WTB- NOS moldings 69-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72highlander · 08-11-2006, 07:53 PM

want to buy any or all nos upper and lower moldings for 69-72 short fleetside with black lowers. would also be interested in any other NOS outside trim pieces.

**HOTFUN** · 08-11-2006, 11:04 PM

I have all the NOS black lower wide mouldiings in unopened GM paper packaging in a box from the dealer in 1980. They have been properly stored in my attic and never beat around. I bought them for my 71 fleetside shortbox. There is 12 mouldings total for both sides. There probably was body clips in those packages back in those days too. $450. plus shipping.

72highlander · 08-12-2006, 12:10 AM

i'll take them. let me know how you want payment. i can paypal you asap if you have an account or let me know otherwise. thanks! frank

p.s. it says you are an nos parts junkie, what other stuff you got?

**HOTFUN** · 08-12-2006, 12:21 AM

Frank, Let me get them out this weekend and I'll get back with you on figuring out a safe way to box and ship these. I can get them sent out Monday. I'll PM you with all the part #'s and paypal info then. Thanks, Mark

**HOTFUN** · 08-12-2006, 12:24 AM

I would also trade this set for a complete set of used 59 fleetside box chrome! What a deal, 8 used pieces for 12 NOS pieces.
Mark

72highlander · 08-12-2006, 12:48 AM

HOTFUN--don't trade them, i want them! i'll keep my eyes peeled for you some for your 59. i know where a few are at. i don't know those trucks well, what do they look like?

72highlander · 08-12-2006, 12:49 AM

i still would like to buy uppers if anyone has any.

**uncle** · 08-12-2006, 10:17 AM

I have a guy's # that had the upper for about the same price, but I'll have to find his # again.

**HOTFUN** · 08-12-2006, 12:16 PM

Frank, the set is for you and that offer was directed only to you. If you do know of any 59 box stainless which is the stainless trim around the rocket bulge on a 58 - 59 fleetside box "I WANT IT". It can be off a short or long box and it consists of a die cast "V" shaped piece at the front edge, an upper and lower stainless long moulding and then a scallop die cast piece at the rear just ahead of the tail light bezel. I can restore the stainless if it is not too too smashed and if it doesn't have screw holes from a previous reattachment. And the die cast pieces rechromed if they are not to badly pitted or damaged. Please keep an eye out. Thanks, Mark

72highlander · 08-12-2006, 04:17 PM

uncle-let me know if you find that #. thanks!

72highlander · 08-12-2006, 04:22 PM

also would like upper and lower tailgate moldings NOS.

72highlander · 08-13-2006, 01:15 AM

ttt

**HOTFUN** · 08-13-2006, 03:07 PM

Here's the boxed set of 12. Sent you a PM for further instructions.
Thanks.

72highlander · 08-13-2006, 04:11 PM

sent pm, mark, thanks!!!!

08-11-2006, 07:53 PM	#1
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	WTB- NOS moldings 69-72 want to buy any or all nos upper and lower moldings for 69-72 short fleetside with black lowers. would also be interested in any other NOS outside trim pieces. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

08-11-2006, 11:04 PM	#2
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,144	Re: WTB- NOS moldings 69-72 I have all the NOS black lower wide mouldiings in unopened GM paper packaging in a box from the dealer in 1980. They have been properly stored in my attic and never beat around. I bought them for my 71 fleetside shortbox. There is 12 mouldings total for both sides. There probably was body clips in those packages back in those days too. $450. plus shipping. __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-12-2006, 12:10 AM	#3
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: WTB- NOS moldings 69-72 i'll take them. let me know how you want payment. i can paypal you asap if you have an account or let me know otherwise. thanks! frank p.s. it says you are an nos parts junkie, what other stuff you got? __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6 Last edited by 72highlander; 08-12-2006 at 12:14 AM.

08-12-2006, 12:21 AM	#4
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,144	Re: WTB- NOS moldings 69-72 Frank, Let me get them out this weekend and I'll get back with you on figuring out a safe way to box and ship these. I can get them sent out Monday. I'll PM you with all the part #'s and paypal info then. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed" Last edited by HOTFUN; 08-12-2006 at 12:22 AM.

08-12-2006, 12:24 AM	#5
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,144	Re: WTB- NOS moldings 69-72 I would also trade this set for a complete set of used 59 fleetside box chrome! What a deal, 8 used pieces for 12 NOS pieces. Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-12-2006, 12:48 AM	#6
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: WTB- NOS moldings 69-72 HOTFUN--don't trade them, i want them! i'll keep my eyes peeled for you some for your 59. i know where a few are at. i don't know those trucks well, what do they look like? __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

08-12-2006, 12:49 AM	#7
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: WTB- NOS moldings 69-72 i still would like to buy uppers if anyone has any. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

08-12-2006, 10:17 AM	#8
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: WTB- NOS moldings 69-72 I have a guy's # that had the upper for about the same price, but I'll have to find his # again.

08-12-2006, 12:16 PM	#9
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,144	Re: WTB- NOS moldings 69-72 Frank, the set is for you and that offer was directed only to you. If you do know of any 59 box stainless which is the stainless trim around the rocket bulge on a 58 - 59 fleetside box "I WANT IT". It can be off a short or long box and it consists of a die cast "V" shaped piece at the front edge, an upper and lower stainless long moulding and then a scallop die cast piece at the rear just ahead of the tail light bezel. I can restore the stainless if it is not too too smashed and if it doesn't have screw holes from a previous reattachment. And the die cast pieces rechromed if they are not to badly pitted or damaged. Please keep an eye out. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-12-2006, 04:17 PM	#10
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: WTB- NOS moldings 69-72 uncle-let me know if you find that #. thanks! __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

08-12-2006, 04:22 PM	#11
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: WTB- NOS moldings 69-72 also would like upper and lower tailgate moldings NOS. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

08-13-2006, 01:15 AM	#12
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: WTB- NOS moldings 69-72 ttt __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

08-13-2006, 03:07 PM	#13
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,144	Re: WTB- NOS moldings 69-72 Here's the boxed set of 12. Sent you a PM for further instructions. Thanks. Attached Images __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

08-13-2006, 04:11 PM	#14
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: WTB- NOS moldings 69-72 sent pm, mark, thanks!!!! __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.