Checking interest in 77 Burb parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregbr · 05-01-2006, 10:01 PM

I recently picked up a rusty 77 Burb 2wd..... body is pretty shot but it's all there front to rear. Anyone need specific parts? Interior is tan with brown dash pad & woodgrain bezel. Will get pics soon....

Per board rules: 15" factory hub cap set...good condition...$20 + ride.

Greg

mhicks · 05-02-2006, 07:21 AM

I'd like to see a good picture of the bezel.

dpmalibu · 05-02-2006, 03:28 PM

Does it have rear A/C? I might need the A/C hoses it I don't sell mine.

gregbr · 05-02-2006, 11:11 PM

I will get some pics on Wednesday evening & yes it has the rear a/c. Greg

gregbr · 05-03-2006, 06:54 PM

Got pics of the rear a/c & gauge bezel....and a couple of the truck. If you see something you need, let me know. Thanks, Greg

gregbr · 05-03-2006, 07:02 PM

Gauge bezel....woodgrainin good condition, chrome around gauge opening is wearing. $60 shipped.

Matching woodgrain panel above glovebox in good condition. $30 shipped.

Let me know if you need different pics.....Greg

Southedisto · 05-03-2006, 08:04 PM

How about the steering box, pump, and bracketry?

gregbr · 05-03-2006, 08:29 PM

Southedisto, Would you be willing to pick up? I'll take $100 for untested pump/box/brackets. Truck has not ran in about 1 year, so I don't know the condition. It would be a couple days before I could remove it. Greg

mhicks · 05-04-2006, 07:26 AM

Little too steep on the bezel, I think I'll pass. How much for the steering wheel?
Thanks,
Mike

gregbr · 05-04-2006, 11:51 AM

Make me an offer on bezel and steering wheel. Greg

norville · 05-04-2006, 12:56 PM

I'm interested in all the ac lines if they're still available.

bob

norville · 05-04-2006, 01:00 PM

Does it have rear shoulder belts? Im interested.

bob

eagle23 · 05-04-2006, 07:46 PM

What shape are the two front doors in? I don't need the interior panels, but I do want rust-free doors. Looks like the outsides are pretty good.

Pix?

I can probably pick them up when I am in Charlotte next month of it's not a problem.

Brian

gregbr · 05-05-2006, 01:05 PM

norville...all a/c stuff is still available. I will let you know about the rear belts. The truck is across town at a relatives house.

eagle23...will get back with you about the doors. I'd be surprised if they're NOT rusted, bu I didn't look that closely at them.

Will know more by Sunday at the latest. Thanks, Greg

gregbr · 05-07-2006, 02:46 PM

eagle23... The drivers door is rusted out slightly on the very bottom edge and seam. The pass side has slight rust on the bottom seam, but does not appear to be rusted thru anywhere. I can get a couple better pics in a day or 2 when it's not raining. Greg

gregbr · 05-09-2006, 04:17 PM

eagle23.. Both door have rust thru on the bottom couple inches. Anything else?

norville.. Empty your PM box. Shipped the hoses.

mhicks.. Shipped bezel & steering wheel.

Thanks, Greg

eagle23 · 05-09-2006, 06:16 PM

Nothing else; thanks anyway!

dpmalibu · 05-09-2006, 11:53 PM

I guess I missed out on the A/C hoses. Did he buy everything? I need all the Rear A/c hoses. If they are still available let me know.Thanks

gregbr · 05-10-2006, 11:55 AM

All a/c hoses are gone. Greg

gregbr · 05-12-2006, 04:57 PM

Anybody else?? Greg

gregbr · 05-24-2006, 05:59 AM

ttt

Bryankiwi · 06-21-2006, 07:55 AM

Hi there do you still have the sub im looking for all the plastic trim that goes around the top on the inside and the hood lineing and the front seat blets

gregbr · 06-21-2006, 02:47 PM

Bryankiwi, Are you wanting the trim that goes up the front pillars and around the top of the windshield? I will have to see what's there. Will also check the hood and seat belts. It may be a couple days, but I'll let you know. Greg

**ScottH** · 06-21-2006, 03:22 PM

Greg, are the door panels available? If so could you get pics of both and price including shipping to 08753.

Thanks.

Scott

Bryankiwi · 06-21-2006, 04:49 PM

yep that is the trim that I want and I think maybe all of the inside trim if you can and a front arm rest aswell

05-01-2006, 10:01 PM	#1
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Checking interest in 77 Burb parts I recently picked up a rusty 77 Burb 2wd..... body is pretty shot but it's all there front to rear. Anyone need specific parts? Interior is tan with brown dash pad & woodgrain bezel. Will get pics soon.... Per board rules: 15" factory hub cap set...good condition...$20 + ride. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-02-2006, 07:21 AM	#2
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Re: Checking interest in 77 Burb parts I'd like to see a good picture of the bezel.

05-02-2006, 03:28 PM	#3
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: Checking interest in 77 Burb parts Does it have rear A/C? I might need the A/C hoses it I don't sell mine.

05-02-2006, 11:11 PM	#4
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts I will get some pics on Wednesday evening & yes it has the rear a/c. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-03-2006, 06:54 PM	#5
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts Got pics of the rear a/c & gauge bezel....and a couple of the truck. If you see something you need, let me know. Thanks, Greg Attached Images __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-03-2006, 07:02 PM	#6
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts Gauge bezel....woodgrainin good condition, chrome around gauge opening is wearing. $60 shipped. Matching woodgrain panel above glovebox in good condition. $30 shipped. Let me know if you need different pics.....Greg Attached Images __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-03-2006, 08:04 PM	#7
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: Checking interest in 77 Burb parts How about the steering box, pump, and bracketry? __________________ I like wheelin in Dixie!

05-03-2006, 08:29 PM	#8
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts Southedisto, Would you be willing to pick up? I'll take $100 for untested pump/box/brackets. Truck has not ran in about 1 year, so I don't know the condition. It would be a couple days before I could remove it. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-04-2006, 07:26 AM	#9
mhicks Registered User Join Date: Jan 2004 Location: Weatherford,Tx Posts: 747	Re: Checking interest in 77 Burb parts Little too steep on the bezel, I think I'll pass. How much for the steering wheel? Thanks, Mike

05-04-2006, 11:51 AM	#10
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts Make me an offer on bezel and steering wheel. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-04-2006, 12:56 PM	#11
norville Senior Member Join Date: Jun 2004 Location: Mountain Top, Pa Posts: 323	Re: Checking interest in 77 Burb parts I'm interested in all the ac lines if they're still available. bob __________________ 1986 C10 Scottsdale 5.3, TH400

05-04-2006, 01:00 PM	#12
norville Senior Member Join Date: Jun 2004 Location: Mountain Top, Pa Posts: 323	Re: Checking interest in 77 Burb parts Does it have rear shoulder belts? Im interested. bob __________________ 1986 C10 Scottsdale 5.3, TH400

05-04-2006, 07:46 PM	#13
eagle23 Active Member Join Date: Feb 2004 Location: Atlanta GA Posts: 174	Re: Checking interest in 77 Burb parts What shape are the two front doors in? I don't need the interior panels, but I do want rust-free doors. Looks like the outsides are pretty good. Pix? I can probably pick them up when I am in Charlotte next month of it's not a problem. Brian

05-05-2006, 01:05 PM	#14
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts norville...all a/c stuff is still available. I will let you know about the rear belts. The truck is across town at a relatives house. eagle23...will get back with you about the doors. I'd be surprised if they're NOT rusted, bu I didn't look that closely at them. Will know more by Sunday at the latest. Thanks, Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-07-2006, 02:46 PM	#15
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts eagle23... The drivers door is rusted out slightly on the very bottom edge and seam. The pass side has slight rust on the bottom seam, but does not appear to be rusted thru anywhere. I can get a couple better pics in a day or 2 when it's not raining. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424



Register or Log In To remove these advertisements.

05-09-2006, 04:17 PM	#16
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts eagle23.. Both door have rust thru on the bottom couple inches. Anything else? norville.. Empty your PM box. Shipped the hoses. mhicks.. Shipped bezel & steering wheel. Thanks, Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-09-2006, 06:16 PM	#17
eagle23 Active Member Join Date: Feb 2004 Location: Atlanta GA Posts: 174	Re: Checking interest in 77 Burb parts Nothing else; thanks anyway!

05-09-2006, 11:53 PM	#18
dpmalibu Registered User Join Date: Dec 2004 Location: Hatboro,PA Posts: 367	Re: Checking interest in 77 Burb parts I guess I missed out on the A/C hoses. Did he buy everything? I need all the Rear A/c hoses. If they are still available let me know.Thanks

05-10-2006, 11:55 AM	#19
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts All a/c hoses are gone. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-12-2006, 04:57 PM	#20
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts Anybody else?? Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

05-24-2006, 05:59 AM	#21
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts ttt __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

06-21-2006, 07:55 AM	#22
Bryankiwi Registered User Join Date: Aug 2005 Location: New Zealand Posts: 62	Re: Checking interest in 77 Burb parts Hi there do you still have the sub im looking for all the plastic trim that goes around the top on the inside and the hood lineing and the front seat blets

06-21-2006, 02:47 PM	#23
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Checking interest in 77 Burb parts Bryankiwi, Are you wanting the trim that goes up the front pillars and around the top of the windshield? I will have to see what's there. Will also check the hood and seat belts. It may be a couple days, but I'll let you know. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

06-21-2006, 03:22 PM	#24
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: Checking interest in 77 Burb parts Greg, are the door panels available? If so could you get pics of both and price including shipping to 08753. Thanks. Scott

06-21-2006, 04:49 PM	#25
Bryankiwi Registered User Join Date: Aug 2005 Location: New Zealand Posts: 62	Re: Checking interest in 77 Burb parts yep that is the trim that I want and I think maybe all of the inside trim if you can and a front arm rest aswell

Register or Log In To remove these advertisements.