67 stepside bed in Oklahoma - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rauto13 · 06-12-2006, 11:15 PM

bed is sold - contact RicksTrucks for fenders

Thanks

rauto13 · 06-12-2006, 11:18 PM

mope pics

rauto13 · 06-12-2006, 11:19 PM

last of the pics

RicksTrucks · 06-13-2006, 12:25 AM

I am more interested in the box than the fenders. Can you tell me the bad spots in the box sides, end and tailgate - bad being rust throughs. And can you PM me your address so I can come and look at it. Also, anything you need that I could trade with cash.

rauto13 · 06-13-2006, 12:27 AM

as far as I know, there is no rust through on the box, steps, fenders, or the tailgate.

sending PM

oh, and the only thing I am really looking for right now is a good Muncie four speed for my Camaro. Not looking real hard for that, kinda need the $$$ to get some projects moving forward

blades176 · 06-13-2006, 11:52 PM

I have a muncie trans thats been gone through about 10 years ago and have never used it. I believe its the 252 low. Its got the two grooves on the shaft. I was just thing of putting it in ebay to start at around 500 bucks.

AL

rauto13 · 06-15-2006, 12:25 PM

still for sale, I don't need a 4 speed anymore, would be interested in steel bellhousing out of big truck for standard tranny, I think they came with 366 big block or larger

RicksTrucks · 06-15-2006, 12:33 PM

This is on a 72 one ton with a 4 speed Saginaw, not sure what the engine size was but was probably a BB. Forgive my ignorance, but is this the bell housing or just part of the transmission?

rauto13 · 06-16-2006, 12:29 PM

ttt

rauto13 · 06-17-2006, 12:00 PM

I need this gone by next Saturday, a week from today. I am willing to negotiate, I need the bellhousing that RicksTrucks has and also a set of chrome or stainless headlight doors and grille trim for a 67.

PM me, lets make a deal.

I really need this gone this week, truck going to the shop next Saturday and I have nowhere to store this bed.

blades176 · 06-17-2006, 03:18 PM

I am looking for the same parts for my 13 year old daughter's we are building myself. Other than the four speed muncie I have to trade, I have a brand new set of 327 standard bore, 11 to 1 compression pistons. I gave my best friend all the big block stuff I had (402 incher with 12.5 to 1, steel crank, plus two more steel cranks and a L88 427 block) for a 305 with tranny for my daughter's truck. Oh well, good luck on getting the chrome stuff!

AL

rauto13 · 06-18-2006, 11:57 PM

anyone need this bed?

Voodooracer · 06-19-2006, 07:41 AM

Interested in the tailgate and the pass rear fender. Problem is to far to drive right now. In Houston Texas. Wouldn't be interested in seperating and shipping?

**special-K** · 06-19-2006, 12:28 PM

I`d buy it,if we had a way,like a member traveling from OK to the east,or part way to the S/E or Mid-Atlantic.I`m making a trip to the Florida Panhandle in July.

rauto13 · 06-19-2006, 06:46 PM

Quote:

Originally Posted by Voodooracer

Interested in the tailgate and the pass rear fender. Problem is to far to drive right now. In Houston Texas. Wouldn't be interested in seperating and shipping?

Actually RicksTrucks & I are trying to get together to on the bed & gate without fenders. If I can make a deal on the bed with him, the fenders will be for sale seperately. He is wanting the tailgate. If I decide to part it out, your first for the rt fender. I will post price when I decide to part out.

Voodooracer · 06-20-2006, 07:19 AM

Thanx!!!!!

**special-K** · 06-20-2006, 01:34 PM

I`d be interested in the left fender if parting.

rauto13 · 06-20-2006, 06:03 PM

Quote:

Originally Posted by special-K

I`d be interested in the left fender if parting.

If I part it, you're first for the left fender. Should know soon.

Thanks

rauto13 · 06-22-2006, 12:10 PM

sale is pending to RicksTrucks on bed & tailgate without fenders.

Voodooracer & special-K are first in line for step fenders

It will be middle of next week before we can get together on bed, will update after that.

Thanks

**special-K** · 06-22-2006, 01:45 PM

Ok,thanks.

blades176 · 06-23-2006, 11:15 AM

Whats the chance you having the complete bed around mid next month?

rauto13 · 06-23-2006, 01:59 PM

Quote:

Originally Posted by blades176

Whats the chance you having the complete bed around mid next month?

Sale is pending on bed at this time, I will not know until middle of next week if sale goes through. I will update this after I know for sure that bed is sold.

Voodooracer · 06-23-2006, 10:53 PM

Thanx.

rauto13 · 07-01-2006, 06:30 PM

quick update, bed is sold to RicksTrucks, he will be selling the fenders

RicksTrucks · 07-02-2006, 01:26 AM

Here is the link to the fenders for sale.

http://67-72chevytrucks.com/vboard/s...92#post1746592

06-12-2006, 11:15 PM	#1
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	67 stepside bed in Oklahoma bed is sold - contact RicksTrucks for fenders Thanks Attached Images __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab Last edited by rauto13; 07-01-2006 at 06:31 PM.

06-12-2006, 11:18 PM	#2
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: 67 stepside bed in Oklahoma mope pics Attached Images __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

06-12-2006, 11:19 PM	#3
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: 67 stepside bed in Oklahoma last of the pics Attached Images __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

06-13-2006, 12:25 AM	#4
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: 67 stepside bed in Oklahoma I am more interested in the box than the fenders. Can you tell me the bad spots in the box sides, end and tailgate - bad being rust throughs. And can you PM me your address so I can come and look at it. Also, anything you need that I could trade with cash. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

06-13-2006, 12:27 AM	#5
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: 67 stepside bed in Oklahoma as far as I know, there is no rust through on the box, steps, fenders, or the tailgate. sending PM oh, and the only thing I am really looking for right now is a good Muncie four speed for my Camaro. Not looking real hard for that, kinda need the $$$ to get some projects moving forward __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab Last edited by rauto13; 06-13-2006 at 12:39 AM.

06-13-2006, 11:52 PM	#6
blades176 Registered User Join Date: Mar 2006 Location: Irving, Texas Posts: 27	Re: 67 stepside bed in Oklahoma I have a muncie trans thats been gone through about 10 years ago and have never used it. I believe its the 252 low. Its got the two grooves on the shaft. I was just thing of putting it in ebay to start at around 500 bucks. AL

06-15-2006, 12:25 PM	#7
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: 67 stepside bed in Oklahoma still for sale, I don't need a 4 speed anymore, would be interested in steel bellhousing out of big truck for standard tranny, I think they came with 366 big block or larger __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

06-15-2006, 12:33 PM	#8
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: 67 stepside bed in Oklahoma This is on a 72 one ton with a 4 speed Saginaw, not sure what the engine size was but was probably a BB. Forgive my ignorance, but is this the bell housing or just part of the transmission? Attached Images __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4 Last edited by RicksTrucks; 06-15-2006 at 12:34 PM.

06-16-2006, 12:29 PM	#9
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: 67 stepside bed in Oklahoma ttt __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

06-17-2006, 12:00 PM	#10
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: 67 stepside bed in Oklahoma I need this gone by next Saturday, a week from today. I am willing to negotiate, I need the bellhousing that RicksTrucks has and also a set of chrome or stainless headlight doors and grille trim for a 67. PM me, lets make a deal. I really need this gone this week, truck going to the shop next Saturday and I have nowhere to store this bed. __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

06-17-2006, 03:18 PM	#11
blades176 Registered User Join Date: Mar 2006 Location: Irving, Texas Posts: 27	Re: 67 stepside bed in Oklahoma I am looking for the same parts for my 13 year old daughter's we are building myself. Other than the four speed muncie I have to trade, I have a brand new set of 327 standard bore, 11 to 1 compression pistons. I gave my best friend all the big block stuff I had (402 incher with 12.5 to 1, steel crank, plus two more steel cranks and a L88 427 block) for a 305 with tranny for my daughter's truck. Oh well, good luck on getting the chrome stuff! AL

06-18-2006, 11:57 PM	#12
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: 67 stepside bed in Oklahoma anyone need this bed? __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

06-19-2006, 07:41 AM	#13
Voodooracer Registered User Join Date: Feb 2006 Location: Houston, Texas Posts: 32	Re: 67 stepside bed in Oklahoma Interested in the tailgate and the pass rear fender. Problem is to far to drive right now. In Houston Texas. Wouldn't be interested in seperating and shipping?

06-19-2006, 12:28 PM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67 stepside bed in Oklahoma I`d buy it,if we had a way,like a member traveling from OK to the east,or part way to the S/E or Mid-Atlantic.I`m making a trip to the Florida Panhandle in July. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-20-2006, 07:19 AM	#16
Voodooracer Registered User Join Date: Feb 2006 Location: Houston, Texas Posts: 32	Re: 67 stepside bed in Oklahoma Thanx!!!!!



Register or Log In To remove these advertisements.

06-20-2006, 01:34 PM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67 stepside bed in Oklahoma I`d be interested in the left fender if parting. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-22-2006, 12:10 PM	#19
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: 67 stepside bed in Oklahoma sale is pending to RicksTrucks on bed & tailgate without fenders. Voodooracer & special-K are first in line for step fenders It will be middle of next week before we can get together on bed, will update after that. Thanks __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

06-22-2006, 01:45 PM	#20
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 67 stepside bed in Oklahoma Ok,thanks. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-23-2006, 11:15 AM	#21
blades176 Registered User Join Date: Mar 2006 Location: Irving, Texas Posts: 27	Re: 67 stepside bed in Oklahoma Whats the chance you having the complete bed around mid next month?

06-23-2006, 10:53 PM	#23
Voodooracer Registered User Join Date: Feb 2006 Location: Houston, Texas Posts: 32	Re: 67 stepside bed in Oklahoma Thanx.

07-01-2006, 06:30 PM	#24
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: 67 stepside bed in Oklahoma quick update, bed is sold to RicksTrucks, he will be selling the fenders __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

07-02-2006, 01:26 AM	#25
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: 67 stepside bed in Oklahoma Here is the link to the fenders for sale. http://67-72chevytrucks.com/vboard/s...92#post1746592 __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

Register or Log In To remove these advertisements.