F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**w314speed** · 07-02-2006, 05:23 PM

This is a great southern (GA) 1972 almost rust free rolling chassis. It sits on a nice set of Ralley Wheels and Goodyear Wingfoot HP tires with center caps and trim rings.It is a C10 coil spring chassis with a 3:40 12 Bolt Posi. The ring and pinion is from a G-Van and makes a nice towing package.The posi has been built with new posi clutches and all new bearings. I think I had a so-so axle, needs to be checked before buttoned up for the road. THE BED is exceptional!!!! It appears that the left side bedside may have been replaced or repainted. The surface rust only appeared in the last year. The bed floor had a rubber mat and when removed has NO dents and minor surface rust marks. This bed is an strong 8 or 9. This will make a nice show truck or great driver. The truck was low mileage, garage kept and appears to have had a camper top. I am building a C20 Custom Camper, wood-floor, tool storage and auxliary fuel tank. I need the room and the money!!! $1200 Please use the thread for interest and PM for $$$$ Thanks for looking!!!!!!!!!!!!!!!!!!

QKENUF4U · 07-02-2006, 07:51 PM

dam that bed looks great on one side and not so great on the other.

if i was ever gonna do a long bed that would be an awesome platform to start with.
good luck

**special-K** · 07-03-2006, 06:47 AM

TTT,I wish,I wish.Yeah,that factory white gives up the ghost all at once.It`s no big deal what so ever,though.

blazerboy72 · 07-04-2006, 04:59 AM

You wouldnt want to sell the wheels off of it would you? I could give you another set to keep it a roller.

**w314speed** · 07-04-2006, 08:15 PM

It May Be More Interesting For Everyone To Sell The Pieces Separately. The Wheels, Tires Trim Rings And Center Caps (tires Driven 2000 Miles) $350. The Bed, The Left Bedside Will Clean-up Nicely $500. The Rolling Frame With 12 Bolt, 3:42 Posi. The Posi Has Complete Rebuild And New Bearings And Seals. May Need One Axle? $400 ( I Have A Set Of Steel Wheels And Tires To Keep Her Rolling, Rolling, Rolling!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!)

zooza1 · 07-05-2006, 04:33 AM

if you decide to sell just the posi. please put me first in line. thanks

**uncle** · 07-05-2006, 09:09 PM

What size are the tires?

roughedup72 · 07-06-2006, 11:43 AM

I'm interested in the bed and rolling chassis with the posi, You wouldnt happen to have a drivers side door the same color would you?

roughedup72 · 07-06-2006, 11:53 AM

Hell, I will trade you a complete truck with a good running 350 and th350 for the bed and rolling chassis, and you can keep the wheels. Pm me if youre interested.You can see it in the 72 trucks for sale area its listed as (72 lwb in sc)

**w314speed** · 07-06-2006, 07:54 PM

The tire size of the Gooyear Wingfoot tires is P275/60R15.

I am not interested in trading for the 72 you have for sale. Thanks for the offer. Do you still want the setup minus the wheels and tires for the $900. I do have a left door from this same truck with blue and white color combo. PM me your email address and I'll send you some pictures. It looks nice on inside and outside, but the lower door has rust and needs the lower inside and maybe the lower outer skin. My nephew did his and they worked out well. I would need $125 on the door.

**w314speed** · 07-07-2006, 06:24 PM

All items are still available!!!! ttt Thanks,

**w314speed** · 07-10-2006, 09:04 PM

ttt, ebay bound?

burban70 · 07-10-2006, 10:50 PM

Could you PM a contact number and the best time to contct you.

zooza1 · 07-11-2006, 09:26 AM

Not Interested In Just Selling The Posi?

roughedup72 · 07-11-2006, 11:06 AM

DNT DO IT!!!! I JUST NEED A LITTLE MORE TIME!!. Seriuosly if somebody wants the posi that would be cool with me because i really just want the bed and door. I dont even want the frame.

07-02-2006, 05:23 PM	#1
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI This is a great southern (GA) 1972 almost rust free rolling chassis. It sits on a nice set of Ralley Wheels and Goodyear Wingfoot HP tires with center caps and trim rings.It is a C10 coil spring chassis with a 3:40 12 Bolt Posi. The ring and pinion is from a G-Van and makes a nice towing package.The posi has been built with new posi clutches and all new bearings. I think I had a so-so axle, needs to be checked before buttoned up for the road. THE BED is exceptional!!!! It appears that the left side bedside may have been replaced or repainted. The surface rust only appeared in the last year. The bed floor had a rubber mat and when removed has NO dents and minor surface rust marks. This bed is an strong 8 or 9. This will make a nice show truck or great driver. The truck was low mileage, garage kept and appears to have had a camper top. I am building a C20 Custom Camper, wood-floor, tool storage and auxliary fuel tank. I need the room and the money!!! $1200 Please use the thread for interest and PM for $$$$ Thanks for looking!!!!!!!!!!!!!!!!!! Last edited by w314speed; 04-27-2007 at 04:23 AM.

07-02-2006, 07:51 PM	#2
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI dam that bed looks great on one side and not so great on the other. if i was ever gonna do a long bed that would be an awesome platform to start with. good luck

07-03-2006, 06:47 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI TTT,I wish,I wish.Yeah,that factory white gives up the ghost all at once.It`s no big deal what so ever,though. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-03-2006 at 06:48 AM.

07-04-2006, 04:59 AM	#4
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI You wouldnt want to sell the wheels off of it would you? I could give you another set to keep it a roller.

07-04-2006, 08:15 PM	#5
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI It May Be More Interesting For Everyone To Sell The Pieces Separately. The Wheels, Tires Trim Rings And Center Caps (tires Driven 2000 Miles) $350. The Bed, The Left Bedside Will Clean-up Nicely $500. The Rolling Frame With 12 Bolt, 3:42 Posi. The Posi Has Complete Rebuild And New Bearings And Seals. May Need One Axle? $400 ( I Have A Set Of Steel Wheels And Tires To Keep Her Rolling, Rolling, Rolling!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!) Last edited by w314speed; 07-04-2006 at 08:19 PM.

07-05-2006, 04:33 AM	#6
zooza1 Registered User Join Date: Sep 2004 Location: Linden, Tn. Posts: 232	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI if you decide to sell just the posi. please put me first in line. thanks

07-05-2006, 09:09 PM	#7
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI What size are the tires?

07-06-2006, 11:43 AM	#8
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI I'm interested in the bed and rolling chassis with the posi, You wouldnt happen to have a drivers side door the same color would you? __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod. Last edited by roughedup72; 07-06-2006 at 11:45 AM.

07-06-2006, 11:53 AM	#9
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI Hell, I will trade you a complete truck with a good running 350 and th350 for the bed and rolling chassis, and you can keep the wheels. Pm me if youre interested.You can see it in the 72 trucks for sale area its listed as (72 lwb in sc) __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

07-06-2006, 07:54 PM	#10
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI The tire size of the Gooyear Wingfoot tires is P275/60R15. I am not interested in trading for the 72 you have for sale. Thanks for the offer. Do you still want the setup minus the wheels and tires for the $900. I do have a left door from this same truck with blue and white color combo. PM me your email address and I'll send you some pictures. It looks nice on inside and outside, but the lower door has rust and needs the lower inside and maybe the lower outer skin. My nephew did his and they worked out well. I would need $125 on the door.

07-07-2006, 06:24 PM	#11
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI All items are still available!!!! ttt Thanks,

07-10-2006, 09:04 PM	#12
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,315	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI ttt, ebay bound?

07-10-2006, 10:50 PM	#13
burban70 Registered User Join Date: Nov 2005 Location: birmingham, al Posts: 39	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI Could you PM a contact number and the best time to contct you.

07-11-2006, 09:26 AM	#14
zooza1 Registered User Join Date: Sep 2004 Location: Linden, Tn. Posts: 232	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI Not Interested In Just Selling The Posi?

07-11-2006, 11:06 AM	#15
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: F/S: 1972 C10 LWB Coil Spring- BED-FRAME- POSI DNT DO IT!!!! I JUST NEED A LITTLE MORE TIME!!. Seriuosly if somebody wants the posi that would be cool with me because i really just want the bed and door. I dont even want the frame. __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.