1970 C/10 Project or Parts Truck For Sale In South Carolina

[Bryan H]

I have a 70 lb fleetside I was going to convert to a sb but can't find the time so I'm selling it along with the extra parts. The truck itself needs inner and outer rockers, cab corners, brakes, tires, and TLC. It also has some rust around the lower dash. It runs, drives, and stops but the brakes pull hard to the right. The dr. fender, dr. door, hood, bed (little rust in the bottom but the bed sides have no rust) are in real good shape and have no rust. The tailgate is good and straight but has some pin holes at the bottom of it. Its a 6 cyl., 3-speed and coil spring rear suspension. I have all 4 steel factory wheels. I'm asking $600 for the truck. It has a clear title and I think the paint on it is original also. Its actually worth parting out but I just don't have the time. The shortbed stepside bed is rustfree and straight but needs the wood & strips in the bed.It also has a good primered tailgate. I'm wanting $300 for it. I also have a shortbed coil spring frame with 71 model 5 lug disc and 5 lug rearend. It needs braklines. $300 for it also. I would take $1000 for the whole package. I'm in Spartanburg, SC. You can PM me or can call my home Phone # is (864) 599-6380. My email is 81Malibu@bellsouth.net if you are interested. I also have plenty of pics if you want me to send them send me your email.

[Bryan H]

I forgot to mention that the engine was recently tuned. It has a new cap, rotor, plugs, wires, hoses, oil change, etc. The truck also has a new battery. When I got the truck the motor was bad. I bought an engine from a friend of mine. It runs fine and the trans seems to shift fine. The column sometimes binds between gears.

[Bryan H]

bump ttt

[winston]

I would like to have first offer on the step bed pending more pictures and what part of south carolina you are in. I will be going to Ft Stewart GA in june.

[Down south truckin]

more pictures please

[_Dick_]

i left you mail about the truck

[Bryan H]

Here are a couple more pics. If you need any specific area pic taken let me know and I will send them to you.
Thanks,
Bryan

[Bryan H]

A few people have email me wondering if they can drive the truck home. The tires are shot and I'm sure the frontend could stand bushings and ball joints. The brakes feel as though one of the rubber hoses on the front is clapsed. I would not be responsible whatever you decided to do. If it was me I would just bring a trailer.
Thanks,
Bryan

[Bryan H]

Anybody interested before I start parting the truck out? I would take $900 for eveything.
Bryan

[Bryan H]

Winston,
Here are some more pics of the bed you ask me to post. The rust inside the bed is just surface rust. I bought the tailgate off of a fellow board member not too long ago.

[Bryan H]

Bed is sold!!!!