|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-10-2002, 04:33 PM
|
#1 |
|
2 tons of fun
Join Date: Dec 2001
Location: Central, Ca
Posts: 194
|
Adjusting idle mixture screws on 1406
Hey guys,
I can't remember the procedure for adjusting the idle mixture screws on an edelbrock 1406 carb. I remember seeing the directions on the edelbrock site but can't find it now. Any help is appreciated.....Lumpy
__________________
67 Chevy,Short/Fleet,350,Saginaw 4-Speed,Lowered 4x2,small window,P/S,Edelbrock Intake/Carb,HEI,Gear Drive,Crane Cam 274H Three Rivers, Ca Pics at: http://www.cardomain.com/id/lumpy454 |
|
|
|
08-10-2002, 04:53 PM
|
#2 |
|
2 tons of fun
Join Date: Dec 2001
Location: Central, Ca
Posts: 194
|
I found the info on edelbrocks site finally. Does about 2 turns out on each screw sound about right? I had a pretty bad hesitation before from an idle to a hard acceleration. I just readjusted the screws and the hesitation is almost totally gone Thanks.
__________________
67 Chevy,Short/Fleet,350,Saginaw 4-Speed,Lowered 4x2,small window,P/S,Edelbrock Intake/Carb,HEI,Gear Drive,Crane Cam 274H Three Rivers, Ca Pics at: http://www.cardomain.com/id/lumpy454 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
