K20 Front Axles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 07-16-2006, 08:12 PM

1974 Chevy K20 Dana 44 with 4.10s and flat top knuckles (8 lug). All new ball joints, bearings and calipers. You'll need to turn the new rotors and lube it up as this axle's been sitting for 3 years since it's rebuild. 200.00

1973 Chevy K20 Dana 44 with 3.73's and flat top knuckles (8 lug). All new ball joints, bearings and calipers. You'll need to turn the new rotors and lube it up as this axle's been sitting for 3 years since it's rebuild. 200.00

These should fit earlier trucks as well. Good way to get disk brakes and open knuckles.

Calipers on both above axles have been sealed. Dust boots look ok.

JREs69er · 07-17-2006, 07:41 AM

The one with the 4.10's, is that complete with lockouts. Any idea if this can be shipped to 60446 and cost. Also, any pics'. I might be interested

*FormerMember* · 07-17-2006, 07:51 AM

It's complete with lock outs. They both are.

Shipping would be horrendous.

JREs69er · 07-17-2006, 07:57 AM

i wasn't sure about the shipping, figured i would ask. NH's a little far for me, good luck

*FormerMember* · 07-18-2006, 10:06 AM

I may be driving a transmission out there and picking up a frame.

Shipping may have just gotten cheaper.

*FormerMember* · 07-19-2006, 10:10 AM

bump... I am going to Ohio and I could bring these with me for a bit of diesel.

JREs69er · 07-20-2006, 01:40 AM

when are you making your trip to ohio, i am going to be around the cedar point area on 8/9 and 8/10. not sure where you are heading but might be a possibility to meet.

*FormerMember* · 07-20-2006, 07:56 AM

Quote:

Originally Posted by JREs69er

when are you making your trip to ohio, i am going to be around the cedar point area on 8/9 and 8/10. not sure where you are heading but might be a possibility to meet.

I am leaving in about 60 mins.

07-16-2006, 08:12 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	K20 Front Axles 1974 Chevy K20 Dana 44 with 4.10s and flat top knuckles (8 lug). All new ball joints, bearings and calipers. You'll need to turn the new rotors and lube it up as this axle's been sitting for 3 years since it's rebuild. 200.00 1973 Chevy K20 Dana 44 with 3.73's and flat top knuckles (8 lug). All new ball joints, bearings and calipers. You'll need to turn the new rotors and lube it up as this axle's been sitting for 3 years since it's rebuild. 200.00 These should fit earlier trucks as well. Good way to get disk brakes and open knuckles. Calipers on both above axles have been sealed. Dust boots look ok. Last edited by FormerMember; 07-16-2006 at 08:12 PM.

07-17-2006, 07:41 AM	#2
JREs69er Registered User Join Date: Apr 2003 Location: Romeoville, IL Posts: 75	Re: K20 Front Axles The one with the 4.10's, is that complete with lockouts. Any idea if this can be shipped to 60446 and cost. Also, any pics'. I might be interested

07-17-2006, 07:51 AM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: K20 Front Axles It's complete with lock outs. They both are. Shipping would be horrendous.

07-17-2006, 07:57 AM	#4
JREs69er Registered User Join Date: Apr 2003 Location: Romeoville, IL Posts: 75	Re: K20 Front Axles i wasn't sure about the shipping, figured i would ask. NH's a little far for me, good luck

07-18-2006, 10:06 AM	#5
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: K20 Front Axles I may be driving a transmission out there and picking up a frame. Shipping may have just gotten cheaper.

07-19-2006, 10:10 AM	#6
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: K20 Front Axles bump... I am going to Ohio and I could bring these with me for a bit of diesel.

07-20-2006, 01:40 AM	#7
JREs69er Registered User Join Date: Apr 2003 Location: Romeoville, IL Posts: 75	Re: K20 Front Axles when are you making your trip to ohio, i am going to be around the cedar point area on 8/9 and 8/10. not sure where you are heading but might be a possibility to meet.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.