downsizing / moving sale

[incoma]

TAKING OFFERS ON ALL REMAINING ITEMS - -

Well, I recently found out that I’m going to be moving again this summer. I don’t know where yet, but decided that since I have a bit of a notice I should sell some of my extra stuff that I’ve been lugging around through 6 states. I’ve used some of the stuff over the last several years, but the remaining stuff needs to go to clear some cash for the stuff I do need. Please calc your own shipping through usps from zipcode 73034. Your guess is as good as mine on the weight of some of this stuff.

I’m sure I’ll have more when I can decide what an appropriate price is..

1. driver quality gauge bezel - SOLD
2. new front deluxe windshield gasket - lowered price $25 + ship SOLD
panhard bar w/new bushings, satin black powder coat -SOLD
3. short water pump / 20k miles - $5 + ship
4. utility floor mats – camel - lowered price $20 + ship
5. 20 – acorn style lug nuts, chrome - lowered price $15 + ship
green arm rests, 1 has small tear - SOLD
2 headlight retainer rings - $10 + ship
ignition+door locks w/1 key - SOLD
6. quad intake and carb from 70 GMC, extra gaskets and floats - $50 + ship
7. 750 cfm holley series 4150, includes parts - lowered price $75 + ship
8. edelbrock 1406, pass side idle port is clogged - lowered price $125 + ship
9. lenses, gaskets, escheons, new heater control knobs, etc - $25 + ship SOLD
10. clear vent window glass - $15 + ship
11. triple valve springs – SBC - $10 + ship
4 malibu lights - $10 shipped
350 .030 cast pistons + rods 10k miles - $65 + ship
400 balancer - $30 + ship
350 balancer - $25 + ship
283 balancer ?? I took it off of a SBC- $10 + ship
12. vent windows, excellent shape if chrome is polished w/ rebuild kit (missing a rivet or two) - lowered price $160 + ship
13. rear shock mounts with shocks 10k miles on them - $20 + ship
14. complete bracket set with access from late 70’s truck - lowered price $40 + ship
15. trans harness, alt brakets, p/s pulley - $25 + ship
16. 327 sm journal crank, may need turn - $30 + ship
350 forged crank, may need turn - lowered price $75 + ship
400 cast crank, needs polish only already turned - lowered price $75 + ship
17. green dash pad, driver quality -SOLD
18. tow lights -lowered price $15 + ship
19. GMC custom glove box logo, 1 tab broken - $10 + ship
20. starter housing - $20 + ship

21. 2 SBC oil pans, were bead blasted adn stored for last 6-8 years, still clean on inside - $20 + ship each
22. SBC points type distributor with cap and rotor, ran well when last used 10 years ago - $15 + ship


I’ll take offers on anything or trade towards a complete TPI system like what GMC Paul recently had on sale. I may also consider other trades. I think the only thing else I need for the truck is door panels and carpet though. Let me know. Pictures posted below.

[incoma]

more

[incoma]

and..

[incoma]

and.....

[longhorn70gmc]

How much would shipping be on the Green Dash pad to 93555 CA?
Respectfully
Billy

[CUSTOM/10]

I'm interested in the complete engine accessory brackets, can you give me some more detail on them. What year truck they came from ? Are they from a SBC ? what comes with them. I'm mostly interested in all the a/c brackets & components.

Gary

["67"StepSide]

I'll take the gauge bezel.. just sent you a pm.

[UP GRADE]

just sent you a pm.

[incoma]

custom/10 - the brackets came off of a late 70's blazer, SBC. They were bolted to the engine when I got it. The alternator, a/c compressor, starter, and waterpump add a lot of weight. The price I'm asking is for EVERYTHING. That package will be heavy if you want EVERYTHING. The price listed is for all accessories and brackets. The A/c compressor is for core only, I was told the rest was in good condition.

longhorn70gmc - I guessed 10 lbs w/pkg - $13 parcel post

[CUSTOM/10]

I don't really need all the other stuff, ( water pump, alt, comp. ) Would you sell just the A/C brackets and pulleys that maybe needed to put A/C on my truck ? If so how much ?

Gary

[incoma]

I was considering the accessories as a freebie to the bracket sale. I'll do $50 shipped for the brackets without the accessories. It'll save me the hassle of boxing them. I can have it at the post office tonight if you want them. My paypal account is jroy74@cox.net.

[c-1072]

which window gasket with trim do you have ? front, rear, side . Thanks

[incoma]

c-1072 - the window gasket is for the front windshield. I'll edit to fix that, thanks.

[c-1072]

is the cst trim included and in good shape shipping to 14615 not sure how you would box it up . if you want to give me a shipped price to rochester ny 14615 let me know
Thanks

[tnblazerk5]

7. 750 cfm holley series 4150, includes parts - $80 + ship

what extra parts is there ? and is the butterfly shafts wore on that (up and down play) ?



and i still got a tpi set up for sale its off a 85 car 305 motor

[incoma]

c-1072 - cst trim? I've only got the gasket for sale, no stainless trim.

tnblazerk5 - I've got remnants of a renew kit or two, some power valves (I think that's what they're called). I played with the shaft and there is a tiny bit of play to it. I took the carb off a an old transam that I had about 15 years ago. I exchanged it for an electric choke 600 holley. At the time there was nothing wrong with it.

[longhorn70gmc]

Hello INCOMA,
I am sending you a PM.
Respectfully
Billy

[matt67350]

I'll take it.

Panhard bar w/new bushings, satin black powder coat - $30 + ship

PM me with payment info.

Thanks,
Matthew

[RicksTrucks]

I will take the ignition+door locks w/1 key - $5 + ship and 9. lenses, gaskets, escheons, new heater control knobs, etc - $25 + ship.
May come by and get it.

[incoma]

matt67350 - I sent you a pm .

rickstrucks - come down and pick this stuff up. if you have some extra cash, I'll gladly make some special deals on the rest of the stuff. It'll be great to have a truck guy to hang out with for a while. I'm going to be out of town next weekend though.

[c-1072]

sorry i was confused i need a front windshield gasket that will takes the custom trim i dont know if they are different or not ?

[incoma]

c-1072 - This front windshield gasket will accept the trim.

[incoma]

to the top

[KSCHEVYUP]

Incoma- I PM'd ya

[incoma]

pricing and status updated