BOM location on a Dana 60 or 70

[invno1]

Hey guys,

I'm sure this has been asked before many times, but i'm gonna ask anyway.

I'm trying to find the BOM on the rear axle(s) I have here. I'm not sure if they are Dana 60s or 70s. One is out of a 91 3+3 quad cab, and the other out of an 80 or 81 reg cab diesel dually.

I thought they would be in the same relative location (on the right hand side tube of the diff while looking at the diff cover) as the front 60 but I have not been able to find them. The only numbers I found on the right side tube where HHW 61063 and KMU 02532 (or something close to that can't recall exactly.

Any help would be great.

Thanks.

[invno1]

Correction. Sorry guys, I just realized that the axles are not Dana's but rather GM Corporate 14 bolts. So maybe those numbers will make more sense.

Thanks again.

[magnethead]

Originally Posted by invno1

Correction. Sorry guys, I just realized that the axles are not Dana's but rather GM Corporate 14 bolts. So maybe those numbers will make more sense.

Thanks again.

woulda thought you'd have noticed that off the bat with the removable pinion bearing plate?