Shrader valves ... where to buy? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Shane* · 08-28-2006, 10:29 PM

Where did you guys find them ... I need a few for a temporary fix ... gotta move a bagged truck that isn't plumbed or wired.

Thanks gang.

EyeH8the24 · 08-28-2006, 10:32 PM

i got mine a big rig parts place...

71swb4x4 · 08-28-2006, 10:34 PM

I bought mine at the local Car Quest. The farm supply store has them too.

Alvin · 08-28-2006, 10:39 PM

DO NOT DRIVE ON THIS. YOU COULD KILL YOURSELF OR A BUS FULL OF ORPHANS

I walked into Wal-mart's tire dept. and said I needed two used valve stems. The guy reached in the box and handed me two brand new ones. I said thanks and walked out.

Came home and tried to cut as much of the rubber off the bottom as possible. Then I removed the valve cores and burned off the remaining rubber with a torch. Let them cool and scuffed them with a bit of sandpaper.

What I was left with was just about a perfect fit for 3/8" air line. I heated the valve stem (core removed still) and inserted it in the line and squeezed the air line onto the hot valve stem. Reinstalled the valve core and tried them out. They seemed to hold air pretty well then, and this was back at the beginning of June. My airbags are still holding up my empty frame today. Haven't added a single bit of air since June, and I can't tell any difference.

I'm not sure how well it would work with the higher pressures that are needed to raise a *more* complete truck, but it was free and it's pretty hard to beat that price.

*edit* went down to the garage to get a picture of what I ended up with.

hotrodhomi · 08-28-2006, 11:21 PM

^^^ this might be OK for getting your truck from one end of the shop to the other , but there is no way I would drive on that.

camaro__thunder · 08-29-2006, 12:43 AM

Oreilly Auto Parts has the male threaded ones for around $2...

Alvin · 08-29-2006, 08:26 AM

Oh yeah, sorry. Never meant for it to sound like I endorsed driving on them. As far as I can remember Shane's truck isn't driveable just yet, so I didn't think to mention that. That is just my rigged way of being able to get my frame up out of my basement level garage, aired out there's no chance of it making it up the hill. I would never drive on that either.

*Shane* · 08-29-2006, 03:57 PM

Thanks gang. I will check with O'Reilly's.

svgould · 08-29-2006, 04:28 PM

Ace Hardware also carries them!!

*Shane* · 08-30-2006, 09:39 AM

found them at O'Reilly's here locally. They are called Tank Valves with 1/8" NPT threads. $1.99 each ... link below.

Tank Valve

08-28-2006, 10:29 PM	#1
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Shrader valves ... where to buy? Where did you guys find them ... I need a few for a temporary fix ... gotta move a bagged truck that isn't plumbed or wired. Thanks gang.

08-28-2006, 10:32 PM	#2
EyeH8the24 Registered User Join Date: Dec 2004 Location: beulah,alabama Posts: 1,075	Re: Shrader valves ... where to buy? i got mine a big rig parts place...

08-28-2006, 10:34 PM	#3
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Shrader valves ... where to buy? I bought mine at the local Car Quest. The farm supply store has them too. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-28-2006, 10:39 PM	#4
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Shrader valves ... where to buy? DO NOT DRIVE ON THIS. YOU COULD KILL YOURSELF OR A BUS FULL OF ORPHANS I walked into Wal-mart's tire dept. and said I needed two used valve stems. The guy reached in the box and handed me two brand new ones. I said thanks and walked out. Came home and tried to cut as much of the rubber off the bottom as possible. Then I removed the valve cores and burned off the remaining rubber with a torch. Let them cool and scuffed them with a bit of sandpaper. What I was left with was just about a perfect fit for 3/8" air line. I heated the valve stem (core removed still) and inserted it in the line and squeezed the air line onto the hot valve stem. Reinstalled the valve core and tried them out. They seemed to hold air pretty well then, and this was back at the beginning of June. My airbags are still holding up my empty frame today. Haven't added a single bit of air since June, and I can't tell any difference. I'm not sure how well it would work with the higher pressures that are needed to raise a more complete truck, but it was free and it's pretty hard to beat that price. edit went down to the garage to get a picture of what I ended up with. Attached Images __________________ Ethel - The Legend Continues... Ethel has been sold. Last edited by Alvin; 08-29-2006 at 08:31 AM. Reason: added death warnings and disclaimers

08-28-2006, 11:21 PM	#5
hotrodhomi Registered User Join Date: Apr 2004 Location: Sacramento Posts: 3,737	Re: Shrader valves ... where to buy? ^^^ this might be OK for getting your truck from one end of the shop to the other , but there is no way I would drive on that. __________________ '72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht

08-29-2006, 12:43 AM	#6
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: Shrader valves ... where to buy? Oreilly Auto Parts has the male threaded ones for around $2... __________________ My Project 69 SWB SHAVED BAGGED DOORED

08-29-2006, 08:26 AM	#7
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Shrader valves ... where to buy? Oh yeah, sorry. Never meant for it to sound like I endorsed driving on them. As far as I can remember Shane's truck isn't driveable just yet, so I didn't think to mention that. That is just my rigged way of being able to get my frame up out of my basement level garage, aired out there's no chance of it making it up the hill. I would never drive on that either. __________________ Ethel - The Legend Continues... Ethel has been sold.

08-29-2006, 03:57 PM	#8
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Shrader valves ... where to buy? Thanks gang. I will check with O'Reilly's.

08-29-2006, 04:28 PM	#9
svgould Active Member Join Date: Jul 2003 Location: Boise Idaho Posts: 296	Re: Shrader valves ... where to buy? Ace Hardware also carries them!! __________________ 1971 SWB SOLD LT1 motor / 4l60E transmission ECE front dropped spindles with stock height springs 4" rear springs Coys Wheels 18 x 8 all the way around Hydratech hydroboost brake system

08-30-2006, 09:39 AM	#10
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Shrader valves ... where to buy? found them at O'Reilly's here locally. They are called Tank Valves with 1/8" NPT threads. $1.99 each ... link below. Tank Valve



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.