Mixed 67-8 front clip in NH - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 07-24-2006, 12:19 PM

Decided to not use this on my Hot Rod Hooker project I am putting together/collecting parts for.

67 Front fenders, in pretty solid shape, needs inner fenders and a little love.

68 Front Radiator Support. Had the rot under the battery cut out, with new sheet metal welded in.

68 Hood in solid shape with the chevrolet still intact. Few small dings that can be easily taken out.

68 lower valence- surface rust, but should clean up and paint well.

68 grill- no major dings, should clean up well.

71 2wd BBC radiator and shroud

I also have stainless re-pop eyebrow trim NIB

I bead blasted all the brackets and latches... hinges and springs have yet to be done. Paint and go, or I can powder coat them.

500.00

I can deliver these on the eastern seaboard for diesel fuel while running other vehicles around in early-mid august. Indiana is my cut off.

ALL CORRESPONDENCE HERE, REGARDING THIS SALE HERE.

FIRST COME, FIRST SERVE.

byrd · 07-24-2006, 09:58 PM

You going to be anywhere near Louisville Ky. in your travels? I would like the lot of parts, love to see pics. Any rust in the fenders? How much for fuel to get you close to me? Needing anything in trade? I don't have too much ,but thought I'd ask.....Thanks...Randy

*FormerMember* · 07-24-2006, 11:00 PM

Quote:

Originally Posted by byrd

You going to be anywhere near Louisville Ky. in your travels? I would like the lot of parts, love to see pics. Any rust in the fenders? How much for fuel to get you close to me? Needing anything in trade? I don't have too much ,but thought I'd ask.....Thanks...Randy

I'll be coming down somewhere in Indiana to pick up a wrecker around 4Aug06.

I'll take pics in a bit. Not much rust (if any) in the fenders.

byrd · 07-25-2006, 06:11 AM

OK, where in Indiana? Thanks and LMK...Randy

*FormerMember* · 07-25-2006, 10:13 AM

madison indiana

**CPNE** · 07-25-2006, 10:45 AM

If willing to separate, I'd be interested in the 68 hood. Price and pics?

*FormerMember* · 07-25-2006, 11:18 AM

Quote:

Originally Posted by CPNE

If willing to separate, I'd be interested in the 68 hood. Price and pics?

I'd rather not split at this point. Thanks though.

byrd · 07-25-2006, 01:01 PM

Grendel, you going to Jamies? I have meet him in Madison before and it's not too far from me if I can save on the cost of fuel to meet there would be cool with me...LMK...Randy

*FormerMember* · 07-25-2006, 02:20 PM

Quote:

Originally Posted by byrd

Grendel, you going to Jamies? I have meet him in Madison before and it's not too far from me if I can save on the cost of fuel to meet there would be cool with me...LMK...Randy

Yes, I am. I have to pick up that wrecker he has.

**jamie72** · 07-25-2006, 05:09 PM

you guys work it out let me know, byrd if you need to store anything here for a few days or so thats fine.

byrd · 07-25-2006, 06:06 PM

Thanks,Jamie!!! This board rocks!!! I shouldn't have any trouble getting it all on one trip, now that I've got Huck's old trailor, but the 4th is on a friday and most likly won't be able to get there on Friday, but Satuday is good for me. So if I need to Jamie I will take you up on that offer to leaveit there a day..

byrd · 07-26-2006, 05:43 AM

Been able to get any pics?

*FormerMember* · 07-26-2006, 09:07 AM

I am waiting for a cooler day. Most of the items are stored in my attic...

byrd · 07-26-2006, 05:36 PM

I know what you mean, just when you can.

**jamie72** · 07-26-2006, 05:46 PM

i didn`t think it ever got hot up there...

randy not a prolbem you can leave the stuff here for as long as you need.

*FormerMember* · 07-26-2006, 05:49 PM

Quote:

Originally Posted by jamie72

i didn`t think it ever got hot up there...

randy not a prolbem you can leave the stuff here for as long as you need.

95 degrees here today, according to my thermometer in my truck. Humid as well.

No way I am going into the attic today!

byrd · 07-26-2006, 09:01 PM

I was in one for about an hour

today installing 11 recessed can lights at work...$$$ was the only thing that got me in there

it was in the morning and it was about 90 or so in the attic @ 7 am with about 90% humidity. I love the ohio valley

**CUSTOM/10** · 07-26-2006, 09:13 PM

Go for it, you had me up there the other day.

*FormerMember* · 07-26-2006, 09:22 PM

Quote:

Originally Posted by CUSTOM/10

Go for it, you had me up there the other day.

Yah, you're the one that said let's clean this up...

**CUSTOM/10** · 07-26-2006, 09:29 PM

I don't know if it was me that said that, but next time I'll make sure we're standing in my garage when it's said.

*FormerMember* · 07-26-2006, 09:37 PM

Quote:

Originally Posted by CUSTOM/10

I don't know if it was me that said that, but next time I'll make sure we're standing in my garage when it's said.

Works for me... your garage is way smaller!

byrd · 08-03-2006, 06:45 AM

Grendel, been able to get pics of the parts? Are you still coming to Jamie's?
I'm still interested in the parts...Randy

07-24-2006, 12:19 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Mixed 67-8 front clip in NH Decided to not use this on my Hot Rod Hooker project I am putting together/collecting parts for. 67 Front fenders, in pretty solid shape, needs inner fenders and a little love. 68 Front Radiator Support. Had the rot under the battery cut out, with new sheet metal welded in. 68 Hood in solid shape with the chevrolet still intact. Few small dings that can be easily taken out. 68 lower valence- surface rust, but should clean up and paint well. 68 grill- no major dings, should clean up well. 71 2wd BBC radiator and shroud I also have stainless re-pop eyebrow trim NIB I bead blasted all the brackets and latches... hinges and springs have yet to be done. Paint and go, or I can powder coat them. 500.00 I can deliver these on the eastern seaboard for diesel fuel while running other vehicles around in early-mid august. Indiana is my cut off. ALL CORRESPONDENCE HERE, REGARDING THIS SALE HERE. FIRST COME, FIRST SERVE.

07-25-2006, 10:13 AM	#5
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Mixed 67-8 front clip in NH madison indiana

07-25-2006, 10:45 AM	#6
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Re: Mixed 67-8 front clip in NH If willing to separate, I'd be interested in the 68 hood. Price and pics? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

07-25-2006, 05:09 PM	#10
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: Mixed 67-8 front clip in NH you guys work it out let me know, byrd if you need to store anything here for a few days or so thats fine. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

07-26-2006, 09:07 AM	#13
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Mixed 67-8 front clip in NH I am waiting for a cooler day. Most of the items are stored in my attic...

07-26-2006, 05:46 PM	#15
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: Mixed 67-8 front clip in NH i didn`t think it ever got hot up there... randy not a prolbem you can leave the stuff here for as long as you need. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

07-26-2006, 09:13 PM	#18
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Re: Mixed 67-8 front clip in NH Go for it, you had me up there the other day. __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

07-26-2006, 09:29 PM	#20
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Re: Mixed 67-8 front clip in NH I don't know if it was me that said that, but next time I'll make sure we're standing in my garage when it's said. __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.