new gas door,tailgate and bed............. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

QKENUF4U · 06-01-2006, 09:14 PM

this is the bed i picked up last week from doug. its already been tubbed and roll pan installed. it needs some very minor bodywork.
i had to get the gas fill done before i could think about pulling my old bed and putting this one in place. got that done today. i used a gas fill for a boat and a GATES 90* fuel filler hose (thanks NAPA). its gonna work out perfect for me. i just hope AZ. EMISSIONS doesnt have a problem with it since there is no REMOVALBE gas cap to test. if they do i will have to go to a different one that i seen with a cap.

i picked the tailgate up the other day for 60$ and had it in primer by sunday.

had to a little bit of body work (couple small dents) to fix but no biggie. just gave me an excuse to go to HARBOR FREIGHT and buy the INLINE sander ive been wanting.

QKENUF4U · 06-01-2006, 09:22 PM

tailgate.
oh and anyone got any ideas about how to get a small bow out of a tailgate ?
thanks
lance

matthufham · 06-03-2006, 05:05 PM

man that's gonna look good!

72armyswbtruck · 06-03-2006, 05:22 PM

good luck on the bow

**Hart_Rod** · 06-04-2006, 11:02 AM

Take 2 4 X 4's and place at each end. Take an 80lb bag of quickcrete and put in the middle and let it sit in the sun for a couple of days.

67ChevyRedneck · 06-04-2006, 05:04 PM

You were able to actually get that size fuel hose from napa??? Do they carry the large fuel hose sizes in stock and dare I ask.... how much was it? I need some 2 1/4" for my silverado fuel door I added to my blazer tank.... the flippin yard I bought my filler from cut the hose instead of pulling it off

Jebb1978 · 06-14-2006, 12:24 PM

No need to repost Lance, I found it.
Thanks

Sounds like a great deal

**SactoJim** · 06-14-2006, 03:49 PM

QKENUF4U - Are you going for the Prostreet look or are you just putting some wide meats on the back.....and if so, what size are ya gonna run.

I was thinking about doing something like that just to put serious rubber on so it looked pretty "fat" from the rear.

06-01-2006, 09:14 PM	#1
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	new gas door,tailgate and bed............. this is the bed i picked up last week from doug. its already been tubbed and roll pan installed. it needs some very minor bodywork. i had to get the gas fill done before i could think about pulling my old bed and putting this one in place. got that done today. i used a gas fill for a boat and a GATES 90* fuel filler hose (thanks NAPA). its gonna work out perfect for me. i just hope AZ. EMISSIONS doesnt have a problem with it since there is no REMOVALBE gas cap to test. if they do i will have to go to a different one that i seen with a cap. i picked the tailgate up the other day for 60$ and had it in primer by sunday. had to a little bit of body work (couple small dents) to fix but no biggie. just gave me an excuse to go to HARBOR FREIGHT and buy the INLINE sander ive been wanting. Attached Images Last edited by QKENUF4U; 06-01-2006 at 09:19 PM.

06-01-2006, 09:22 PM	#2
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: new gas door,tailgate and bed............. tailgate. oh and anyone got any ideas about how to get a small bow out of a tailgate ? thanks lance Attached Images Last edited by QKENUF4U; 06-01-2006 at 09:23 PM.

06-03-2006, 05:05 PM	#3
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: new gas door,tailgate and bed............. man that's gonna look good!

06-03-2006, 05:22 PM	#4
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: new gas door,tailgate and bed............. good luck on the bow __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

06-04-2006, 11:02 AM	#5
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: new gas door,tailgate and bed............. Take 2 4 X 4's and place at each end. Take an 80lb bag of quickcrete and put in the middle and let it sit in the sun for a couple of days. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-04-2006, 05:04 PM	#6
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: new gas door,tailgate and bed............. You were able to actually get that size fuel hose from napa??? Do they carry the large fuel hose sizes in stock and dare I ask.... how much was it? I need some 2 1/4" for my silverado fuel door I added to my blazer tank.... the flippin yard I bought my filler from cut the hose instead of pulling it off __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 06-04-2006 at 05:04 PM.

06-14-2006, 12:24 PM	#7
Jebb1978 Senior Member Join Date: Aug 2005 Location: Mesa,Az Posts: 3,713	Re: new gas door,tailgate and bed............. No need to repost Lance, I found it. Thanks Sounds like a great deal __________________ 1959 GMC project Last edited by Jebb1978; 06-14-2006 at 12:24 PM.

06-14-2006, 03:49 PM	#8
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: new gas door,tailgate and bed............. QKENUF4U - Are you going for the Prostreet look or are you just putting some wide meats on the back.....and if so, what size are ya gonna run. I was thinking about doing something like that just to put serious rubber on so it looked pretty "fat" from the rear.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.