67-72 parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1967k30 · 06-27-2006, 06:17 PM

I have some extra parts I need to sell.
BBC 402 Ran when pulled,could use re-build $375obo
SBC 283 complete with everything. Runs good,has been rebuilt but don't know how many miles ago. Has a tick in it. $150obo
Will ship at buyers expence and arrangement

2 68-72 Bed's. Both in decent shape. One need a floor. Sides are good with minor dents/dings. $200obo each

70' Cab,Rust free,non-A/C $300obo without doors $500 with doors
Local pickup or possible delivery with reasonable distance for $$$$.

67' only 4spd front driveshaft. Like new $150 good for up to 4" of lift.
Will ship at buyers expence via UPS or similar shipper.
No pic's yet but will try to soon. I don't have a camera yet

.

dirtball · 06-27-2006, 07:07 PM

Quote:

Originally Posted by 1967k30

I have some extra parts I need to sell.

2 68-72 Bed's. Both in decent shape. One need a floor. Sides are good with minor dents/dings. $250obo each

If one of the beds is a SWB(fat chance right?), am VERY interested.

shelby987 · 06-27-2006, 08:10 PM

1967K30.......WHY do you seem to have everything I am looking for, at a price I can afford.....but you are in NEBRASKA! (not cool!)

here's a ttt for you...

1967k30 · 06-27-2006, 08:59 PM

Dirtball: Unfortunately not. I did see some idiot in Denver that had made one into a trailer and was pulling it around.I was a little ****** to see it going to waste.

Shelby987: I have had almost everything I have ever seen you look for. Just make a road trip with a trailer. I'd even make a better package deal on multiple parts.

1967k30 · 07-14-2006, 10:07 AM

Anyone want this stuff? I'm open to all offers. I want this stuff gone.

bballmac42 · 07-14-2006, 01:38 PM

I take it the beds are long beds? if so could i get a pic of the one that doesnt need a floor?i am in need of a bed......badly

**70STOVEBOLT** · 07-14-2006, 02:50 PM

What shape is the cab in? Get a camera yet?

1967k30 · 07-20-2006, 02:01 PM

bballmac42: Yes they are long beds. I have some parts to sell,hopefully this weekend,then I'll get a camera.

70Stovebolt: The cab is almost perfect,but the drivers floor was pushed up a little from the front tire hitting in a front end hit. Cab is rust free as best as I can tell and had been restored right before the hit. Camera in in the works. I'll try to get it asap.

bucket · 07-20-2006, 02:31 PM

i am interested in the cab too. pics please.

Cochise · 07-31-2006, 12:17 AM

Big Block run WELL when pulled,or just ran.

jeremy zander · 08-01-2006, 07:52 AM

looking for cab and bed!! where in NB are you located.

1967k30 · 08-13-2006, 05:15 PM

Sorry for not responding quicker. I have forgotten about this stuff

. I'll go get the cab this week and try to get pic's. It's at my cousins body shop. I bought it for the doors and never picked it up. The doors may be for sale but haven't decided yet.

I'm near Gordon which is on Highway 20.

The 402 ran. I got it from a friend in a trade.
Prices updated.

WyoRoadDog · 08-13-2006, 07:32 PM

Might be interested in one of the beds, just looking for a good bed side, so it shouldn't matter which. I'd like to see some pics, if you get them. I'll have to see what my work schedule is though, so busy I need a clone right now.
Ever get down Scottsbluff direction? I have some friends there, might make it easier to work something out.

1967k30 · 08-13-2006, 10:37 PM

I can do even better. I come through Cheyenne all the time on my way to CO.

WyoRoadDog · 08-14-2006, 09:58 AM

Let's talk when you get some pics, I'm mainly concerned with the DS bedside. I've been looking for a '67 so I didn't have to fill the marker light, but...
I'm not in a hurry, I'm out of town until next week at least.
Dirtball- I saw a SWB truck on the Wyoming Craigslist, no motor/tranny, I think it was a '67, for $1000. It's been on there awhile, he may be ready to deal. Even better, a link here

Solver · 08-14-2006, 03:59 PM

Would also be interested in pics of beds

jkaylor68gmc · 08-14-2006, 04:09 PM

I really need a good 67-68 grille, do you have any of these, does anybody have one of these? It does need to be in some what good shape.

wydomkr · 08-14-2006, 05:39 PM

I might be interested in the 402, how close do you get to Rapid City on your trips?

1967k30 · 08-14-2006, 08:44 PM

I just remembered my buddy has some pic's of the beds. If I can get him to get them to me asap.

JKaylor68GMC: I don't have any but check my wanted post. Randy {teeitup} has 4. I need one too.

wydomkr: I get up to Chadron from time to time. Actually I or my Dad will be there in the next day or two. Let me know and we'll work something out.

ampsyco · 08-14-2006, 09:29 PM

pictures of the cab please ???

1967k30 · 08-17-2006, 03:20 PM

My buddy can't seem to send those pic's to me so I'll post them from his Computer this weekend.

06-27-2006, 06:17 PM	#1
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	67-72 parts I have some extra parts I need to sell. BBC 402 Ran when pulled,could use re-build $375obo SBC 283 complete with everything. Runs good,has been rebuilt but don't know how many miles ago. Has a tick in it. $150obo Will ship at buyers expence and arrangement 2 68-72 Bed's. Both in decent shape. One need a floor. Sides are good with minor dents/dings. $200obo each 70' Cab,Rust free,non-A/C $300obo without doors $500 with doors Local pickup or possible delivery with reasonable distance for $$$$. 67' only 4spd front driveshaft. Like new $150 good for up to 4" of lift. Will ship at buyers expence via UPS or similar shipper. No pic's yet but will try to soon. I don't have a camera yet . __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. Last edited by 1967k30; 08-13-2006 at 05:17 PM.

06-27-2006, 08:10 PM	#3
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: 67-72 parts 1967K30.......WHY do you seem to have everything I am looking for, at a price I can afford.....but you are in NEBRASKA! (not cool!) here's a ttt for you... __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

06-27-2006, 08:59 PM	#4
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67-72 parts Dirtball: Unfortunately not. I did see some idiot in Denver that had made one into a trailer and was pulling it around.I was a little ****** to see it going to waste. Shelby987: I have had almost everything I have ever seen you look for. Just make a road trip with a trailer. I'd even make a better package deal on multiple parts. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. Last edited by 1967k30; 06-27-2006 at 09:00 PM.

07-14-2006, 10:07 AM	#5
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67-72 parts Anyone want this stuff? I'm open to all offers. I want this stuff gone. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

07-14-2006, 01:38 PM	#6
bballmac42 Registered User Join Date: Aug 2005 Location: Wisconsin Posts: 60	Re: 67-72 parts I take it the beds are long beds? if so could i get a pic of the one that doesnt need a floor?i am in need of a bed......badly

07-14-2006, 02:50 PM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,254	Re: 67-72 parts What shape is the cab in? Get a camera yet? __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

07-20-2006, 02:01 PM	#8
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67-72 parts bballmac42: Yes they are long beds. I have some parts to sell,hopefully this weekend,then I'll get a camera. 70Stovebolt: The cab is almost perfect,but the drivers floor was pushed up a little from the front tire hitting in a front end hit. Cab is rust free as best as I can tell and had been restored right before the hit. Camera in in the works. I'll try to get it asap. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

07-20-2006, 02:31 PM	#9
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: 67-72 parts i am interested in the cab too. pics please.

07-31-2006, 12:17 AM	#10
Cochise Junior Member Join Date: Apr 2006 Location: Rogers, AR Posts: 298	Re: 67-72 parts Big Block run WELL when pulled,or just ran.

08-01-2006, 07:52 AM	#11
jeremy zander Registered User Join Date: Oct 2005 Location: shakopee minnesota Posts: 515	Re: 67-72 parts looking for cab and bed!! where in NB are you located.

08-13-2006, 05:15 PM	#12
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67-72 parts Sorry for not responding quicker. I have forgotten about this stuff . I'll go get the cab this week and try to get pic's. It's at my cousins body shop. I bought it for the doors and never picked it up. The doors may be for sale but haven't decided yet. I'm near Gordon which is on Highway 20. The 402 ran. I got it from a friend in a trade. Prices updated. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

08-13-2006, 07:32 PM	#13
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: 67-72 parts Might be interested in one of the beds, just looking for a good bed side, so it shouldn't matter which. I'd like to see some pics, if you get them. I'll have to see what my work schedule is though, so busy I need a clone right now. Ever get down Scottsbluff direction? I have some friends there, might make it easier to work something out. __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS.

08-13-2006, 10:37 PM	#14
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67-72 parts I can do even better. I come through Cheyenne all the time on my way to CO. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

08-14-2006, 09:58 AM	#15
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: 67-72 parts Let's talk when you get some pics, I'm mainly concerned with the DS bedside. I've been looking for a '67 so I didn't have to fill the marker light, but... I'm not in a hurry, I'm out of town until next week at least. Dirtball- I saw a SWB truck on the Wyoming Craigslist, no motor/tranny, I think it was a '67, for $1000. It's been on there awhile, he may be ready to deal. Even better, a link here __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS. Last edited by WyoRoadDog; 08-14-2006 at 10:00 AM.

08-14-2006, 03:59 PM	#16
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Re: 67-72 parts Would also be interested in pics of beds __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon



Register or Log In To remove these advertisements.

08-14-2006, 04:09 PM	#17
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: 67-72 parts I really need a good 67-68 grille, do you have any of these, does anybody have one of these? It does need to be in some what good shape.

08-14-2006, 05:39 PM	#18
wydomkr Registered User Join Date: Mar 2006 Location: Rapid City, SD Posts: 96	Re: 67-72 parts I might be interested in the 402, how close do you get to Rapid City on your trips? __________________ Keith ------------- 1980 C-10 1981 C-30

08-14-2006, 08:44 PM	#19
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67-72 parts I just remembered my buddy has some pic's of the beds. If I can get him to get them to me asap. JKaylor68GMC: I don't have any but check my wanted post. Randy {teeitup} has 4. I need one too. wydomkr: I get up to Chadron from time to time. Actually I or my Dad will be there in the next day or two. Let me know and we'll work something out. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. Last edited by 1967k30; 08-14-2006 at 08:48 PM.

08-14-2006, 09:29 PM	#20
ampsyco Registered User Join Date: Aug 2006 Location: florida Posts: 142	Re: 67-72 parts pictures of the cab please ???

08-17-2006, 03:20 PM	#21
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	Re: 67-72 parts My buddy can't seem to send those pic's to me so I'll post them from his Computer this weekend. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

Register or Log In To remove these advertisements.