Extreme Drop Cross Member.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bryanw1968 · 07-31-2006, 12:12 PM

Early Classic sells these and it looks like a great idea to get your exhaust inside the frame rails and through the cross member. The catch is that you have to have at least 5" of drop in the back. I did the 2"/4" drop which is close. Has anyone here installed one of these?

http://www.earlyclassic.com/catalog....gory=Drop+Kits

Joe67 · 07-31-2006, 12:13 PM

I like it, Im planning to cut holes in my stock unit if I run the exhaust back that far

bryanw1968 · 07-31-2006, 02:02 PM

I thought about that also. But, I don't want to compromise the integrity of that cross member. Have you ever seen the copperhead truck on truck t.v.?
They installed one of these and ran the exhaust through it. They actually installed a collector in the middle of the hole to joint the exhaust.

http://www.staceydavid.com/projects/...headphotos.htm

07-31-2006, 12:12 PM	#1
bryanw1968 Senior Member Join Date: Jul 2006 Location: Leander, Texas Posts: 850	Extreme Drop Cross Member.... Early Classic sells these and it looks like a great idea to get your exhaust inside the frame rails and through the cross member. The catch is that you have to have at least 5" of drop in the back. I did the 2"/4" drop which is close. Has anyone here installed one of these? http://www.earlyclassic.com/catalog....gory=Drop+Kits

07-31-2006, 12:13 PM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Re: Extreme Drop Cross Member.... I like it, Im planning to cut holes in my stock unit if I run the exhaust back that far __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

07-31-2006, 02:02 PM	#3
bryanw1968 Senior Member Join Date: Jul 2006 Location: Leander, Texas Posts: 850	Re: Extreme Drop Cross Member.... I thought about that also. But, I don't want to compromise the integrity of that cross member. Have you ever seen the copperhead truck on truck t.v.? They installed one of these and ran the exhaust through it. They actually installed a collector in the middle of the hole to joint the exhaust. http://www.staceydavid.com/projects/...headphotos.htm



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.