55-59 Tip & Flip Dolly plans! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rokcrln · 07-05-2006, 11:14 PM

Ok the 55-59 Plans are now ready for shipment. You can read about the 67-72 cab dolly here ( http://67-72chevytrucks.com/vboard/s...77#post1635077 ). This dolly lets you roll the cab around the shop for easy moving and storage. Also when needed to work on the cab for rust repair and paint this dolly lets you tip it on any of four sides with out the cab contacting the ground in any way. So far I have been using these in my own shop for rust repair and body mods and they have been a real time saver. The link below is for Pay Pal or you can send a certified check for $28.95 to
Lewis Fabrication Design Inc.
Po Box 1015
Winters Ca.
95694
Tip & Flip Dolly for 55-59 only https://www.paypal.com/cgi-bin/websc...harset=UTF%2d8
If you have any questions please PM me for info that is not already covered.

Kevin
LFD Inc.

Jebb1978 · 07-06-2006, 01:04 PM

I am almost ready for it! Good timing!

JIMBO59 · 07-21-2006, 01:34 AM

Just Bought A Set Of Your Plans. Best Thing Since The Can Opener. Cant Wait To Get Her Built For My 59 Resto. Thanks.

WLPTMP · 07-21-2006, 09:11 AM

do you have plans for a suburban plans?
thanks
will

JIMBO59 · 07-24-2006, 09:58 PM

Got The Plans Today. Very Through. Im So Happy Oh So Happy. Thanks Rokcrln

Rokcrln · 07-31-2006, 10:43 PM

Quote:

Originally Posted by WLPTMP

do you have plans for a suburban plans?
thanks
will

No I do not it would be unsafe due to the weight. The largest one I am producing is for the early Blazers. For a burb I recomend going with a auto rotisseri. Yes they are more $ (alot more) but for a project that size and weight that is the safest way to go.

Kevin
LFD Inc.

Rokcrln · 07-31-2006, 10:54 PM

Quote:

Originally Posted by JIMBO59

Got The Plans Today. Very Through. Im So Happy Oh So Happy. Thanks Rokcrln

I feel the same way every time I work on a project in the shop that is on a dolly. It just makes everything so much easier. Here is a firewall job I am doing now and with the lift legs it makes it all a a good working height. Keep inmind I designed these for my use in my shop to speed my production and quality for my customers. The plans just turned out to be a nice by-product for everyone else.

Kevin
LFD Inc.

JIMBO59 · 08-01-2006, 03:16 AM

Good Pic, Thanks For The Plans.

Jebb1978 · 08-04-2006, 01:54 AM

Got the plans Kevin, even I can understand them! Thanks so much, for anyone on the fence on these, the plans are very organized and easy to understand.

Thanks again!

dwcsr · 08-04-2006, 10:28 PM

I got mine a while ago but haven't had chance to get the steel. A little old lady T boned my 2001 G30 15 passeger van on the 12th of july and they just now totaled it. $9700 in damage in a 35 mph crash. she was driving a honda passport. I got a truck now so I can get the steel and start on my cab.

DennyB · 08-07-2006, 02:27 PM

Quote:

Originally Posted by dwcsr

I got mine a while ago but haven't had chance to get the steel. A little old lady T boned my 2001 G30 15 passeger van on the 12th of july and they just now totaled it. $9700 in damage in a 35 mph crash. she was driving a honda passport. I got a truck now so I can get the steel and start on my cab.

Bummer, Hope you were ok.

dwcsr · 08-07-2006, 03:28 PM

I didn't get hurt. in fact I thought it was just a small hit till I got out and looked at it, then I still didn't see 9700 in damage. I have a ranger now so I'm actually going to have to be courtious while driving. No more going where I want on the hiway. You know those one blink lane changes that make honda accords fly off the road.

07-05-2006, 11:14 PM	#1
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	55-59 Tip & Flip Dolly plans! Ok the 55-59 Plans are now ready for shipment. You can read about the 67-72 cab dolly here ( http://67-72chevytrucks.com/vboard/s...77#post1635077 ). This dolly lets you roll the cab around the shop for easy moving and storage. Also when needed to work on the cab for rust repair and paint this dolly lets you tip it on any of four sides with out the cab contacting the ground in any way. So far I have been using these in my own shop for rust repair and body mods and they have been a real time saver. The link below is for Pay Pal or you can send a certified check for $28.95 to Lewis Fabrication Design Inc. Po Box 1015 Winters Ca. 95694 Tip & Flip Dolly for 55-59 only https://www.paypal.com/cgi-bin/websc...harset=UTF%2d8 If you have any questions please PM me for info that is not already covered. Kevin LFD Inc. Attached Images Last edited by Rokcrln; 07-05-2006 at 11:20 PM.

07-06-2006, 01:04 PM	#2
Jebb1978 Senior Member Join Date: Aug 2005 Location: Mesa,Az Posts: 3,713	Re: 55-59 Tip & Flip Dolly plans! I am almost ready for it! Good timing! __________________ 1959 GMC project

07-21-2006, 01:34 AM	#3
JIMBO59 APACHE CLUB Join Date: Jul 2006 Location: FORT WORTH, TEXAS Posts: 144	Re: 55-59 Tip & Flip Dolly plans! Just Bought A Set Of Your Plans. Best Thing Since The Can Opener. Cant Wait To Get Her Built For My 59 Resto. Thanks. __________________ JIMBO59CHEVY

07-21-2006, 09:11 AM	#4
WLPTMP Active Member Join Date: Sep 2005 Location: North Hudson NY Posts: 221	Re: 55-59 Tip & Flip Dolly plans! do you have plans for a suburban plans? thanks will

07-24-2006, 09:58 PM	#5
JIMBO59 APACHE CLUB Join Date: Jul 2006 Location: FORT WORTH, TEXAS Posts: 144	Re: 55-59 Tip & Flip Dolly plans! Got The Plans Today. Very Through. Im So Happy Oh So Happy. Thanks Rokcrln __________________ JIMBO59CHEVY

08-01-2006, 03:16 AM	#8
JIMBO59 APACHE CLUB Join Date: Jul 2006 Location: FORT WORTH, TEXAS Posts: 144	Re: 55-59 Tip & Flip Dolly plans! Good Pic, Thanks For The Plans. __________________ JIMBO59CHEVY

08-04-2006, 01:54 AM	#9
Jebb1978 Senior Member Join Date: Aug 2005 Location: Mesa,Az Posts: 3,713	Re: 55-59 Tip & Flip Dolly plans! Got the plans Kevin, even I can understand them! Thanks so much, for anyone on the fence on these, the plans are very organized and easy to understand. Thanks again! __________________ 1959 GMC project

08-04-2006, 10:28 PM	#10
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 55-59 Tip & Flip Dolly plans! I got mine a while ago but haven't had chance to get the steel. A little old lady T boned my 2001 G30 15 passeger van on the 12th of july and they just now totaled it. $9700 in damage in a 35 mph crash. she was driving a honda passport. I got a truck now so I can get the steel and start on my cab.

08-07-2006, 03:28 PM	#12
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: 55-59 Tip & Flip Dolly plans! I didn't get hurt. in fact I thought it was just a small hit till I got out and looked at it, then I still didn't see 9700 in damage. I have a ranger now so I'm actually going to have to be courtious while driving. No more going where I want on the hiway. You know those one blink lane changes that make honda accords fly off the road.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.