10-10-2006, 05:04 AM | #1 |
Registered User
Join Date: Oct 2006
Location: Oakland Ca
Posts: 2
|
1971 Chevy C-10
Greetings
I have a 1971 Chevy C-10 short bed fleetside 250 ci 6 cylinder, wood bed. I bought the truck in 1983 with [77,000] miles,now it has [465,761 miles] [original engine/no rebuild] . It still runs great on the flat [freeway] but has no power to climb hills. In 1984 I changed it to dual exhaust, from 3 on the column to 4 on the floor with a 3/4 ton transmission [compound low] and in 1998 I put in a positraction rearend. Because the rearend was 6 bolt, I changed the front drums also, over to 6 bolt, allowing me to run it with 9.50 x 16.5 tires. This has been one great truck I have driven it all over the western United States,Canada and Mexico. With allways enough power to get me anywhere I wanted, plus I used it for my hauling business and fully loaded it performed any job demanded of it. I also drove it for years on dirt roads [and what could be hardly called a road] off the grid, in wilderness areas, like the Baja in Mexico and thru mountains and deserts under extreme weather conditions. Because of the headers, it allways sounded like it had a 350 in it and over the years, everyone was all ways amazed that it only had a 250. I allways imagined that it would be with me until the day I died. Because of the rising gas prices [San Francisco 3 weeks ago $3.79 a gallon] and the negative impact, fossil fuels have on our environment I bought a diesel truck [1985 Ford f250 extended cab utility body 6.9 Intenational Harvester engine IDI] which I run on homebrew biodiesel and WVO [waste vegetable oil].So instead of it costing me $300 or more a month to get around it costs me no more than $10. I am a backyard/street mechanic and I am also proficient in auto body repair, custom paint and fabrication.I am going to restore my truck for sale and I am looking for a word up [the engine also has a rear seal leak and I have to add a quart of oil a week]. I could either rebuild the 250 engine [better mpg] or upgrade to a 350 which it seems, that is the engine, that most people seem to prefer,what do you all think? Not to abandon my life long admiration/love for Chevy/GMC, [before purchasing the C-10] I drove a 1952 GMC Suburban for 10 years [stolen, never recovered].For the past year [with 2 of my friends] we have been restoring a 1974 El Camino SS where we swapped out the 350 gas engine for a 1986 6.2 truck diesel, turbo charged [Banks sidewinder], propane injected to race on biodiesel on our local tracks.The 6.2 is a perfect fit but because it's even heavier than a 454 we beefed up the front suspension and braking system installing all racing parts.We will have a website up in another month or 2 and you can check out our ride "Grease Runner" at www.alternativefuelstechnology.org. Peace Have a Great Day Motor On |
10-10-2006, 05:10 AM | #2 |
Registered User
Join Date: Oct 2006
Location: Oakland Ca
Posts: 2
|
1971 Chevy C-10
Greetings
I have a 1971 Chevy C-10 short bed fleetside 250 ci 6 cylinder, wood bed. I bought the truck in 1983 with [77,000] miles,now it has [465,761 miles] [original engine/no rebuild] . It still runs great on the flat [freeway] but has no power to climb hills. In 1984 I changed it to dual exhaust, from 3 on the column to 4 on the floor with a 3/4 ton transmission [compound low] and in 1998 I put in a positraction rearend. Because the rearend was 6 bolt, I changed the front drums also, over to 6 bolt, allowing me to run it with 9.50 x 16.5 tires. This has been one great truck I have driven it all over the western United States,Canada and Mexico. With allways enough power to get me anywhere I wanted, plus I used it for my hauling business and fully loaded it performed any job demanded of it. I also drove it for years on dirt roads [and what could be hardly called a road] off the grid, in wilderness areas, like the Baja in Mexico and thru mountains and deserts under extreme weather conditions. Because of the headers, it allways sounded like it had a 350 in it and over the years, everyone was all ways amazed that it only had a 250. I allways imagined that it would be with me until the day I died. Because of the rising gas prices [San Francisco 3 weeks ago $3.79 a gallon] and the negative impact, fossil fuels have on our environment I bought a diesel truck [1985 Ford f250 extended cab utility body 6.9 Intenational Harvester engine IDI] which I run on homebrew biodiesel and WVO [waste vegetable oil].So instead of it costing me $300 or more a month to get around it costs me no more than $10. I am a backyard/street mechanic and I am also proficient in auto body repair, custom paint and fabrication.I am going to restore my truck for sale and I am looking for a word up [the engine also has a rear seal leak and I have to add a quart of oil a week]. I could either rebuild the 250 engine [better mpg] or upgrade to a 350 which it seems, that is the engine, that most people seem to prefer,what do you all think? Not to abandon my life long admiration/love for Chevy/GMC, [before purchasing the C-10] I drove a 1952 GMC Suburban for 10 years [stolen, never recovered].For the past year [with 2 of my friends] we have been restoring a 1974 El Camino SS where we swapped out the 350 gas engine for a 1986 6.2 truck diesel, turbo charged [Banks sidewinder], propane injected to race on biodiesel on our local tracks.The 6.2 is a perfect fit but because it's even heavier than a 454 we beefed up the front suspension and braking system installing all racing parts.We will have a website up in another month or 2 and you can check out our ride "Grease Runner" at www.alternativefuelstechnology.org. Peace Have a Great Day Motor On Last edited by Lichen; 10-10-2006 at 05:19 AM. Reason: spelling of "International" |
10-10-2006, 09:01 AM | #3 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: 1971 Chevy C-10
Welcome to the board from South Mississippi. If you're gonna sell it, the 350 is the only way to go.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
10-10-2006, 09:07 AM | #4 |
Registered User
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,425
|
Re: 1971 Chevy C-10
I run on homebrew biodiesel and WVO [waste vegetable oil].So instead of it costing me $300 or more a month to get around it costs me no more than $10.
WOW.. YOUR THE FIRST GUY I EVER MET WITH A DARN GOOD EXCUSE FOR GOING TO A NEWER TRUCK WITH A DIESEL. WELCOME TO THE BOARD FROM SOUTHERN KY. SOUNDS LIKE YOU HAVE A WHOLE LOT OF EXPERTISE, & PRACTICAL EXPERIANCE THAT YOURE WILLING TO SHARE. SCREW OPEC!! JOHN
__________________
junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST |
10-10-2006, 08:52 PM | #5 |
Registered User
Join Date: Apr 2003
Location: Central PA....In the Berg of Nisbet
Posts: 790
|
Re: 1971 Chevy C-10
Maybe you could put a grease burner in it and continue to run it
A 6.9 IH...........Been around enough of them, I try to forget about them, but sometimes I have terrible flash backs..........
__________________
'72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!! |
Bookmarks |
|
|