Who makes the A/C Firewall Hole cover up thingy? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 10-02-2006, 09:21 PM

I'm getting rid of all the A/C and Heater stuff on the blazer. Other than cutting and welding a smooth firewall, does anybody make something to cover up those holes?

I know something along the line of what I'm looking for Vintage Air makes, but I think it's got that big square thing for the lines to come out.

**KSCHEVYUP** · 10-02-2006, 10:07 PM

yellow69-check out this guy on ebay; maybe he can help you? Item #150040724611 KSCHEVYUP

5150 · 10-02-2006, 10:52 PM

I emailed him, but he only has non A/C cab stuff

cdowns · 10-02-2006, 11:23 PM

too bad you dont know somebody with inagination and minimal fabrication skills.

5150 · 10-02-2006, 11:34 PM

how about minimal Imagination skills, but a site supporter?

nu2-72 · 10-03-2006, 07:49 AM

How about someone that has done the mod with a Vintage Air or Old Air kit. I thought that they came with either a template or the actual plate in the kit. Could someone trace the plate or copy the template and mail one? I have written both companies asking to purchase the plate (in plastic I believe) so that I could fab stainless but neither will reply. I hope the lack of reply now does not indicate future response should I buy their product.

Orange · 10-03-2006, 08:13 AM

Something like so?
http://www.slickorange.com/Album/ima...gmc_image1.jpg
http://www.slickorange.com/ac2/images/acip_image3.jpg
Those two are before I knicked the end off...it looks a lot better after.
http://www.slickorange.com/ac2/images/acip_image13.jpg
http://www.slickorange.com/ac2/images/acip_image14.jpg

I can't say that I could get you one. If you are dead serious though, and like it just like it is (in the first two pics) I can try.
You can also make one yourself. All I did was make a template out of cardboard (several thin pieces) and then I had that cut out of steel.
You could do the same, just transfer the template to steel, and speedy-cut or sawzall it out (I've done similar - just leave some room to clean up the edges). PM me though if you have any other questions.

meathead95 · 10-03-2006, 10:06 AM

if you want to bring it down i could help you.

extd56 · 10-03-2006, 11:46 AM

I called old air and they sent me the plates for the firewall. I believe it was about 20.00. I told them I was mocking up the cab and would get the rest of the system later. Talk to the tech people. They will deduct the plate when you buy the rest of the system.

5150 · 10-03-2006, 01:38 PM

Well, I'm not going to buy the rest of the system though. I'll call them and ask if they will sell the plates by themselves.

Hey Keith-I'll keep that in mind. I'd rather you come and see me though, instead of having to drag that bad boy down there. I'm too far away from that now to think that far in advance.

This is my inspiration blazer-http://www.classictrucks.com/features/0508cl_1972_chevy_blazer/

NO Heater
NO A/C
NO TOP
NO WINDOWS

SHAVE EVERYTHING!!!!!!!!

shifty · 10-03-2006, 02:15 PM

Hey Bri, I bought some construction paper the other day to make a template for mine this week. I can mail you the template or something afterwards, but my dash looks exactly like the one in the eBay auction above (it is non-A/C truck according to the glove box)

5150 · 10-03-2006, 05:16 PM

I have an A/C cab though.

shifty · 10-03-2006, 05:22 PM

DOH.

Is the outline different on an AC versus non AC cab? I mean, I know the holes are different shapes, but is the actual general outline of it diff't?

10-02-2006, 10:07 PM	#2
KSCHEVYUP Senior Member Join Date: Nov 2003 Location: NEAR MARYSVILLE,KANSAS 66508 Posts: 471	Re: Who makes the A/C Firewall Hole cover up thingy? yellow69-check out this guy on ebay; maybe he can help you? Item #150040724611 KSCHEVYUP __________________ 1972 C30 Cheyenne Super 1971 C10 (Parts truck)

10-02-2006, 10:52 PM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Who makes the A/C Firewall Hole cover up thingy? I emailed him, but he only has non A/C cab stuff __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-02-2006, 11:23 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Who makes the A/C Firewall Hole cover up thingy? too bad you dont know somebody with inagination and minimal fabrication skills. __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-02-2006, 11:34 PM	#5
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Who makes the A/C Firewall Hole cover up thingy? how about minimal Imagination skills, but a site supporter? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 10-02-2006 at 11:48 PM.

10-03-2006, 07:49 AM	#6
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: Who makes the A/C Firewall Hole cover up thingy? How about someone that has done the mod with a Vintage Air or Old Air kit. I thought that they came with either a template or the actual plate in the kit. Could someone trace the plate or copy the template and mail one? I have written both companies asking to purchase the plate (in plastic I believe) so that I could fab stainless but neither will reply. I hope the lack of reply now does not indicate future response should I buy their product. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

10-02-2006, 09:21 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Who makes the A/C Firewall Hole cover up thingy? I'm getting rid of all the A/C and Heater stuff on the blazer. Other than cutting and welding a smooth firewall, does anybody make something to cover up those holes? I know something along the line of what I'm looking for Vintage Air makes, but I think it's got that big square thing for the lines to come out. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-03-2006, 08:13 AM	#7
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Who makes the A/C Firewall Hole cover up thingy? Something like so? http://www.slickorange.com/Album/ima...gmc_image1.jpg http://www.slickorange.com/ac2/images/acip_image3.jpg Those two are before I knicked the end off...it looks a lot better after. http://www.slickorange.com/ac2/images/acip_image13.jpg http://www.slickorange.com/ac2/images/acip_image14.jpg I can't say that I could get you one. If you are dead serious though, and like it just like it is (in the first two pics) I can try. You can also make one yourself. All I did was make a template out of cardboard (several thin pieces) and then I had that cut out of steel. You could do the same, just transfer the template to steel, and speedy-cut or sawzall it out (I've done similar - just leave some room to clean up the edges). PM me though if you have any other questions. __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

10-03-2006, 10:06 AM	#8
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Who makes the A/C Firewall Hole cover up thingy? if you want to bring it down i could help you. __________________ 72 2wd blazer 72 swb 4x4

10-03-2006, 11:46 AM	#9
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Who makes the A/C Firewall Hole cover up thingy? I called old air and they sent me the plates for the firewall. I believe it was about 20.00. I told them I was mocking up the cab and would get the rest of the system later. Talk to the tech people. They will deduct the plate when you buy the rest of the system.

10-03-2006, 01:38 PM	#10
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Who makes the A/C Firewall Hole cover up thingy? Well, I'm not going to buy the rest of the system though. I'll call them and ask if they will sell the plates by themselves. Hey Keith-I'll keep that in mind. I'd rather you come and see me though, instead of having to drag that bad boy down there. I'm too far away from that now to think that far in advance. This is my inspiration blazer-http://www.classictrucks.com/features/0508cl_1972_chevy_blazer/ NO Heater NO A/C NO TOP NO WINDOWS SHAVE EVERYTHING!!!!!!!! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 10-03-2006 at 01:40 PM.

10-03-2006, 02:15 PM	#11
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Who makes the A/C Firewall Hole cover up thingy? Hey Bri, I bought some construction paper the other day to make a template for mine this week. I can mail you the template or something afterwards, but my dash looks exactly like the one in the eBay auction above (it is non-A/C truck according to the glove box) __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

10-03-2006, 05:16 PM	#12
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Who makes the A/C Firewall Hole cover up thingy? I have an A/C cab though. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

10-03-2006, 05:22 PM	#13
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Who makes the A/C Firewall Hole cover up thingy? DOH. Is the outline different on an AC versus non AC cab? I mean, I know the holes are different shapes, but is the actual general outline of it diff't? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 10-03-2006 at 05:23 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.