So....What You Get Done This Weekend? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 06-11-2006, 10:52 PM

No pictures yet, I goofed and forgot the camera. Saturday I did errands and took the family to see Cars. Saturday evening I finished up welding my firewall areas up on the 70. Got the patches for the floor ready to cut out and weld in where the floor shifter was. Today I shot the BS with board member EdB and picked up a new pressure wsher for the shop. I guess I'll assemble it tomorrow after work. Most of the evening was messing around with my son playing with his hot wheels and wathcing Hot Wheels movies while we raced each other.

So how's your weekend activities??

jugernot · 06-11-2006, 10:59 PM

Well it took me most of the morning, but I moved everything out of my garage, reorganized it, sweep the two years worth of dust and dirt out. All so my wife could put her car on one side of the garage. Guess what she did??????? Parked in the driveway. Thanks Honey.............

70c10 · 06-11-2006, 11:01 PM

My accomplishment was actually getting the truck out for the first time this year to drive

. I drove about 75 miles and enjoyed every minute!

greasemonkey · 06-11-2006, 11:31 PM

Degreased and powerwashed the underside of the '88 Trooper- for 2 hours- on my back- in nasty black water that was pouring out. I guess after 180k miles the grime builds up pretty good. Time to get it undercoated again.

**Ron 586** · 06-11-2006, 11:55 PM

Still nothing to report. Can't leave the house except to go to physical therapy and doctors visit. Have appointment with doctor on Wed. and hope to get started on getting my problems fixed. On a good note I watched my drag racing hero win funny car today. !st win of the year for old John. Will check in later.

TugOwar · 06-11-2006, 11:58 PM

Rest. Even though I returned to work last week I'm still nursing a broken arm. I'm glad to be back to work but it's physically exhausting after being out for a month. So, I rested. Did manage to repair the front steps today though.

Rokcrln · 06-12-2006, 12:28 AM

Well lets see I finished the front rocker replacement, patched the kick panel, finished welding up the new passenger side post/jamb, patched the sun visor area that was cut out for post replacement, created a decent door gap on the third door, built 3' of rain gutter on the pass side and shaved the fire wall. Other than that not a whole lot.

Kevin
LFD Inc.

stllookn · 06-12-2006, 12:32 AM

Got the frame sprayed in DP90, assembled the bed and dropped it on the frame....whooo hoooo! I know it is only primer but it is going to run the summer that way! Drove the Longhorn to the auto parts and hardware store for every bolt I needed...now that was fun!

ChevyDude · 06-12-2006, 02:17 AM

Got the differential detatched from the frame a little paint work. Here's the link that shows all this weekends work >

http://67-72chevytrucks.com/vboard/s...=201776&page=2

va_tlc · 06-12-2006, 03:42 AM

lookin great chevy dude, we took out most of the bed floor bolts this weekend, gonna replace the bottom with a better one i have, gonna be time consuming considering the bed is already been painted,,,,yall take care

Southedisto · 06-12-2006, 05:46 AM

I got my motor running!!! Sounds so good!!
http://67-72chevytrucks.com/vboard/s...=186247&page=2

JRB · 06-12-2006, 11:42 AM

I drained the gas tank in my 67. I tried to siphen it out but I couldnt take the smell or the fumes off the 10 year old gas. I almost puked in my wifes flower bed. So I unhooked the fuel pump from the carb. I then took off the line and put it in a 5 gallon bucket and started turning the motor over and it started pumping the gas into the bucket. What I noticed is that when I stopped cranking the motor the gas was still flowing and it flowed the rest of the day until the gas was completely drained. Learn something new all the time. I also found out that the tires on the rear of the truck were rusted on and had to beat them off with a 3lb sledge. I need some new rims now. Oh well there cheap.
JRB

hd78glide · 06-12-2006, 11:46 AM

Removed the gas tank and then 5 hours to cut out the drivers sid rocker, floor and front cab support. Just a little more trimming to put in the new floor.

Lippyp · 06-12-2006, 12:01 PM

Found some more rust when I removed the rest of the passenger side rocker so I ordered a pair of front pillar patch panels from Wes at Classic Heartbeat, test fitted my new rear pipes for the exhaust and today took em back in and got then front ends stretched a little so they will fit on the boxes and got the stainless steel tips welded on in the right place, thats 2 1/2" mild stell with 3" slash cut stainless tips with the ends rolled inwards coming out just in front of the rear wheels.

Rust:

New pipes:

**FRENCHBLUE72** · 06-12-2006, 12:21 PM

I got nothing done and I had a 3 day weekend I sliced the bottom of my foot open thrusday night and can barley walk.... woo hooo..

67ChevyRedneck · 06-12-2006, 01:47 PM

I started stripping my rear fenders (front and back) along with the "steps." I almost think my DS fender is too beat up to use... oh well, it's already got the fuel filller door in it and I'm not about to swap it out now.....someday I'll buy some new repops....someday.....

mocwon · 06-12-2006, 02:02 PM

Bought a tile saw and started cutting the slate tile for the front porch.

oj70chevy · 06-12-2006, 02:35 PM

Well my weekend started Friday with a little

then ended like this

I'm just glad I didn’t go out like this

. Saturday was spent recovering at my company picnic, I think I got a little sicker from all the VP's and managers with there

and

. It made me want to

and just tell them

. Sunday was a little better. I spent the afternoon looking for a new digital camera but could not decide on the Sony cyber-shot DSC-H2 6mp or the DSC-H5 7.2mp. What do you fine folks out there think.

PS. sorry but just had to vent a little bit.

67Fleet · 06-12-2006, 04:34 PM

I cleaned about 10lbs of crud off the bottom of my truck, scraped and cleaned all the crossmembers, frame, etc. getting it ready to put the POR15 on it and cleaned up some before I take the bed off. I have my ECE C-notch and super track bar coming this week and need to get those items on next weekend. Oh, I also changed oil/filter and tried to chase down a phantom oil leak that appears to be my rear main seal. fun fun fun....

lpaine · 06-12-2006, 06:02 PM

The wife and I took a long drive (about 400 miles round trip) to pick up a short fleet box, loaded it on the back of my pickup-should have taken it apart, but oh well.Got it home o.k., took it apart today. The floor and wheel wells are shot, but the sides look pretty good, in primer but all there. I'm happy, especially for $100! I'll try and post pic's soon.

Legend56BC · 06-13-2006, 12:07 AM

I got rubbed real good sat night racing and finished 11th still about 500lbs over weight compared to the other street stockers

they are cars I'm a truck)

06-11-2006, 10:52 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,818	So....What You Get Done This Weekend? No pictures yet, I goofed and forgot the camera. Saturday I did errands and took the family to see Cars. Saturday evening I finished up welding my firewall areas up on the 70. Got the patches for the floor ready to cut out and weld in where the floor shifter was. Today I shot the BS with board member EdB and picked up a new pressure wsher for the shop. I guess I'll assemble it tomorrow after work. Most of the evening was messing around with my son playing with his hot wheels and wathcing Hot Wheels movies while we raced each other. So how's your weekend activities?? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-11-2006, 10:59 PM	#2
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: So....What You Get Done This Weekend? Well it took me most of the morning, but I moved everything out of my garage, reorganized it, sweep the two years worth of dust and dirt out. All so my wife could put her car on one side of the garage. Guess what she did??????? Parked in the driveway. Thanks Honey............. __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

06-11-2006, 11:01 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: So....What You Get Done This Weekend? My accomplishment was actually getting the truck out for the first time this year to drive . I drove about 75 miles and enjoyed every minute! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

06-11-2006, 11:31 PM	#4
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	Re: So....What You Get Done This Weekend? Degreased and powerwashed the underside of the '88 Trooper- for 2 hours- on my back- in nasty black water that was pouring out. I guess after 180k miles the grime builds up pretty good. Time to get it undercoated again. __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

06-11-2006, 11:55 PM	#5
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,166	Re: So....What You Get Done This Weekend? Still nothing to report. Can't leave the house except to go to physical therapy and doctors visit. Have appointment with doctor on Wed. and hope to get started on getting my problems fixed. On a good note I watched my drag racing hero win funny car today. !st win of the year for old John. Will check in later. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

06-11-2006, 11:58 PM	#6
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	Re: So....What You Get Done This Weekend? Rest. Even though I returned to work last week I'm still nursing a broken arm. I'm glad to be back to work but it's physically exhausting after being out for a month. So, I rested. Did manage to repair the front steps today though. Last edited by TugOwar; 06-11-2006 at 11:59 PM.

06-12-2006, 12:28 AM	#7
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: So....What You Get Done This Weekend? Well lets see I finished the front rocker replacement, patched the kick panel, finished welding up the new passenger side post/jamb, patched the sun visor area that was cut out for post replacement, created a decent door gap on the third door, built 3' of rain gutter on the pass side and shaved the fire wall. Other than that not a whole lot. Kevin LFD Inc. Attached Images

06-12-2006, 12:32 AM	#8
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: So....What You Get Done This Weekend? Got the frame sprayed in DP90, assembled the bed and dropped it on the frame....whooo hoooo! I know it is only primer but it is going to run the summer that way! Drove the Longhorn to the auto parts and hardware store for every bolt I needed...now that was fun! Attached Images __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

06-12-2006, 02:17 AM	#9
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: So....What You Get Done This Weekend? Got the differential detatched from the frame a little paint work. Here's the link that shows all this weekends work > http://67-72chevytrucks.com/vboard/s...=201776&page=2 Attached Images

06-12-2006, 03:42 AM	#10
va_tlc Registered User Join Date: Nov 2005 Location: VIRGINIA Posts: 905	Re: So....What You Get Done This Weekend? lookin great chevy dude, we took out most of the bed floor bolts this weekend, gonna replace the bottom with a better one i have, gonna be time consuming considering the bed is already been painted,,,,yall take care

06-12-2006, 05:46 AM	#11
Southedisto River life...... Join Date: Oct 2005 Location: Orangeburg SC Posts: 1,078	Re: So....What You Get Done This Weekend? I got my motor running!!! Sounds so good!! http://67-72chevytrucks.com/vboard/s...=186247&page=2 __________________ I like wheelin in Dixie!

06-12-2006, 11:42 AM	#12
JRB Senior Member Join Date: Nov 2005 Location: Portland Oregon Posts: 287	Re: So....What You Get Done This Weekend? I drained the gas tank in my 67. I tried to siphen it out but I couldnt take the smell or the fumes off the 10 year old gas. I almost puked in my wifes flower bed. So I unhooked the fuel pump from the carb. I then took off the line and put it in a 5 gallon bucket and started turning the motor over and it started pumping the gas into the bucket. What I noticed is that when I stopped cranking the motor the gas was still flowing and it flowed the rest of the day until the gas was completely drained. Learn something new all the time. I also found out that the tires on the rear of the truck were rusted on and had to beat them off with a 3lb sledge. I need some new rims now. Oh well there cheap. JRB

06-12-2006, 11:46 AM	#13
hd78glide Registered User Join Date: May 2006 Location: Winnipeg Canada Posts: 88	Re: So....What You Get Done This Weekend? Removed the gas tank and then 5 hours to cut out the drivers sid rocker, floor and front cab support. Just a little more trimming to put in the new floor. __________________ 1967 GMC 1/2 ton 1972 GMC Sierra 1975 Chev 5/4 ton 1978 1/2 Harley FLH 1998 K1500 diesel

06-12-2006, 12:01 PM	#14
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	Re: So....What You Get Done This Weekend? Found some more rust when I removed the rest of the passenger side rocker so I ordered a pair of front pillar patch panels from Wes at Classic Heartbeat, test fitted my new rear pipes for the exhaust and today took em back in and got then front ends stretched a little so they will fit on the boxes and got the stainless steel tips welded on in the right place, thats 2 1/2" mild stell with 3" slash cut stainless tips with the ends rolled inwards coming out just in front of the rear wheels. Rust: New pipes: __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission Last edited by Lippyp; 06-12-2006 at 12:02 PM.

06-12-2006, 12:21 PM	#15
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: So....What You Get Done This Weekend? I got nothing done and I had a 3 day weekend I sliced the bottom of my foot open thrusday night and can barley walk.... woo hooo.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

06-12-2006, 01:47 PM	#16
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: So....What You Get Done This Weekend? I started stripping my rear fenders (front and back) along with the "steps." I almost think my DS fender is too beat up to use... oh well, it's already got the fuel filller door in it and I'm not about to swap it out now.....someday I'll buy some new repops....someday..... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

06-12-2006, 02:02 PM	#17
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Re: So....What You Get Done This Weekend? Bought a tile saw and started cutting the slate tile for the front porch. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

06-12-2006, 02:35 PM	#18
oj70chevy 250 V-6 Club Join Date: Feb 2005 Location: San antonio, TX. Posts: 898	Re: So....What You Get Done This Weekend? Well my weekend started Friday with a little then ended like this I'm just glad I didn’t go out like this . Saturday was spent recovering at my company picnic, I think I got a little sicker from all the VP's and managers with there and . It made me want to and just tell them . Sunday was a little better. I spent the afternoon looking for a new digital camera but could not decide on the Sony cyber-shot DSC-H2 6mp or the DSC-H5 7.2mp. What do you fine folks out there think. PS. sorry but just had to vent a little bit. __________________ 1970 Chevy C/10 6 Cyl. 43k original miles all factory .http://67-72chevytrucks.com/vboard/s...d.php?t=197523 Never ask a stupid question unless you want a stupid answer .

06-12-2006, 04:34 PM	#19
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: So....What You Get Done This Weekend? I cleaned about 10lbs of crud off the bottom of my truck, scraped and cleaned all the crossmembers, frame, etc. getting it ready to put the POR15 on it and cleaned up some before I take the bed off. I have my ECE C-notch and super track bar coming this week and need to get those items on next weekend. Oh, I also changed oil/filter and tried to chase down a phantom oil leak that appears to be my rear main seal. fun fun fun.... __________________ -Bret 67 short-fleet sold!

06-12-2006, 06:02 PM	#20
lpaine Registered User Join Date: Oct 2002 Location: Parksville, B.C. Canada Posts: 637	Re: So....What You Get Done This Weekend? The wife and I took a long drive (about 400 miles round trip) to pick up a short fleet box, loaded it on the back of my pickup-should have taken it apart, but oh well.Got it home o.k., took it apart today. The floor and wheel wells are shot, but the sides look pretty good, in primer but all there. I'm happy, especially for $100! I'll try and post pic's soon. __________________ 1969 G.M.C 3/4 Ton 920 (Canadian Version) 307 3 speed, currently apart 1998 Chevy 1/2 ton ex cab V-6 5 speed 1967 Chevy SWB - project truck; not started just yet

06-13-2006, 12:07 AM	#21
Legend56BC Registered User Join Date: Oct 2001 Location: Aldergrove BC(Vancouver area) Canada Posts: 312	Re: So....What You Get Done This Weekend? I got rubbed real good sat night racing and finished 11th still about 500lbs over weight compared to the other street stockers they are cars I'm a truck) __________________ http://www.facebook.com/MacDonaldRac...ckTeamBcCanada

Register or Log In To remove these advertisements.