So what ya got's done.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 07-23-2006, 10:33 PM

....this weekend? I got nothing truck related except for the TOTM stuff on the baord. I had a computer job on Saturday and today was mow the yard and pray the 1972 Snapper makes it through another week. It did, and I beat the rain too, so there was some good.

What yaw'll got done??????

Longhorn Man · 07-23-2006, 10:35 PM

I tried installing that crap in a box they call an exhaust kit.
I'm driving uncorked to work tomorow, and i hope I have enough left over to pay the bloody pipe guys.

ChevyDude · 07-23-2006, 11:54 PM

So Andy...was that JC kit junk?

Rollie396 · 07-24-2006, 12:02 AM

Got the new Lokar shifter installed,set up and tore back out again.It's one fine product!
That and I did a little fibreglass work on the old guage bezel.

Broken_down? · 07-24-2006, 12:04 AM

Well, I fixed a compter that has been pissing me off for the last 2 months. Looked for some helicoil for the mainfold (long story) with no luck. And sence it has been 110+ here in Northern CA every single dam day I complained about having to use a dam swamp that when it gets to hot just circulates the hot moist air. Then after that I was reminded that I cannot drive my pickup till I get the time to drop tranny for fix flex plate....

rich

fade94 · 07-24-2006, 08:20 AM

Installed new headers and got the front clip back on. Drove it down the driveway and back. I have to say, the Lunati cam and 64cc Double hump 2.02 heads woke this motor up. First time I have driven since I converted it to a short bed. Next step if finishing up the body work on the bed and welding all the trim holes on the fenders and doors.

67ChevyRedneck · 07-24-2006, 08:24 AM

Moved the girlfriend's giant mountain of crap from Spartanburg, SC to Athens, GA so she's all set when she goes back to grad school. We took my truck with a full bed and cab and her parents explored packed full with a 12' trailer behind that! Holy crap I'm pooped this morning! I swear, all of the times I moved from home to college I never had more than a truck bed full!!!

NEXT WEEKEND.... FINISHING PAINT ON THE 67!!!!!!!!!!!!!!!

**basketcase** · 07-24-2006, 08:55 AM

Got nuthin' done this week. I'm at a standstill until I get my carb back. I could clean the garage but why do today what I can put off until tomorrow.

I'll get energized again when my carb is on the bench.

Tom

BowTieOgre · 07-24-2006, 08:58 AM

I spent about 2 hours yesterday pretreating, pressure washing and scrubbing the frame I picked up from Djracer on Friday (thx man!). It was rather comical once I turned on the water. The guy I borrowed it from said it "leaks around the handle a little"...I got more water on ME (insert Benny Hill music) than I did on the frame! Its clean now and ready for some paint.

jbon64 · 07-24-2006, 09:05 AM

spent the whole weekend sick as a dog . high temp and soaked in sweat

glock35ipsc · 07-24-2006, 09:22 AM

Temporarily installed the tilt column so that I could install the Lokar shift cable. Glad I did, because I scratched the crap out of the bottom of the column and the firewall trying to figure out the best position for the aluminum bracket that clamps around the column. But I finally got it figured out and everything is adjusted perfectly, so now when the truck goes back together all I need to do is mount the aluminum clamp to the column and hook up the cable. That bracket is a tight fit!

Also ran the hood, grill lower radiator splash pan, and the rear bed splash pans to the sandblaster on Saturday morning. I am going to go get those tonight after work.

69CvyPickup4x · 07-24-2006, 12:17 PM

I pulled the trans out of my burban, put a motor in it and killed about 30 black widows which had nested under my gas tank which i was going to pull out until i saw the damn spiders and that was it..

shelby987 · 07-24-2006, 12:24 PM

GOT MY TRUCK BACK ON THE ROAD....first time since.....mmmm....february!

The axle swap from He!! is done, the headers, carb, booster, new MC, cable throttle linkage, and disc brakes are all in, and functioning (might need some timing/carb tuning), but its back on the road......now its time to get an exhaust installed (open headers on an I6 that dump right below the drivers seat are deafening!)

HuggerCST · 07-24-2006, 01:30 PM

I installed the headliner and new headliner trim on my '70. Small job, but alot more than I have gotten accomplished on it in a while.

68jimmy · 07-24-2006, 02:45 PM

I swapped the white wagon wheels on the rear for my new tires and rally wheels that I've been hanging onto for over a year! Pulled it back the garage and started the front end rebuild to add disc brakes...

ThatOneBlue67 · 07-24-2006, 08:04 PM

Mmm.... Nothing. It's sickening.

I gotta start savin' up again. I've been on leave from work for 10 days. Ask again when I have some "spend on the truck" money.

07-23-2006, 10:33 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	So what ya got's done.... ....this weekend? I got nothing truck related except for the TOTM stuff on the baord. I had a computer job on Saturday and today was mow the yard and pray the 1972 Snapper makes it through another week. It did, and I beat the rain too, so there was some good. What yaw'll got done?????? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-23-2006, 10:35 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: So what ya got's done.... I tried installing that crap in a box they call an exhaust kit. I'm driving uncorked to work tomorow, and i hope I have enough left over to pay the bloody pipe guys.

07-23-2006, 11:54 PM	#3
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: So what ya got's done.... So Andy...was that JC kit junk?

07-24-2006, 12:02 AM	#4
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Re: So what ya got's done.... Got the new Lokar shifter installed,set up and tore back out again.It's one fine product! That and I did a little fibreglass work on the old guage bezel. __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

07-24-2006, 08:20 AM	#6
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Re: So what ya got's done.... Installed new headers and got the front clip back on. Drove it down the driveway and back. I have to say, the Lunati cam and 64cc Double hump 2.02 heads woke this motor up. First time I have driven since I converted it to a short bed. Next step if finishing up the body work on the bed and welding all the trim holes on the fenders and doors. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

07-24-2006, 08:24 AM	#7
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: So what ya got's done.... Moved the girlfriend's giant mountain of crap from Spartanburg, SC to Athens, GA so she's all set when she goes back to grad school. We took my truck with a full bed and cab and her parents explored packed full with a 12' trailer behind that! Holy crap I'm pooped this morning! I swear, all of the times I moved from home to college I never had more than a truck bed full!!! NEXT WEEKEND.... FINISHING PAINT ON THE 67!!!!!!!!!!!!!!! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-24-2006, 08:55 AM	#8
basketcase Senior Member Join Date: Oct 2001 Location: Edgerton OH USA Posts: 633	Re: So what ya got's done.... Got nuthin' done this week. I'm at a standstill until I get my carb back. I could clean the garage but why do today what I can put off until tomorrow. I'll get energized again when my carb is on the bench. Tom __________________ '69 swb stepside in progress. '59 Corvette lifetime project

07-24-2006, 08:58 AM	#9
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: So what ya got's done.... I spent about 2 hours yesterday pretreating, pressure washing and scrubbing the frame I picked up from Djracer on Friday (thx man!). It was rather comical once I turned on the water. The guy I borrowed it from said it "leaks around the handle a little"...I got more water on ME (insert Benny Hill music) than I did on the frame! Its clean now and ready for some paint. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

07-24-2006, 09:05 AM	#10
jbon64 Registered User Join Date: Jan 2006 Location: sidney , illinois Posts: 312	Re: So what ya got's done.... spent the whole weekend sick as a dog . high temp and soaked in sweat __________________ hey.....smell my finger 64 nova wagon , 63 nova convertible

07-24-2006, 09:22 AM	#11
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: So what ya got's done.... Temporarily installed the tilt column so that I could install the Lokar shift cable. Glad I did, because I scratched the crap out of the bottom of the column and the firewall trying to figure out the best position for the aluminum bracket that clamps around the column. But I finally got it figured out and everything is adjusted perfectly, so now when the truck goes back together all I need to do is mount the aluminum clamp to the column and hook up the cable. That bracket is a tight fit! Also ran the hood, grill lower radiator splash pan, and the rear bed splash pans to the sandblaster on Saturday morning. I am going to go get those tonight after work. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

07-24-2006, 12:17 PM	#12
69CvyPickup4x Registered User Join Date: Apr 2006 Location: Bellflower Posts: 79	Re: So what ya got's done.... I pulled the trans out of my burban, put a motor in it and killed about 30 black widows which had nested under my gas tank which i was going to pull out until i saw the damn spiders and that was it..

07-24-2006, 12:24 PM	#13
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: So what ya got's done.... GOT MY TRUCK BACK ON THE ROAD....first time since.....mmmm....february! The axle swap from He!! is done, the headers, carb, booster, new MC, cable throttle linkage, and disc brakes are all in, and functioning (might need some timing/carb tuning), but its back on the road......now its time to get an exhaust installed (open headers on an I6 that dump right below the drivers seat are deafening!) __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

07-24-2006, 01:30 PM	#14
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: So what ya got's done.... I installed the headliner and new headliner trim on my '70. Small job, but alot more than I have gotten accomplished on it in a while. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

07-24-2006, 02:45 PM	#15
68jimmy Registered User Join Date: Dec 2003 Location: albuquerque Posts: 431	Re: So what ya got's done.... I swapped the white wagon wheels on the rear for my new tires and rally wheels that I've been hanging onto for over a year! Pulled it back the garage and started the front end rebuild to add disc brakes... Attached Images __________________ 78 C10 LWB Super Cheyenne

07-24-2006, 08:04 PM	#16
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: So what ya got's done.... Mmm.... Nothing. It's sickening. I gotta start savin' up again. I've been on leave from work for 10 days. Ask again when I have some "spend on the truck" money. __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.