bed off....Pics! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyDude · 06-06-2006, 11:12 PM

I got ambitious with all the tools sitting here to yank the bed, so I got after it and here it is. Threw a chain in the rafters attached a 2 ton "come along" to the rafters and put four motorcycle tie downs from the four stake pockets. Got them as tight as I could and hooked the come along to the center and started cranking. Rolled the truck out from under and set the bed back down on six tires. It worked without any mishap whatsoever. On to installing the fuel cell. In the last pic you can get an idea of the rake of the suspension, I'm digging it!

ChevyDude · 06-06-2006, 11:13 PM

last two...for now.

al's71gmc · 06-06-2006, 11:34 PM

Congrats. Progress is fun! I used a backhoe to pull the bed off my son's truck. What are your plans for the fuel filler? I just got a blazer door and filler from Jose to do the sidemarker fill door. Good luck and great pics. Al

ChevyDude · 06-07-2006, 12:03 AM

Haven't fully decided on the fill location. I have a Fuelcellguy 18 gallon aluminum tank that will go in, in the next couple of days after the frame is oven cleaner soaked, blasted, cleaned and painted. I don't think I am going to do the sidemarker fill door...something a lil' diff.

Oldtruckfanatic · 06-07-2006, 12:15 AM

Ok now you're just showin off. first the super clean engine and paint pics and now the bed off pics... I'm gonna have to go out and do something so I don't feel so lazy. All kidding aside thats going to be a really really nice ride.

ChevyDude · 06-07-2006, 12:33 AM

LOL!!! I drank beer all last summer and blew off working on my truck....I'm not kidding. This summer I said no beer and get to working to this truck. So that's what I'm doing every min I'm not doing my real job. Thanks for the nice comment.

Jerry Jones · 06-07-2006, 12:38 AM

Holy cow... NO BEER? Dude, that aint healthy!

Nice ride, looks really nice.

72armyswbtruck · 06-07-2006, 07:18 AM

Nice work, and Nice GUN SAFE!!!!!!!!!!!!

oj70chevy · 06-07-2006, 08:41 AM

Quote:

Originally Posted by Oldtruckfanatic

Ok now you're just showin off. first the super clean engine and paint pics and now the bed off pics... I'm gonna have to go out and do something so I don't feel so lazy. All kidding aside thats going to be a really really nice ride.

I Agree
keep the pic coming. great truck.

Joe67 · 06-07-2006, 09:29 AM

Nice work! That trucks looks sweet to start with and the frame is pretty nice as well.

ChevyDude · 06-07-2006, 10:22 AM

Thanks Guys! Am I doing this resto ASS Backwards or what

??? Cleaning up the frame after the truck has been painted

??? Why the flock did I not do the frame when I was painting the truck

??? What happened was... I was doing a resto on my 72' K-10 which was my daily driver, so I needed a second truck to drive while doing the resto on the K-10. I found this lil' 71' C-10 down in Colorado Springs which was very clean and driveable. It was all extremely straight but was in primer so I took it to get painted. The painter tells me this 71' is too nice and straight to do a crap paint job, and convinces me to let him take it apart for paint some really nice paint. I agree. So he took the entire truck apart and did an awesome paint job on this lil' 71' that was supposed to be my "driver" while I did the K-10 resto. So I get the 71' C-10 back from the painter 9 months after I took it to him, but he flaked and didn't put it all back together. My wife said "Pick one truck and do the one truck right". Since the paint was so awesome I decided to keep the 71' C-10 and put it back together the best I could. So.....this is why it seems that I am doing this truck ASS Backwards. Oh well. I haven't told the wife yet that I need to order one of those ZZ383 motors yet for this Lil' Red truck, LOL!

Here she is when I bought her:

ChevyDude · 06-07-2006, 06:43 PM

Today I got the truck 180'ed and ground & punched the rivets of the two rear cross braces where the fuel tank will go. She is now sitting with 3 cans of oven cleaner a soakin'. 18 gallon Fuelcellguy tank to be fitted after clean and paint.

Gots to go to "real" work now...hasta!!! Don't look at the Mopar flags....that was when I owned a Prowler...sold the Prowler for one of these trucks!!!

chevyboy55 · 06-07-2006, 06:50 PM

Quote:

Originally Posted by ChevyDude

LOL!!! I drank beer all last summer and blew off working on my truck....I'm not kidding. This summer I said no beer and get to working to this truck. So that's what I'm doing every min I'm not doing my real job. Thanks for the nice comment.

Man I hate how real jobs mess up the truly important jobs.

corn · 06-07-2006, 07:43 PM

Cool idea, a cherry picker & motorcycle straps work good too. Nice looking truck BTW...

ChevyDude · 06-08-2006, 04:36 PM

Ok , 3 cans of oven cleaner have been soaking for 24 hrs or so. Got out my 2200 lbs pressure washer and started blasting. Going to do one more oven cleaner soak tonight and blast again tomorrow. The freak in me cannot just paint it together, I'm going to take it apart and change the trailering arms bushing and do it right. The little spots are rain drops. It started to rain after I had blasted it and it wa drying.

matthufham · 06-08-2006, 04:53 PM

hmm i just learned the trailing arm crossmember is under the cab on a shortbed. on my longbed it was at the back of the cab, easily accessible with the bed off. it made changing the bushings much easier.

ChevyDude · 06-08-2006, 05:08 PM

Well cool...this really is the "Learning channel" for us all, isn't it!!! Where is the best place to buy quailty Trailering Arm bushings??? Anyone know?

matthufham · 06-08-2006, 06:12 PM

i used energy suspension polyurethane from lmc truck. the hardest part of installing them was removing the original rubber ones. we used a torch and burned out the old ones.

ChevyDude · 06-10-2006, 12:32 AM

Well got to taking the trailering arms off, rust and bushing removal. Going to take everything apart, paint it all up and put er' back together. Poly Trailering bushing were ordered today. Like I read in the previous post, I had to take a torch to the old rubber bushing and melted them out! Great idea!!!

garyj36 · 06-10-2006, 12:36 AM

Sweet

Longhorn Man · 06-10-2006, 06:02 AM

looking totally sweet.

I know I'm not one to correct anyone's spelling/grammer/word useage... but I have to;
Tehy are trailing arms... not trailering.

ChevyDude · 06-10-2006, 09:46 AM

Thanks again guys. Trailering arm seam that runs down the entire middle appears to be where all the dirt, grime, and water can collect so I filled it with paintedable 35 acylic latex caulk. They always told me if ya find a crack, fill it with caulk...LOL! In all seriousness, the caulk should keep the water and grime from getting between the trailering arm.

ChevyDude · 06-10-2006, 07:10 PM

Quote:

Originally Posted by Longhorn Man

I know I'm not one to correct anyone's spelling/grammer/word useage... but I have to;
Tehy are trailing arms... not trailering.

Thanks Andy! ahhhh it is Andy right??? or is that Andie??? Maybe it's not Andy at all??? My spelling sux!

Kurt L · 06-10-2006, 09:44 PM

good looking truck you have great work also.i've got a question where did you get those chrome vette wheels at? i would love a set of those.

TugOwar · 06-10-2006, 09:47 PM

Looking good dude! How did you protect the cab during the rear frame clean up? just curious.

06-06-2006, 11:12 PM	#1
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	bed off....Pics! I got ambitious with all the tools sitting here to yank the bed, so I got after it and here it is. Threw a chain in the rafters attached a 2 ton "come along" to the rafters and put four motorcycle tie downs from the four stake pockets. Got them as tight as I could and hooked the come along to the center and started cranking. Rolled the truck out from under and set the bed back down on six tires. It worked without any mishap whatsoever. On to installing the fuel cell. In the last pic you can get an idea of the rake of the suspension, I'm digging it! Attached Images

06-06-2006, 11:13 PM	#2
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: bed off....Pics! last two...for now. Attached Images

06-06-2006, 11:34 PM	#3
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: bed off....Pics! Congrats. Progress is fun! I used a backhoe to pull the bed off my son's truck. What are your plans for the fuel filler? I just got a blazer door and filler from Jose to do the sidemarker fill door. Good luck and great pics. Al __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

06-07-2006, 12:03 AM	#4
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: bed off....Pics! Haven't fully decided on the fill location. I have a Fuelcellguy 18 gallon aluminum tank that will go in, in the next couple of days after the frame is oven cleaner soaked, blasted, cleaned and painted. I don't think I am going to do the sidemarker fill door...something a lil' diff. Last edited by ChevyDude; 06-07-2006 at 12:03 AM.

06-07-2006, 12:15 AM	#5
Oldtruckfanatic Truck junkie Join Date: May 2006 Location: Reno NV Posts: 697	Re: bed off....Pics! Ok now you're just showin off. first the super clean engine and paint pics and now the bed off pics... I'm gonna have to go out and do something so I don't feel so lazy. All kidding aside thats going to be a really really nice ride.

06-07-2006, 12:33 AM	#6
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: bed off....Pics! LOL!!! I drank beer all last summer and blew off working on my truck....I'm not kidding. This summer I said no beer and get to working to this truck. So that's what I'm doing every min I'm not doing my real job. Thanks for the nice comment.

06-07-2006, 12:38 AM	#7
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: bed off....Pics! Holy cow... NO BEER? Dude, that aint healthy! Nice ride, looks really nice. __________________ RIP El Jay! Love you brother! Last edited by Jerry Jones; 06-07-2006 at 12:38 AM.

06-07-2006, 07:18 AM	#8
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: bed off....Pics! Nice work, and Nice GUN SAFE!!!!!!!!!!!! __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

06-07-2006, 09:29 AM	#10
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: bed off....Pics! Nice work! That trucks looks sweet to start with and the frame is pretty nice as well. __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

06-07-2006, 10:22 AM	#11
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: bed off....Pics! Thanks Guys! Am I doing this resto ASS Backwards or what ??? Cleaning up the frame after the truck has been painted ??? Why the flock did I not do the frame when I was painting the truck ??? What happened was... I was doing a resto on my 72' K-10 which was my daily driver, so I needed a second truck to drive while doing the resto on the K-10. I found this lil' 71' C-10 down in Colorado Springs which was very clean and driveable. It was all extremely straight but was in primer so I took it to get painted. The painter tells me this 71' is too nice and straight to do a crap paint job, and convinces me to let him take it apart for paint some really nice paint. I agree. So he took the entire truck apart and did an awesome paint job on this lil' 71' that was supposed to be my "driver" while I did the K-10 resto. So I get the 71' C-10 back from the painter 9 months after I took it to him, but he flaked and didn't put it all back together. My wife said "Pick one truck and do the one truck right". Since the paint was so awesome I decided to keep the 71' C-10 and put it back together the best I could. So.....this is why it seems that I am doing this truck ASS Backwards. Oh well. I haven't told the wife yet that I need to order one of those ZZ383 motors yet for this Lil' Red truck, LOL! Here she is when I bought her: Attached Images Last edited by ChevyDude; 06-07-2006 at 06:14 PM.

06-07-2006, 06:43 PM	#12
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: bed off....Pics! Today I got the truck 180'ed and ground & punched the rivets of the two rear cross braces where the fuel tank will go. She is now sitting with 3 cans of oven cleaner a soakin'. 18 gallon Fuelcellguy tank to be fitted after clean and paint. Gots to go to "real" work now...hasta!!! Don't look at the Mopar flags....that was when I owned a Prowler...sold the Prowler for one of these trucks!!! Attached Images Last edited by ChevyDude; 06-07-2006 at 06:45 PM.

06-07-2006, 07:43 PM	#14
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: bed off....Pics! Cool idea, a cherry picker & motorcycle straps work good too. Nice looking truck BTW...

06-08-2006, 04:36 PM	#15
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: bed off....Pics! Ok , 3 cans of oven cleaner have been soaking for 24 hrs or so. Got out my 2200 lbs pressure washer and started blasting. Going to do one more oven cleaner soak tonight and blast again tomorrow. The freak in me cannot just paint it together, I'm going to take it apart and change the trailering arms bushing and do it right. The little spots are rain drops. It started to rain after I had blasted it and it wa drying. Attached Images

06-08-2006, 04:53 PM	#16
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: bed off....Pics! hmm i just learned the trailing arm crossmember is under the cab on a shortbed. on my longbed it was at the back of the cab, easily accessible with the bed off. it made changing the bushings much easier.

06-08-2006, 05:08 PM	#17
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: bed off....Pics! Well cool...this really is the "Learning channel" for us all, isn't it!!! Where is the best place to buy quailty Trailering Arm bushings??? Anyone know? Last edited by ChevyDude; 06-08-2006 at 05:09 PM.



Register or Log In To remove these advertisements.

06-08-2006, 06:12 PM	#18
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: bed off....Pics! i used energy suspension polyurethane from lmc truck. the hardest part of installing them was removing the original rubber ones. we used a torch and burned out the old ones. Last edited by matthufham; 06-08-2006 at 06:13 PM.

06-10-2006, 12:32 AM	#19
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: bed off....Pics! Well got to taking the trailering arms off, rust and bushing removal. Going to take everything apart, paint it all up and put er' back together. Poly Trailering bushing were ordered today. Like I read in the previous post, I had to take a torch to the old rubber bushing and melted them out! Great idea!!! Attached Images Last edited by ChevyDude; 06-10-2006 at 07:08 PM.

06-10-2006, 12:36 AM	#20
garyj36 Registered User Join Date: Mar 2005 Posts: 17	Re: bed off....Pics! Sweet

06-10-2006, 06:02 AM	#21
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: bed off....Pics! looking totally sweet. I know I'm not one to correct anyone's spelling/grammer/word useage... but I have to; Tehy are trailing arms... not trailering.

06-10-2006, 09:46 AM	#22
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: bed off....Pics! Thanks again guys. Trailering arm seam that runs down the entire middle appears to be where all the dirt, grime, and water can collect so I filled it with paintedable 35 acylic latex caulk. They always told me if ya find a crack, fill it with caulk...LOL! In all seriousness, the caulk should keep the water and grime from getting between the trailering arm.

06-10-2006, 09:44 PM	#24
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: bed off....Pics! good looking truck you have great work also.i've got a question where did you get those chrome vette wheels at? i would love a set of those.

06-10-2006, 09:47 PM	#25
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	Re: bed off....Pics! Looking good dude! How did you protect the cab during the rear frame clean up? just curious.

Register or Log In To remove these advertisements.