|
05-28-2006, 09:47 AM
|
#1 |
|
Account Suspended
Join Date: May 2006
Location: MA
Posts: 91
|
new from Mass
Hello all I just found this site... mainly hoping to find info on hom much work it would be to swap out my 72 chevy K10 frame to a 73-87 frame...
I recently purchased the K10 but it is the 3rd 67-72 I have owned... my first project was a 72 GMC 1500 4x4... never got to finish because I went into the air force and when I Was gone my brother in law blew the motor and then took it over... when I got home I was going to purchase it back but he wanted to much money for it... he paid me $1500 for it... he wanted $6000 for it back... in non running condition.. O well my second 72 was a chevy C10. it was a daily driver-fun to drive truck and fixer upper... I put lots of time and money into it.. but when I moved from Ga to Fl I could not take more then one vehicle to the chevy had to go..  The new 71 K10 4x4 I purchased about a week ago.. it runs ( I would not say great) but it runs and drives... needs a little ( understatment ) work and the frame is a little gone... so if anyone has any info on the frame swap and could aim me in the right direction that would be great... sence I purchased it on monday I have replaced the exaust with a dual dynomax 2-1\2 inch exaust and have welded up the holes in the frame as a temporary fix... waiting on my LMC catolog so I can drop a boat load of money into that store... so main thing I don't know much about is the frame swap.. I am going to try and find a solid 72 frame but in the case of that being impossible I want to know the steps... this truck is going to be a driver-weekend fun truck and I am going to drive it and slowly restore it... my plans as of now are 4 inch lift and 34 inch tires we shall see though... 
|
|
|
|
05-28-2006, 11:18 AM
|
#2 |
|
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,019
|
Re: new from Mass
Welcome to the site!,nice truck,you might want to post this in the 67-72 forum.Btw,How bad is the frame,under all conditions I would try to avoid
the 73+ frame. |
|
|
|
|
05-28-2006, 11:58 AM
|
#3 |
|
Gone Fishing
Join Date: Aug 2005
Location: Fort Worth, Texas 76135
Posts: 12,361
|
Re: new from Mass
Welcome to the board from Texas
__________________
68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop  Frame of resto has been started2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616 |
|
|
|
|
05-28-2006, 12:10 PM
|
#4 | |
|
Account Suspended
Join Date: May 2006
Location: MA
Posts: 91
|
Re: new from Mass
Quote:
  and this is my attempt at a temporary fix...   
|
|
|
|
|
|
05-28-2006, 12:18 PM
|
#5 |
|
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,019
|
Re: new from Mass
Wow,I have never seen rust that bad,I would try,try,try to find a 67-72 frame
and if you cant find one then use a 73+ frame as a last resort,the 73+ frames are different. |
|
|
|
|
05-28-2006, 02:45 PM
|
#6 |
|
Account Suspended
Join Date: May 2006
Location: MA
Posts: 91
|
Re: new from Mass
yeah rust is bad in mass... I have seen 87 frames look not much better... I have been looking around... I think there are small differeces with the way the body mounts.. but will see.. I would love to find a 72 in the bone yard to use but I'm 0 for 2 at the local yards...
|
|
|
|
|
05-28-2006, 08:06 PM
|
#7 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: new from Mass
Check with Mudder67 (drop him a pm) and he can set you up on the frame swap, his truck is bad!!
Before giving LMC a LOT of your money try some of the vendors listed here.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
05-28-2006, 08:44 PM
|
#8 |
|
Born a Chevy Man
Join Date: Apr 2005
Location: Navarre, Florida
Posts: 10,221
|
Re: new from Mass
But welcome to the best board on the net from Kentucky.
__________________
John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 *1986 Chevy SWB Silverado *1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride!  If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER!  GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS |
|
|
|
|
05-28-2006, 11:34 PM
|
#9 |
|
Born To Lose Club
 
Join Date: Feb 2003
Location: Calgary, Alberta/Oxenden, Ontario, Great White North
Posts: 13,307
|
Re: new from Mass
 To The Boards From Brian Of Olds...Alberta, Canada.
__________________
Brian Smith  - "Born To Lose"1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154. |
|
|
|
|
05-29-2006, 12:16 PM
|
#10 | |
|
Account Suspended
Join Date: May 2006
Location: MA
Posts: 91
|
Re: new from Mass
Quote:
http://www.gmcpauls.com/72%20C10.htm I miss it now 
|
|
|
|
|
|
05-29-2006, 07:26 PM
|
#11 |
|
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,468
|
Re: new from Mass
From West TN 
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
|
|
|
|
05-31-2006, 12:26 PM
|
#12 |
|
MooMoo
Join Date: Feb 2004
Location: Shapleigh, Maine
Posts: 2,424
|
Re: new from Mass
Welcome from maine
__________________
'97 ext 4x4 3" body lift and 7'6" Fisher MM2 '04 Polaris 700 twin EFI **sold 2-1-07** '07 Polaris 800 twin EFI Stealth Limited Edition Support the Board! Or deal with me foo!  Its all fun and games till you find out shes 16. 
|
|
|
|
|
05-31-2006, 12:39 PM
|
#13 |
|
Registered User
Join Date: Jun 2000
Location: Bismarck, ND
Posts: 4,297
|
Re: new from Mass
Welcome from ND
GO SOX, YES??
__________________
Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club. |
|
|
|
|
05-31-2006, 04:35 PM
|
#14 |
|
Registered User
Join Date: Aug 2002
Location: mass
Posts: 1,277
|
Re: new from Mass
welcome from mass, good luck with the frame swap.
|
|
|
|
|
10-24-2006, 10:20 PM
|
#15 |
|
Sb 400 club
Join Date: Nov 2005
Location: NH / MA
Posts: 2,746
|
Re: new from Mass
wow another one from MA ha ha ah. Yeah The salt up here eats them away. But i would just like to help you out with the frame search. I know of two in junkyards in Ma and sothern NH one is a dup truck and the other is a 2wd i think the 2wd has a good frame but don't know if it is a short bed and don't know if you can use it. I would haved PM you but have no way to do so. It is located at BrandyBrow auto parts in Haverhill ma or it is in Plastow Nh
__________________
1984 chevy c10, built 400sb,.(SOLD )77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out |
|
|
|
|
10-25-2006, 11:37 AM
|
#16 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,733
|
Re: new from Mass
Welcome
|
|
|
|
|
10-27-2006, 01:34 AM
|
#17 |
|
Its always something!
Join Date: Aug 2005
Location: FT Worth,TX
Posts: 4,992
|
Re: new from Mass
Welcome from FT Worth TX.
__________________
79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f*** short fleet 63 C 60 Flatbed  Member of the patina club |
|
|
|
|
10-31-2006, 05:31 AM
|
#18 |
|
Senior Member
Join Date: Jun 2005
Location: Clovis Ca.
Posts: 3,311
|
Re: new from Mass
Welcome to the board!
__________________
Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4 |
|
|
|
|
11-01-2006, 03:49 PM
|
#19 |
|
Insert Title Here
Join Date: Feb 2006
Location: Dyer, Indiana
Posts: 5,679
|
Re: new from Mass
welcome to the site
__________________
BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << |
|
|
|
|
11-02-2006, 08:32 PM
|
#20 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,606
|
Re: new from Mass
No longer welcome it looks like....
__________________
GO BIG GREEN  GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
11-03-2006, 02:28 PM
|
#21 | |
|
Just here to help
Join Date: Jan 2002
Location: Norwood,Mo
Posts: 3,890
|
Re: new from Mass
 Quote:
|
|
|
|
|
|
11-04-2006, 12:56 AM
|
#22 |
|
RIP Mr Ron
Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,150
|
Re: new from Mass
I guess I had better step up the welcomes so they don't get banned first.
__________________
Ron (Mr Round Tuit)  Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
