406 " sbc FOR SALE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1987 Shortwide · 04-24-2006, 01:01 PM

I'm needing to get rid of the motor in my truck.

I bought it from my brother about 2 years ago, and he had put about 2000-2500 miles on it is all.

-400 block bored .030 (all work done when it was rebuild, freeze plugs, cam bearings, etc. etc. etc.)
-400 78cc Iron heads, larger exhaust valves, complete valve job (the heads have had a good amount of work done to them for a power adder application...
-Crane cam (nitrous cam, can get more specs later)
-GM cast crank checked over and polished during rebuild
-reconditioned GM rods (again, when rebuild was done)
-TRW forged pistons (8.2:1 compression with 78cc heads)
-Holley Contender intake (zero miles on fresh ceramic coating)
-billet chain cover (Cloyes True Roller)
-aluminum roller tip rockers
-Holley 600 cfm carb with vaccum secondaries and annular discharge squirters

This motor is estimated at about 400-430 hp a the flywheel N/A, and the compression will allow for a bit of nitrous or some boost like I was planning on running.
Will sell carb to pan with chrome valve covers for $3,000.

Can get pics up also if interested.

stevenfriesen@cox.net

wibilly · 06-30-2006, 01:01 AM

just curious as to how you came up with those hp ratings?

LOHRTBT · 06-30-2006, 10:04 AM

WTH?? Why you sellin it mang?

79BIG10 · 06-30-2006, 10:43 PM

Quote:

Originally Posted by LOHRTBT

WTH?? Why you sellin it mang?

Enquiring minds like me want to know.

1987 Shortwide · 07-03-2006, 10:55 AM

Was going to step up to something forged so that I could sling about 25 lbs. of boost at it. Decided to just run what I've got. 12 lbs. should still net me like 700 hp at the wheels so I'm not one to argue.... lol

04-24-2006, 01:01 PM	#1
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	406 " sbc FOR SALE I'm needing to get rid of the motor in my truck. I bought it from my brother about 2 years ago, and he had put about 2000-2500 miles on it is all. -400 block bored .030 (all work done when it was rebuild, freeze plugs, cam bearings, etc. etc. etc.) -400 78cc Iron heads, larger exhaust valves, complete valve job (the heads have had a good amount of work done to them for a power adder application... -Crane cam (nitrous cam, can get more specs later) -GM cast crank checked over and polished during rebuild -reconditioned GM rods (again, when rebuild was done) -TRW forged pistons (8.2:1 compression with 78cc heads) -Holley Contender intake (zero miles on fresh ceramic coating) -billet chain cover (Cloyes True Roller) -aluminum roller tip rockers -Holley 600 cfm carb with vaccum secondaries and annular discharge squirters This motor is estimated at about 400-430 hp a the flywheel N/A, and the compression will allow for a bit of nitrous or some boost like I was planning on running. Will sell carb to pan with chrome valve covers for $3,000. Can get pics up also if interested. stevenfriesen@cox.net __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean. Last edited by 1987 Shortwide; 04-24-2006 at 08:12 PM.

06-30-2006, 01:01 AM	#2
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: 406 " sbc FOR SALE just curious as to how you came up with those hp ratings? __________________ common sense isn't so common anymore

06-30-2006, 10:04 AM	#3
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: 406 " sbc FOR SALE WTH?? Why you sellin it mang? __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

07-03-2006, 10:55 AM	#5
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	Re: 406 " sbc FOR SALE Was going to step up to something forged so that I could sling about 25 lbs. of boost at it. Decided to just run what I've got. 12 lbs. should still net me like 700 hp at the wheels so I'm not one to argue.... lol __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.