kind of a build-mess page - The 1947 - Present Chevrolet & GMC Truck Message Board Network

E's c10swbfleet · 07-09-2006, 09:44 PM

i bout this truck a while back drove it for awhile, until i found this site it turned me in to a maniac. started tearing it down so i could por 15 the frame. then i found the suspension page, all the door dragers. found bondo in the roof above the door found a nother truck with a good cab for 100$ it was a 67gmc long fleet. so here is my progress

E's c10swbfleet · 07-09-2006, 09:49 PM

if any one in the area needs some parts shoot me a mesage.

*rage'nrat638* · 07-09-2006, 09:51 PM

this site it turned me in to a maniac....

welcome to the sickness...

nice parts...keep us posted..your pal another sick one..mark

E's c10swbfleet · 07-09-2006, 10:22 PM

i am glad i am not alone

Longhorn Man · 07-09-2006, 10:26 PM

I hope that's on air bags or something! That sucker is LOW :O
This place does kinda inspire a man huh?

Southedisto · 07-09-2006, 10:35 PM

Whoa!!

smbrouss70 · 07-09-2006, 10:50 PM

I see that you z'ed the front, you got any pics of your rear set-up? Looks good so far. I'd be doing the same thing as you, if I wasn't so damn broke right now.

E's c10swbfleet · 07-09-2006, 11:21 PM

its more the time than the money (i mean its more the money than the time) i mean Ah man u know what i mean. i have about 120$ into the frame work scrap 2x4 tubing from the yard,3 pounds of wire for the welder,a 14in cut off saw blade, sawzall blades, 2 5in clamps,a few grinding wheels

just the notches are made no 4link or brackets or supports. longhorn man yes it will be on baggs

E's c10swbfleet · 07-11-2006, 02:07 AM

does any need a long bedfleet or frame or ac dash i would hate to throw this stuff away.

*1972C10* · 07-11-2006, 02:40 AM

Sell the A/C Dash There Bank

E's c10swbfleet · 07-12-2006, 01:18 AM

sell no i will give it to u. find out what shipping is. my zip 93422. all the extra stuff goes for free. just ask.

67chevy2wd · 07-12-2006, 01:34 AM

hey put me on the list for the dash. I will have to find out shipping. Also what do you have for inner fenders, if you are getting rid of them would you please take pics and send them to me, I will pm you my email. Man if I could I would take the whole pickup.

67chevy2wd · 07-12-2006, 10:30 PM

Scratch the inner fenders but I will still take the a/c dash if it is still available.

E's c10swbfleet · 07-17-2006, 01:35 AM

just about got the front end done the x member sits 7in off the ground i figure 2 1/2 drop spindels 2in off the tire size and cut the bump stop braket off for another 2in and i should have it. the overall wheel and tire size is 30in 18in wheels and 12in of rubber.

**truckdude239** · 07-17-2006, 02:04 AM

darn man long bed for free wish iw as closer i need a bed bad lol

krue · 07-17-2006, 02:12 AM

The sickness is right! All I have to do is go to the FAQ Submission page and look at the Index Thread to make a list of stuff I want to do, but don't have the time or money as of now.

67chevy2wd · 07-18-2006, 08:18 PM

I was just wondering what you found out on that A/C dash. If it is do you take paypal?

Dano69c10 · 07-18-2006, 08:31 PM

Where are you located? I might be interested in the LWB fleetside bed.
Dano

E's c10swbfleet · 08-04-2006, 12:32 AM

sorry guys it has been a while. after cutting the back half off again.the frame is final to my liking. so i put the cab on for some insperation.

matthufham · 08-04-2006, 12:25 PM

wow it's looking good. it's a good thing you had a donor cab because trying to fix the old one would of delayed you tons.

E's c10swbfleet · 08-04-2006, 10:37 PM

i didnt know what to do. i just told every one i saw about wanting a 67 cab or truck. it turned out that the ampm where i get my coffee the lady working there had a neighbor that had one in his field i was there after work that day with a tow truck.

LUV2XCLR8 · 08-04-2006, 10:42 PM

Man that thing is low

E's c10swbfleet · 08-04-2006, 10:49 PM

now i just have to worry about geting it back up. air baggs should be here soon.

mgraham · 08-04-2006, 11:25 PM

Would like the bed. Where at in Cali?

**FRENCHBLUE72** · 08-04-2006, 11:51 PM

Scrapeing is good...

07-09-2006, 09:44 PM	#1
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	kind of a build-mess page i bout this truck a while back drove it for awhile, until i found this site it turned me in to a maniac. started tearing it down so i could por 15 the frame. then i found the suspension page, all the door dragers. found bondo in the roof above the door found a nother truck with a good cab for 100$ it was a 67gmc long fleet. so here is my progress Attached Images

07-09-2006, 09:49 PM	#2
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: kind of a build-mess page if any one in the area needs some parts shoot me a mesage. Attached Images

07-09-2006, 09:51 PM	#3
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: kind of a build-mess page this site it turned me in to a maniac.... welcome to the sickness... nice parts...keep us posted..your pal another sick one..mark

07-09-2006, 10:22 PM	#4
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: kind of a build-mess page i am glad i am not alone

07-09-2006, 10:26 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: kind of a build-mess page I hope that's on air bags or something! That sucker is LOW :O This place does kinda inspire a man huh?

07-09-2006, 10:35 PM	#6
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: kind of a build-mess page Whoa!! __________________ I like wheelin in Dixie!

07-09-2006, 10:50 PM	#7
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,782	Re: kind of a build-mess page I see that you z'ed the front, you got any pics of your rear set-up? Looks good so far. I'd be doing the same thing as you, if I wasn't so damn broke right now. __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

07-09-2006, 11:21 PM	#8
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: kind of a build-mess page its more the time than the money (i mean its more the money than the time) i mean Ah man u know what i mean. i have about 120$ into the frame work scrap 2x4 tubing from the yard,3 pounds of wire for the welder,a 14in cut off saw blade, sawzall blades, 2 5in clamps,a few grinding wheels just the notches are made no 4link or brackets or supports. longhorn man yes it will be on baggs Last edited by E's c10swbfleet; 07-09-2006 at 11:27 PM.

07-11-2006, 02:07 AM	#9
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: kind of a build-mess page does any need a long bedfleet or frame or ac dash i would hate to throw this stuff away.

07-11-2006, 02:40 AM	#10
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Re: kind of a build-mess page Sell the A/C Dash There Bank

07-12-2006, 01:18 AM	#11
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: kind of a build-mess page sell no i will give it to u. find out what shipping is. my zip 93422. all the extra stuff goes for free. just ask.

07-12-2006, 01:34 AM	#12
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: kind of a build-mess page hey put me on the list for the dash. I will have to find out shipping. Also what do you have for inner fenders, if you are getting rid of them would you please take pics and send them to me, I will pm you my email. Man if I could I would take the whole pickup. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban Last edited by 67chevy2wd; 07-12-2006 at 01:43 AM.

07-12-2006, 10:30 PM	#13
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: kind of a build-mess page Scratch the inner fenders but I will still take the a/c dash if it is still available. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

07-17-2006, 01:35 AM	#14
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: kind of a build-mess page just about got the front end done the x member sits 7in off the ground i figure 2 1/2 drop spindels 2in off the tire size and cut the bump stop braket off for another 2in and i should have it. the overall wheel and tire size is 30in 18in wheels and 12in of rubber. Attached Images

07-17-2006, 02:04 AM	#15
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,234	Re: kind of a build-mess page darn man long bed for free wish iw as closer i need a bed bad lol __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube



Register or Log In To remove these advertisements.

07-17-2006, 02:12 AM	#16
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: kind of a build-mess page The sickness is right! All I have to do is go to the FAQ Submission page and look at the Index Thread to make a list of stuff I want to do, but don't have the time or money as of now. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-18-2006, 08:18 PM	#17
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: kind of a build-mess page I was just wondering what you found out on that A/C dash. If it is do you take paypal? __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban Last edited by 67chevy2wd; 07-19-2006 at 12:51 AM.

07-18-2006, 08:31 PM	#18
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: kind of a build-mess page Where are you located? I might be interested in the LWB fleetside bed. Dano __________________ '69 Fleet It ain't yours, if you didn't build it!

08-04-2006, 12:32 AM	#19
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: kind of a build-mess page sorry guys it has been a while. after cutting the back half off again.the frame is final to my liking. so i put the cab on for some insperation. Attached Images

08-04-2006, 12:25 PM	#20
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: kind of a build-mess page wow it's looking good. it's a good thing you had a donor cab because trying to fix the old one would of delayed you tons.

08-04-2006, 10:37 PM	#21
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: kind of a build-mess page i didnt know what to do. i just told every one i saw about wanting a 67 cab or truck. it turned out that the ampm where i get my coffee the lady working there had a neighbor that had one in his field i was there after work that day with a tow truck.

08-04-2006, 10:42 PM	#22
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,478	Re: kind of a build-mess page Man that thing is low __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-04-2006, 10:49 PM	#23
E's c10swbfleet Registered User Join Date: Apr 2006 Location: calif Posts: 64	Re: kind of a build-mess page now i just have to worry about geting it back up. air baggs should be here soon.

08-04-2006, 11:25 PM	#24
mgraham Registered User Join Date: Oct 2005 Location: Tucson Posts: 13	Re: kind of a build-mess page Would like the bed. Where at in Cali?

08-04-2006, 11:51 PM	#25
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: kind of a build-mess page Scrapeing is good... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.