Parting 72 Jimmy in WA... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PICKMUP** · 04-22-2006, 11:56 PM

Sorry, but you will have to come get the big stuff...and do bring tools.

Just got it today...looks like a very solid tub/floor/rocker boxes. Will need rockers and a little other. I haven't checked the WS area yet...$500 (just the bare tub).
TH350/adapter/205 complete and together...very clean...$700.
Alum wheels & 35x12.5x15 OK...$295.
Roll bar...$100.
Nice back seat w/belts...$150.
4" Lift kit/blocks/Rancho shocks...$200.
Matching differentials (ratio unknown now)...$400 pr.

**chevy71super** · 04-23-2006, 12:10 AM

How many inch lift is it Frank, 4" or 6"? Doug

pumpkin · 04-23-2006, 12:53 AM

How much for the frame, tub, and top? And would you take a rusty one as part trade?

cnshoot · 04-23-2006, 01:50 AM

pm sent

Luis_gz06 · 04-23-2006, 02:04 AM

Can you send pic of the seat w/belts.

EFI70Blazer · 04-23-2006, 03:30 AM

Do you have factory power steering brackets for a short water pump that you would part with or is the motor missing? Thanks. Let me know how much if you have them.

gringoloco · 04-23-2006, 05:18 AM

Fuel filler interior cover. PM sent.

albert lancaster · 04-23-2006, 06:31 PM

Are The Seat Belt Black For The Rear Seat? If So I Will Take Them Pindding Price. Do You Have The Front Seat Belt? Thanks!!!

ratrod67 · 04-23-2006, 06:50 PM

Do you have a non tilt auto shift arm like in the pic? If so, how much shipped to 76133? Thanks!

Luis_gz06 · 04-23-2006, 07:48 PM

I'm first on seat with belts.

nathan_454 · 04-23-2006, 08:27 PM

I need the drivers fender if its in good shape. passenger door handle if its good... I'm moving back to SW washington end of this week. can come look at it next week sometime?

70gmcjimmy · 04-23-2006, 10:45 PM

Interested in the grille and headlight bezels. Do you have a price and shipping price to 57703? If so a closer pic would be cool. I have paypal if that is required.

Thanks, DAC

**PICKMUP** · 04-24-2006, 12:05 AM

Pics & answers coming tomorrow. Front belts are NICE!

72Bob · 04-24-2006, 12:46 AM

Radio Antenna. Shipped to 98233

Thanks
72BOB

dave666693 · 04-24-2006, 11:45 AM

how about the gas tank and sending unit?

albert lancaster · 04-24-2006, 08:54 PM

First Dibs On Front Belts, Pinding Price...

**PICKMUP** · 04-25-2006, 12:18 AM

Visors: they look OK...$25 + $15 s/h

Luis: Here's the seat & belts. No rips or tears in seat, all three belts.

Albert: Front belts: very good, no cracks in plastic, retracts fine...$100+$15.

Nathan: I have a lot of fenders (new & used) for you to look at...stop by. (360-956-7170)

70GMC: Grill is not good. I may have another one next week, pending prior sale.

72 Bob: New antenna $40 + $10 s/h.

Rollbar is sold.

Metal strips are bad.

Fuel filler tube: I am sure I have one...$20 + 15 s/h

No PS brackets.

Fuel filler cover: I may have one next week.

Shift arm/new: $20 + $10 s/h (use your old knob).

Rolling chassis/body/lift kit local sale pending.

cnshoot · 04-25-2006, 12:20 AM

visors and please check my pm thanks those filler tubes i need the piece at that bolts to the floor also

nathan_454 · 04-25-2006, 01:27 AM

OK i will come up and check out what ya got after im back in washington. thanx

Luis_gz06 · 04-25-2006, 11:57 AM

when you get a chance, can you send pictures of only the rear seat belts. Thanks, Luis.

**PICKMUP** · 04-25-2006, 09:02 PM

OK, this is getting confusing.
Luis asked for rear seat with belts for $150, but he didn't buy them. He is now interested in just the rear belts.

Albert asked for the front belts, but he didn't buy them yet. He also said he would take the rear belts, pending price. Does that mean that when Luis passed on seat w/belts...that Albert is first in line for the rear belts, if I separate them?

Why don't you guys just buy what you speak for and we won't have to break ties!

Who gets the belts?

**PICKMUP** · 04-26-2006, 12:05 AM

Luis & Albert: You guys need to work this out and agree on who gets the rear belts. IF you can't agree, I may have to pull the rear belt offering just to make sure neither one of you gets over on the other.
I am not going to settle this with PMs. Do it on here, so everyone knows it is fair.

Everyone else: your stuff is coming along fine and I am looking for more of the stuff you asked for.
cnshoot: I Got some dual filler tubes for you tonight.

crzngmychvy · 04-26-2006, 12:12 AM

I'm in too - how much for

- the rear brackets that bolt to the top and the tailgate,

- and if no one else has them yet, both the front and rear seat belts.

shipped to 92113.

THANKS!

Brad · 04-26-2006, 12:33 AM

Frank, can I get a price on the thingamajig off the whachamacallit? Oh, also I only want two of those catastrophic converters.

Davy · 04-26-2006, 11:01 AM

Are the metal strips that hold the weatherstriping on the sides of the tailgate opening any good? (the short ones in pic #3 in your first post)

Thanks,
Davy

04-22-2006, 11:56 PM	#1
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Parting 72 Jimmy in WA... Sorry, but you will have to come get the big stuff...and do bring tools. Just got it today...looks like a very solid tub/floor/rocker boxes. Will need rockers and a little other. I haven't checked the WS area yet...$500 (just the bare tub). TH350/adapter/205 complete and together...very clean...$700. Alum wheels & 35x12.5x15 OK...$295. Roll bar...$100. Nice back seat w/belts...$150. 4" Lift kit/blocks/Rancho shocks...$200. Matching differentials (ratio unknown now)...$400 pr. Attached Images Last edited by PICKMUP; 04-23-2006 at 11:53 AM.

04-23-2006, 12:10 AM	#2
chevy71super Registered User Join Date: Jan 2002 Location: So Cal Posts: 658	Re: Parting 72 Jimmy in WA... How many inch lift is it Frank, 4" or 6"? Doug __________________ 71 Cheyenne Super 4X4 SB 72 Cheyenne Super 4X4 SB 72 Cheyenne 4X4 SB

04-23-2006, 01:50 AM	#4
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	Re: Parting 72 Jimmy in WA... pm sent __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

04-23-2006, 02:04 AM	#5
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Parting 72 Jimmy in WA... Can you send pic of the seat w/belts.

04-23-2006, 03:30 AM	#6
EFI70Blazer Active Member Join Date: Apr 2006 Location: Pendleton, OR Posts: 243	Re: Parting 72 Jimmy in WA... Do you have factory power steering brackets for a short water pump that you would part with or is the motor missing? Thanks. Let me know how much if you have them. __________________ Mike T. Oregon 70 GMC Jimmy 4x4 70 Camaro LS1 plans in the works 71 RS/SS Camaro numbers matching 86 Chevy Silverado SWB 4x4 (454 merlin heads, 3/4 running gear upgrade, Detroit lockers front and rear)

04-23-2006, 12:53 AM	#3
pumpkin Registered User Join Date: Apr 2006 Location: East Sooke B.C. Canada Posts: 543	Re: Parting 72 Jimmy in WA... How much for the frame, tub, and top? And would you take a rusty one as part trade?

04-23-2006, 05:18 AM	#7
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Parting 72 Jimmy in WA... Fuel filler interior cover. PM sent. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-23-2006, 06:31 PM	#8
albert lancaster Registered User Join Date: Jan 2006 Location: san bernardino, CA Posts: 63	Re: Parting 72 Jimmy in WA... Are The Seat Belt Black For The Rear Seat? If So I Will Take Them Pindding Price. Do You Have The Front Seat Belt? Thanks!!!

04-23-2006, 06:50 PM	#9
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Re: Parting 72 Jimmy in WA... Do you have a non tilt auto shift arm like in the pic? If so, how much shipped to 76133? Thanks! Attached Images

04-23-2006, 07:48 PM	#10
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Parting 72 Jimmy in WA... I'm first on seat with belts.

04-23-2006, 08:27 PM	#11
nathan_454 Registered User Join Date: Feb 2003 Location: Centralia, Wa Posts: 109	Re: Parting 72 Jimmy in WA... I need the drivers fender if its in good shape. passenger door handle if its good... I'm moving back to SW washington end of this week. can come look at it next week sometime?

04-23-2006, 10:45 PM	#12
70gmcjimmy GMCDAC Join Date: Apr 2006 Location: Rapid City, SD Posts: 837	Re: Parting 72 Jimmy in WA... Interested in the grille and headlight bezels. Do you have a price and shipping price to 57703? If so a closer pic would be cool. I have paypal if that is required. Thanks, DAC __________________ 1970 GMC K5 Jimmy Custom 4X4 Mom's driver from 1971 to 2001!! Under rebuild! 1972 GMC C2500 Pickup owned since 1979 Needs a rest and refurbish! 1955 GMC 100 2nd design driven almost daily! Rest In Peace Mom. "Dolly" 7/15/23 - 5/18/09 GMC driver for 30 years!

04-24-2006, 12:05 AM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Parting 72 Jimmy in WA... Pics & answers coming tomorrow. Front belts are NICE!

04-24-2006, 12:46 AM	#14
72Bob Registered User Join Date: Sep 2002 Location: Burlington, WA Posts: 298	Re: Parting 72 Jimmy in WA... Radio Antenna. Shipped to 98233 Thanks 72BOB __________________ 1971 GMC Sierra 3/4 Ton 4x4 1972 Chevrolet SWB 4x4 RIP LeRoy

04-24-2006, 11:45 AM	#15
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 901	Re: Parting 72 Jimmy in WA... how about the gas tank and sending unit?



Register or Log In To remove these advertisements.

04-24-2006, 08:54 PM	#16
albert lancaster Registered User Join Date: Jan 2006 Location: san bernardino, CA Posts: 63	Re: Parting 72 Jimmy in WA... First Dibs On Front Belts, Pinding Price...

04-25-2006, 12:18 AM	#17
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Parting 72 Jimmy in WA... Visors: they look OK...$25 + $15 s/h Luis: Here's the seat & belts. No rips or tears in seat, all three belts. Albert: Front belts: very good, no cracks in plastic, retracts fine...$100+$15. Nathan: I have a lot of fenders (new & used) for you to look at...stop by. (360-956-7170) 70GMC: Grill is not good. I may have another one next week, pending prior sale. 72 Bob: New antenna $40 + $10 s/h. Rollbar is sold. Metal strips are bad. Fuel filler tube: I am sure I have one...$20 + 15 s/h No PS brackets. Fuel filler cover: I may have one next week. Shift arm/new: $20 + $10 s/h (use your old knob). Rolling chassis/body/lift kit local sale pending. Attached Images Last edited by PICKMUP; 04-25-2006 at 01:03 AM.

04-25-2006, 12:20 AM	#18
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	Re: Parting 72 Jimmy in WA... visors and please check my pm thanks those filler tubes i need the piece at that bolts to the floor also __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4 Last edited by cnshoot; 04-25-2006 at 12:22 AM.

04-25-2006, 01:27 AM	#19
nathan_454 Registered User Join Date: Feb 2003 Location: Centralia, Wa Posts: 109	Re: Parting 72 Jimmy in WA... OK i will come up and check out what ya got after im back in washington. thanx

04-25-2006, 11:57 AM	#20
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Parting 72 Jimmy in WA... when you get a chance, can you send pictures of only the rear seat belts. Thanks, Luis.

04-25-2006, 09:02 PM	#21
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Parting 72 Jimmy in WA... OK, this is getting confusing. Luis asked for rear seat with belts for $150, but he didn't buy them. He is now interested in just the rear belts. Albert asked for the front belts, but he didn't buy them yet. He also said he would take the rear belts, pending price. Does that mean that when Luis passed on seat w/belts...that Albert is first in line for the rear belts, if I separate them? Why don't you guys just buy what you speak for and we won't have to break ties! Who gets the belts?

04-26-2006, 12:05 AM	#22
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Parting 72 Jimmy in WA... Luis & Albert: You guys need to work this out and agree on who gets the rear belts. IF you can't agree, I may have to pull the rear belt offering just to make sure neither one of you gets over on the other. I am not going to settle this with PMs. Do it on here, so everyone knows it is fair. Everyone else: your stuff is coming along fine and I am looking for more of the stuff you asked for. cnshoot: I Got some dual filler tubes for you tonight.

04-26-2006, 12:12 AM	#23
crzngmychvy "1972 C5" Join Date: Jul 2004 Location: SoCal Posts: 729	Re: Parting 72 Jimmy in WA... I'm in too - how much for - the rear brackets that bolt to the top and the tailgate, - and if no one else has them yet, both the front and rear seat belts. shipped to 92113. THANKS! __________________ - 72 2wd Blazer ...sold... 2wd Blazer Page

04-26-2006, 12:33 AM	#24
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: Parting 72 Jimmy in WA... Frank, can I get a price on the thingamajig off the whachamacallit? Oh, also I only want two of those catastrophic converters. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

04-26-2006, 11:01 AM	#25
Davy Registered User Join Date: Apr 2003 Location: Rice, Minnesota Posts: 370	Re: Parting 72 Jimmy in WA... Are the metal strips that hold the weatherstriping on the sides of the tailgate opening any good? (the short ones in pic #3 in your first post) Thanks, Davy __________________ 1970 Blazer CST Looking for NOS items for my CST restoration.

Register or Log In To remove these advertisements.