Does anyone know what the Ohms are on the original sender?

It should be about 1000 Ohms when cold.

Green Machine · 04-24-2006, 10:59 PM

I found this cached link on google back to board, not sure if it exists anywhere else - has some ohm test reading and other good info -
or search for ts6641

http://72.14.203.104/search?q=cache:...s&ct=clnk&cd=1

Old Yeller 1970 · 04-24-2006, 11:11 PM

Thanks to both of you for the info. My gut instinct is telling me the sending unit I have ain't right. I sure would hate to ever burn up the engine you see in the sig just because of some kind of coolant failure. It may be a few days before I have a chance to get to it and let everyone know.

Old Yeller 1970 · 05-17-2006, 03:59 PM

I finally got around to checking my sender today and it is definitely not the correct ohms. At room temp it measured 2200 ohms and in a boiling pot of water it was 174. According to pj it should have been 1000 at room temp but in the thread Green Machine posted these were the specs given.
Temp..........Factory (Ohms)
70..............490
180.............130
200.............110

Either way mine won't work. So, EROC if you still have the correct sender I need one for sure. However, I'm completely broke at the moment

so it will be a few days before I can even afford $25 but I will definitely take one when I have the dough.

drink2mny · 05-24-2006, 01:03 PM

Usually hate to bring old threads up..
But we are putting a '96 vortec 350 in a blazer at the shop and need a sending unit for it. so it will work with the early style gauge.

You still have some??

drink2mny · 05-25-2006, 11:52 AM

ya there EROC??

EROC · 05-25-2006, 12:07 PM

I can make a few more. PM sent.

drink2mny · 05-25-2006, 12:12 PM

back at ya..

67stepside · 04-06-2007, 07:42 PM

I PM'd you. I am interested in one of these. Thanks

cwsohm · 01-30-2013, 11:55 PM

If you still have any of the 3/8 NPT temperature sending units, I would love to buy one. New to the forum so not sure how to PM you, but will try to figure it out.
Posted via Mobile Device

nobolt · 01-31-2013, 06:23 AM

**** original poster not active since 2010 ****

HuggerCST · 02-05-2013, 04:53 PM

I'm interested in one too if anyone knows where to get one.

asolde · 02-05-2013, 07:01 PM

I just had one made. I bought the sensor at advance auto parts, then took it into work to our machine shop and had them do a G job for me. Any machine shop should be able to do this for you. Not sure what they would charge though. And I am not sure how accurate the sensor will be now?

HuggerCST · 02-05-2013, 11:40 PM

That's what we are thinking about doing, but as common as the need for this is, it seems like someone would be selling them.

04-20-2006, 06:04 AM	#1
EROC Active Member Join Date: Jan 2005 Location: Salem,Virginia Posts: 123	FS 3/8 Temperature Sensors I made these mostly for myself and just to see if it would work. I am not a professional machinist, but I think they came out well. I can make some of these and ship them out if anyone is interested. They're just GP Sorensen sensors from Advanced Auto that I cut down from 1/2" to 3/8" pipe thread. Should work for temperature gauges in all 67-72 trucks with original gauges. $25 shipped in the lower 48. Thanks, Eric Attached Images __________________ 69 GMC 2500 Camper Special 88 S10 Pickup 04 Impala I ship UPS from 24153

04-20-2006, 10:02 AM	#2
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,981	Re: FS 3/8 Temperature Sensors I'd like one please. Do you take PayPal? Thanks!

04-20-2006, 02:49 PM	#3
EROC Active Member Join Date: Jan 2005 Location: Salem,Virginia Posts: 123	Re: FS 3/8 Temperature Sensors Yes I take Paypal. PMed you. Thanks, Eric __________________ 69 GMC 2500 Camper Special 88 S10 Pickup 04 Impala I ship UPS from 24153

04-21-2006, 09:57 PM	#4
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: FS 3/8 Temperature Sensors Eroc - I'll take one too - PM sent. Just a note to others reading this if your're doing a newer engine swap you may need this since they may be no place screw in the normal sized 1/2 npt sender. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

04-22-2006, 03:42 AM	#5
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Re: FS 3/8 Temperature Sensors Does anyone know where I could get the wire connector that fits the tip of the sending unit. Mine rotted away. __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

04-22-2006, 01:51 PM	#6
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: FS 3/8 Temperature Sensors I have Trick Flow aluminum heads and they have the 3/8 npt holes also. Those senders would be handy if you're using the stock gauges, (I use mechanical Autometer). Good idea EROC! __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

04-23-2006, 01:15 AM	#8
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Re: FS 3/8 Temperature Sensors Thanks Fred. Maybe I'll try a spade connector. It'll look a lot better than my alligator clips __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

04-24-2006, 09:09 AM	#10
Old Yeller 1970 DON'T TREAD ON ME Join Date: May 2005 Location: Crosby County, TX Posts: 989	Re: FS 3/8 Temperature Sensors EROC I may need one of those. I bought a 3/8 sender from autozone but I'm not convinced it's the correct Ohms to read the temp correctly. I'm getting ready to put in a new radiator and figured I'd Ohm my current sender. Does anyone know what the Ohms are on the original sender? __________________ Old Yeller

04-24-2006, 10:59 PM	#12
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: FS 3/8 Temperature Sensors I found this cached link on google back to board, not sure if it exists anywhere else - has some ohm test reading and other good info - or search for ts6641 http://72.14.203.104/search?q=cache:...s&ct=clnk&cd=1 __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0 Last edited by Green Machine; 04-24-2006 at 11:00 PM.

04-24-2006, 11:11 PM	#13
Old Yeller 1970 DON'T TREAD ON ME Join Date: May 2005 Location: Crosby County, TX Posts: 989	Re: FS 3/8 Temperature Sensors Thanks to both of you for the info. My gut instinct is telling me the sending unit I have ain't right. I sure would hate to ever burn up the engine you see in the sig just because of some kind of coolant failure. It may be a few days before I have a chance to get to it and let everyone know. __________________ Old Yeller

05-17-2006, 03:59 PM	#14
Old Yeller 1970 DON'T TREAD ON ME Join Date: May 2005 Location: Crosby County, TX Posts: 989	Re: FS 3/8 Temperature Sensors I finally got around to checking my sender today and it is definitely not the correct ohms. At room temp it measured 2200 ohms and in a boiling pot of water it was 174. According to pj it should have been 1000 at room temp but in the thread Green Machine posted these were the specs given. Temp..........Factory (Ohms) 70..............490 180.............130 200.............110 Either way mine won't work. So, EROC if you still have the correct sender I need one for sure. However, I'm completely broke at the moment so it will be a few days before I can even afford $25 but I will definitely take one when I have the dough. __________________ Old Yeller

05-24-2006, 01:03 PM	#15
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Re: FS 3/8 Temperature Sensors Usually hate to bring old threads up.. But we are putting a '96 vortec 350 in a blazer at the shop and need a sending unit for it. so it will work with the early style gauge. You still have some?? __________________ Support The Board Last edited by drink2mny; 05-24-2006 at 01:13 PM.

05-25-2006, 11:52 AM	#16
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Re: FS 3/8 Temperature Sensors ya there EROC?? __________________ Support The Board

05-25-2006, 12:07 PM	#17
EROC Active Member Join Date: Jan 2005 Location: Salem,Virginia Posts: 123	Re: FS 3/8 Temperature Sensors I can make a few more. PM sent. __________________ 69 GMC 2500 Camper Special 88 S10 Pickup 04 Impala I ship UPS from 24153

05-25-2006, 12:12 PM	#18
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Re: FS 3/8 Temperature Sensors back at ya.. __________________ Support The Board



Register or Log In To remove these advertisements.

04-06-2007, 07:42 PM	#19
67stepside Registered User Join Date: Jan 2002 Location: Columbus, IN. USA Posts: 140	Re: FS 3/8 Temperature Sensors I PM'd you. I am interested in one of these. Thanks

01-30-2013, 11:55 PM	#20
cwsohm Registered User Join Date: Apr 2012 Location: Sacramento, CA Posts: 13	Re: FS 3/8 Temperature Sensors If you still have any of the 3/8 NPT temperature sending units, I would love to buy one. New to the forum so not sure how to PM you, but will try to figure it out. Posted via Mobile Device

01-31-2013, 06:23 AM	#21
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: FS 3/8 Temperature Sensors ** original poster not active since 2010 ** __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

02-05-2013, 04:53 PM	#22
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: FS 3/8 Temperature Sensors I'm interested in one too if anyone knows where to get one. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-05-2013, 07:01 PM	#23
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: FS 3/8 Temperature Sensors I just had one made. I bought the sensor at advance auto parts, then took it into work to our machine shop and had them do a G job for me. Any machine shop should be able to do this for you. Not sure what they would charge though. And I am not sure how accurate the sensor will be now?

02-05-2013, 11:40 PM	#24
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: FS 3/8 Temperature Sensors That's what we are thinking about doing, but as common as the need for this is, it seems like someone would be selling them. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

Register or Log In To remove these advertisements.