WTB: Factory 67-72 Truck Tilt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kna4977** · 08-02-2006, 05:44 PM

Looking to buy a 67-72 Chevy or GMC truck tilt (not van) for a truck with an automatic transmission. Please let me know if you can help me out, and how much your are asking.

thanks

Side Show · 08-02-2006, 11:17 PM

There was one here in the local paper (Phoenix, AZ) last weekend. He wanted $240. Too pricey for me.

**kna4977** · 08-03-2006, 09:34 AM

Quote:

Originally Posted by Side Show

There was one here in the local paper (Phoenix, AZ) last weekend. He wanted $240. Too pricey for me.

If it's not refurbished, that is too pricey. I'm assuming it isn't. Nice ones seem to go for $300 on average.

Side Show · 08-03-2006, 01:51 PM

He said it was complete & nice but not refurbished.

**PICKMUP** · 08-03-2006, 02:11 PM

Good solid originals, not restored, go for $250-300 around here. Fresh built ones with lots of new parts run about $500.

**jamie72** · 08-03-2006, 03:38 PM

same here pickmup

**kna4977** · 08-03-2006, 04:20 PM

I would pay $300 for a decent one.

**special-K** · 08-04-2006, 06:10 AM

You`ll be looking for a 69/72 column.I`ve had alot of guys swear van columns were truck.So,it helps to sound like you know your stuff around these columns.Not that there`s any crooks thay survive here,you may be looking elsewhere.The guys I`m talking about are swap-meet terds that want to duck`n`run

.

vtblazer · 08-04-2006, 08:29 AM

They come up on the parts board with regular frequency.

Check the parts section everyday and you'll soon score one.

Most everybody knows what they are and what their worth, if you find a decent one for 250/300, IMO buy it.

Last one I got was in a parts truck I paid $200.00 for but had to drive 3hrs each way to get it.

**special-K** · 08-04-2006, 10:39 PM

Heh heh,once I discovered the tilts came in trucks I wanted one bad.I saw a`71 longbed for sale for $600,pretty solid.I believe it was in the mid-80s.I bought the truck,swapped columns and sold the truck to this guy for $800 because he really liked the paint.It was Hugger Orange w/black stripe down the side that got wider in the rear,then turned up to the top of the bed.I swear I`ve seen others with the same sceme.

**JQ-72** · 08-09-2006, 11:02 PM

Here you go. I pulled this from a 72 Highlander I got in last week. Column is tight and signal switch works fine. Complete, uncut wiring harness. Levers had a small amount of surface rust in a few spots which came off fine with a Brillo pad. Could use repaint for show quality or looks fine now for driver. $320 (including shipping). Pics aren't great (batt nearly dead) - let me know if you need more.
Joshua

72freak · 08-10-2006, 09:19 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=204887

I bought this tilt off the baord a few weels ago and then drug a parts truck home that had a good one in it . This one is still in the box and sitting in my den. $256 plus shipping if you want it.

72highlander · 08-10-2006, 10:44 AM

i know a guy who sells completely restored columns for $395. all new gut's, paint(available in colors), external trim. they are nice. i'd give the extra $100 or so any day. pm me if you are interested and i'll shoot you his #.

**special-K** · 08-10-2006, 09:27 PM

Quote:

Originally Posted by 72highlander

i know a guy who sells completely restored columns for $395. all new gut's, paint(available in colors), external trim. they are nice. i'd give the extra $100 or so any day. pm me if you are interested and i'll shoot you his #.

Is that Gary Terry,the CheyenneSuperman?I bought a sweet saddle one of him a good while back.

vtblazer · 08-10-2006, 09:43 PM

Quote:

Originally Posted by 72highlander

i know a guy who sells completely restored columns for $395. all new gut's, paint(available in colors), external trim.

That'd be pretty cool to get em in exterior colors, all the factory would ever do is black.

72highlander · 08-10-2006, 10:50 PM

special-k, yes it is. i try not to advertise for someone else, but on occassion on something like this i will pass on info. his stuff brings premium mostly, but it is very very nice also.

**kna4977** · 08-10-2006, 10:56 PM

Quote:

Originally Posted by 72highlander

i know a guy who sells completely restored columns for $395. all new gut's, paint(available in colors), external trim. they are nice. i'd give the extra $100 or so any day. pm me if you are interested and i'll shoot you his #.

Okay, I would give $395 for an even decenter one in Medium Blue. How do I get in touch with him?

thanks

**special-K** · 08-11-2006, 07:05 AM

Email:chevysuper@cs-m.com

08-02-2006, 05:44 PM	#1
kna4977 Senior Member Join Date: Jul 2006 Location: Midlothian TX Posts: 481	WTB: Factory 67-72 Truck Tilt Looking to buy a 67-72 Chevy or GMC truck tilt (not van) for a truck with an automatic transmission. Please let me know if you can help me out, and how much your are asking. thanks

08-02-2006, 11:17 PM	#2
Side Show Registered User Join Date: Jun 2005 Location: Phoenix, AZ Posts: 3	Re: WTB: Factory 67-72 Truck Tilt There was one here in the local paper (Phoenix, AZ) last weekend. He wanted $240. Too pricey for me.

08-03-2006, 01:51 PM	#4
Side Show Registered User Join Date: Jun 2005 Location: Phoenix, AZ Posts: 3	Re: WTB: Factory 67-72 Truck Tilt He said it was complete & nice but not refurbished.

08-03-2006, 02:11 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: WTB: Factory 67-72 Truck Tilt Good solid originals, not restored, go for $250-300 around here. Fresh built ones with lots of new parts run about $500.

08-03-2006, 03:38 PM	#6
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: WTB: Factory 67-72 Truck Tilt same here pickmup __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

08-03-2006, 04:20 PM	#7
kna4977 Senior Member Join Date: Jul 2006 Location: Midlothian TX Posts: 481	Re: WTB: Factory 67-72 Truck Tilt I would pay $300 for a decent one.

08-04-2006, 06:10 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WTB: Factory 67-72 Truck Tilt You`ll be looking for a 69/72 column.I`ve had alot of guys swear van columns were truck.So,it helps to sound like you know your stuff around these columns.Not that there`s any crooks thay survive here,you may be looking elsewhere.The guys I`m talking about are swap-meet terds that want to duck`n`run. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-04-2006, 08:29 AM	#9
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: WTB: Factory 67-72 Truck Tilt They come up on the parts board with regular frequency. Check the parts section everyday and you'll soon score one. Most everybody knows what they are and what their worth, if you find a decent one for 250/300, IMO buy it. Last one I got was in a parts truck I paid $200.00 for but had to drive 3hrs each way to get it.

08-04-2006, 10:39 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WTB: Factory 67-72 Truck Tilt Heh heh,once I discovered the tilts came in trucks I wanted one bad.I saw a`71 longbed for sale for $600,pretty solid.I believe it was in the mid-80s.I bought the truck,swapped columns and sold the truck to this guy for $800 because he really liked the paint.It was Hugger Orange w/black stripe down the side that got wider in the rear,then turned up to the top of the bed.I swear I`ve seen others with the same sceme. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-09-2006, 11:02 PM	#11
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,628	Re: WTB: Factory 67-72 Truck Tilt Here you go. I pulled this from a 72 Highlander I got in last week. Column is tight and signal switch works fine. Complete, uncut wiring harness. Levers had a small amount of surface rust in a few spots which came off fine with a Brillo pad. Could use repaint for show quality or looks fine now for driver. $320 (including shipping). Pics aren't great (batt nearly dead) - let me know if you need more. Joshua Attached Images

08-10-2006, 09:19 AM	#12
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: WTB: Factory 67-72 Truck Tilt http://67-72chevytrucks.com/vboard/s...d.php?t=204887 I bought this tilt off the baord a few weels ago and then drug a parts truck home that had a good one in it . This one is still in the box and sitting in my den. $256 plus shipping if you want it.

08-10-2006, 10:44 AM	#13
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: WTB: Factory 67-72 Truck Tilt i know a guy who sells completely restored columns for $395. all new gut's, paint(available in colors), external trim. they are nice. i'd give the extra $100 or so any day. pm me if you are interested and i'll shoot you his #. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

08-10-2006, 10:50 PM	#16
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: WTB: Factory 67-72 Truck Tilt special-k, yes it is. i try not to advertise for someone else, but on occassion on something like this i will pass on info. his stuff brings premium mostly, but it is very very nice also. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

08-11-2006, 07:05 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WTB: Factory 67-72 Truck Tilt Email:chevysuper@cs-m.com __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.