Custom full dash pad with 3 gauge holes - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69_hafton · 08-03-2006, 08:17 PM

I ran across this while looking at a dash restorer for one of my other projects. First impression was that it's not quite my style, but it could grow on me.

http://www.justdashes.com/Installs.htm

Longhorn Man · 08-03-2006, 09:26 PM

Did you get a load of the price?
They teased us with it for about 2 years before actually making it, then when they did make it, no one can afford it.

72freak · 08-03-2006, 09:36 PM

yep............this product proved that smoking crack is harmfull. The people in charge of this neat item definatly need to stop sucking the glass pipe!!!!!

It should be about a $150 to $200 item. They are trying to re-coup their tooling fees with the first 10 sales. It might take a lifetime to sell 10 of them at that price!!!

ohmsc10 · 08-03-2006, 10:10 PM

I want 1 for my air ride gauges but is way too pricey for me. I also love the way it goes to the windshield.

70c10 · 08-03-2006, 10:33 PM

I'm not crazy about the way it hangs over like a shelf and has squared corners.

**special-K** · 08-03-2006, 10:38 PM

Just stupid.What gauges would you even put in there?I`d rather put custom gauges in the 7 holes that are provided from the factory.

69_hafton · 08-03-2006, 10:51 PM

Longhorn, didn't see a price - guess I don't want to? I need A/C way before I overspend on a dash pad. Just thought it might be a good way to cover up what the sun has done in front of my existing dash.

steveo10 · 08-03-2006, 11:12 PM

how much are they? i like it and wanted one for my air ride gauges but i could never find a price and the way it sounds they are too much.

*Shane* · 08-03-2006, 11:56 PM

They are almost as much as your entire air system ... bags and all.

pumpkin · 08-04-2006, 12:18 AM

I like it, but for that kinda money I could make my own the way I want.

onetoncrewcab · 08-04-2006, 12:28 AM

I see the company is in Van Nuys. I just happen to be in Van Nuys until Tuesday. I should check these out if I get time....which I doubt I'll make it. I like the look of them, but I would like it better without the gauges. Having the pad going all the way to the windshield makes the dash look "finished" IMO.
Mike

1971custom · 08-04-2006, 12:51 AM

whats the price on one of these

ThatOneBlue67 · 08-04-2006, 12:54 AM

One million dollars.

JameslovesJammie · 08-04-2006, 02:01 AM

Quote:

Originally Posted by ohmsc10

I also love the way it goes to the windshield.

Interesting...that's exactly what I don't like about it. It looks really 80's to me.

Longhorn Man · 08-04-2006, 04:55 AM

I want to say it was 3 or 4 hundred
going to the dash like that will cause some seriousely nasty reflections in the glass. Your dash is supposed to be painted with flat paint up there on top of the dash.
I agree that it looks stupid, but I've been flamed for saying that, so I'll leave my comments out... I won't say anything about the 7 holes from the factory.

**special-K** · 08-04-2006, 05:12 AM

Anyone that needs more than seven holes...
Looks like more foam`n`vinyl to crack`n`peel.

bryanw1968 · 08-04-2006, 11:56 AM

Looks a little "fart-tube-ish" to me

Reminds me of the little ricers running around town with mis matched body panels. ha!

**CMars45000** · 08-04-2006, 12:59 PM

Quote:

Originally Posted by 1971custom

whats the price on one of these

you can get them from Brothers for $299

I will be getting one to house the boost, oil temp and tranny temp gauges when I go to a turbo-boosted 355...

http://brothersonlinestore.com/prodi...number=PAD6772

67chevemall · 08-04-2006, 01:05 PM

Quote:

Originally Posted by CMars45000

you can get them from Brothers for $299

I will be getting one to house the boost, oil temp and tranny temp gauges when I go to a turbo-boosted 355...

http://brothersonlinestore.com/prodi...number=PAD6772

start a thread on that one when it happens. Keep us posted...

Orange · 08-04-2006, 01:11 PM

Quote:

Originally Posted by ThatOneBlue67

One million dollars.

Why oh why did that make me laugh so hard?

**CMars45000** · 08-04-2006, 01:30 PM

Quote:

Originally Posted by 67chevemall

start a thread on that one when it happens. Keep us posted...

Oh I will...I've got the turbo (Turbonetics T-72) but not the cash flow right now to build a motor that will hold up to it. So I am finishing up a moderate 327 that will last me until I get the small fortune worth of parts for the turbo motor...

gringoloco · 10-06-2006, 02:00 AM

Anyone have any more pictures of one of these installed?

al's71gmc · 10-06-2006, 05:01 AM

A board member had a truck for sale with this in it a while back. Maybe Texascowboy?? It was a red exterior/white/blue interior truck. Not sure what gauges he had in it.

08-03-2006, 08:17 PM	#1
69_hafton Sleep-Deprived Join Date: Sep 2002 Location: Tulsa, Oklahoma Posts: 445	Custom full dash pad with 3 gauge holes I ran across this while looking at a dash restorer for one of my other projects. First impression was that it's not quite my style, but it could grow on me. http://www.justdashes.com/Installs.htm Attached Images __________________ 1971 K/10 Long Fleetside 350/350 - 6" Lift 1969 C/10 SWB 292 - Sold It

08-03-2006, 09:26 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Custom full dash pad with 3 gauge holes Did you get a load of the price? They teased us with it for about 2 years before actually making it, then when they did make it, no one can afford it.

08-03-2006, 09:36 PM	#3
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Custom full dash pad with 3 gauge holes yep............this product proved that smoking crack is harmfull. The people in charge of this neat item definatly need to stop sucking the glass pipe!!!!! It should be about a $150 to $200 item. They are trying to re-coup their tooling fees with the first 10 sales. It might take a lifetime to sell 10 of them at that price!!!

08-03-2006, 10:10 PM	#4
ohmsc10 Registered User Join Date: Feb 2006 Location: Hanover PA Posts: 24	Re: Custom full dash pad with 3 gauge holes I want 1 for my air ride gauges but is way too pricey for me. I also love the way it goes to the windshield. __________________ 71 Bagged Longbed

08-03-2006, 10:33 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Custom full dash pad with 3 gauge holes I'm not crazy about the way it hangs over like a shelf and has squared corners. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-03-2006, 10:38 PM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Custom full dash pad with 3 gauge holes Just stupid.What gauges would you even put in there?I`d rather put custom gauges in the 7 holes that are provided from the factory. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-03-2006, 10:51 PM	#7
69_hafton Sleep-Deprived Join Date: Sep 2002 Location: Tulsa, Oklahoma Posts: 445	Re: Custom full dash pad with 3 gauge holes Longhorn, didn't see a price - guess I don't want to? I need A/C way before I overspend on a dash pad. Just thought it might be a good way to cover up what the sun has done in front of my existing dash. __________________ 1971 K/10 Long Fleetside 350/350 - 6" Lift 1969 C/10 SWB 292 - Sold It

08-03-2006, 11:12 PM	#8
steveo10 Registered User Join Date: Jan 2006 Location: central indiana Posts: 128	Re: Custom full dash pad with 3 gauge holes how much are they? i like it and wanted one for my air ride gauges but i could never find a price and the way it sounds they are too much.

08-03-2006, 11:56 PM	#9
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Custom full dash pad with 3 gauge holes They are almost as much as your entire air system ... bags and all.

08-04-2006, 12:18 AM	#10
pumpkin Registered User Join Date: Apr 2006 Location: East Sooke B.C. Canada Posts: 543	Re: Custom full dash pad with 3 gauge holes I like it, but for that kinda money I could make my own the way I want.

08-04-2006, 12:28 AM	#11
onetoncrewcab One of my kids. Cute eh? Join Date: Oct 2001 Location: Mitchell, SD Posts: 1,286	Re: Custom full dash pad with 3 gauge holes I see the company is in Van Nuys. I just happen to be in Van Nuys until Tuesday. I should check these out if I get time....which I doubt I'll make it. I like the look of them, but I would like it better without the gauges. Having the pad going all the way to the windshield makes the dash look "finished" IMO. Mike __________________ If a kid asks where rain comes from, I think a cute thing to tell him is “God is crying.” And if he asks why God is crying, another cute thing to tell him is “Probably because of something you did. John 3:16 2006 Chevy HHR 2000 Dodge Durango 1985 Jeep CJ-7 1970 Chevy Pickup

08-04-2006, 12:51 AM	#12
1971custom Registered User Join Date: Apr 2005 Location: south west nebraska Posts: 244	Re: Custom full dash pad with 3 gauge holes whats the price on one of these __________________

08-04-2006, 12:54 AM	#13
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: Custom full dash pad with 3 gauge holes One million dollars. __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968.

08-04-2006, 04:55 AM	#15
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Custom full dash pad with 3 gauge holes I want to say it was 3 or 4 hundred going to the dash like that will cause some seriousely nasty reflections in the glass. Your dash is supposed to be painted with flat paint up there on top of the dash. I agree that it looks stupid, but I've been flamed for saying that, so I'll leave my comments out... I won't say anything about the 7 holes from the factory.

08-04-2006, 05:12 AM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Custom full dash pad with 3 gauge holes Anyone that needs more than seven holes... Looks like more foam`n`vinyl to crack`n`peel. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

08-04-2006, 11:56 AM	#17
bryanw1968 Senior Member Join Date: Jul 2006 Location: Leander, Texas Posts: 850	Re: Custom full dash pad with 3 gauge holes Looks a little "fart-tube-ish" to me Reminds me of the little ricers running around town with mis matched body panels. ha!

10-06-2006, 02:00 AM	#22
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Custom full dash pad with 3 gauge holes Anyone have any more pictures of one of these installed? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-06-2006, 05:01 AM	#23
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: Custom full dash pad with 3 gauge holes A board member had a truck for sale with this in it a while back. Maybe Texascowboy?? It was a red exterior/white/blue interior truck. Not sure what gauges he had in it. __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

Register or Log In To remove these advertisements.