Found a 67 swb for cheap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jimbotronics · 10-14-2006, 08:12 AM

I haven't went and looked at it in person but I'm mostly wanting the bed, my buddy may be able to use some of the other 67 parts on his rebuild. Anyway, guy said I could have it for $500. The wood is gone (to be expected) as well as the tail gate. I can see there are some dents dings and a few creases but can't but over seems to be decent. I asked about rust, he replied about as rust free as you'll find in Florida. That tells me to expect some. The 'ol guy that owns it is super nice to talk to and has hooked me up with a guy to buy some rust free (hopefully) '72 doors from. whatchas think?

Check out the cab corner repair on the ps side... lol

byrd · 10-14-2006, 08:54 AM

For 5-hun it would be mine. You possible could make a couple of dollars off of the parts you don't need.

cdowns · 10-14-2006, 09:49 AM

really looks like a good deal / heck that rear bumper would look great hangin in the garage

msgross · 10-14-2006, 10:00 AM

If I knew that you were looking for a bed I just saw a 72 Step go for $50 (yep, fifty bucks) near my house on Ebay.

PanelDeland · 10-14-2006, 01:00 PM

Jimbo the front license plate ought to be worth that.J/K I would save it though.That bed doesn't look too bad from the pics.Hope it works out for you.

Aarons72s · 10-14-2006, 11:44 PM

Id go for it!
Aaron

shaneschevys · 10-14-2006, 11:58 PM

Well......have you bought it yet??

Jimbotronics · 10-15-2006, 10:30 AM

lol - l left the guy a message letting him know I would take it. It's a few hours away so it'll be a mini trip to go get it.

*72CSTC5* · 10-15-2006, 10:32 AM

You better jump all over that truck. The front clip looks good and the rear fenders are repairable.

Bishops Trucks · 10-15-2006, 10:34 AM

A little paint on that cab corner and you'll never tell it was patched. Buy it!

Jimbotronics · 10-15-2006, 05:23 PM

Well, the ol boy called me back. He said here's the deal - He had also listed the truck in the local paper forsale for a grand. He said he wasn't trying to get more money out of me but if someone shows up with money in hand then he it'd be a done deal. I guess I can't blame here there, I asked about sending him a mo to hold it - he said it's really more about getting it off his property then anything and that's why he offered it at half what he would really like for it. Gonna try to shoot over tuesday afternoon and grab it.

Jimbotronics · 10-17-2006, 09:47 PM

Just got back from my 437 mile round trip to pick the truck up. I was pissed, it's nothing like the photos. There wasn't two square inches of salvagable metal on that truck. Wish I had taken my camera. Looks good from the photos that he provided BUT damn! Guess that's why his camera misterously went kahoots when I ask him for inner fender, interior, and inside bed shots. To make matters worse he had put me touch with a friend of his (30 mins further up the road) that said he had a good driver side 72 door and header panel. I get there and the guy had like at least twelve 67-72 chevy trucks in his field that had been sitting there for 12-15 years just rotting - I was disgusted. His 'perfect' 72 door ended up being a rusted out 71 down door. The header panel ended up being a rusted out panel for a wood bed even after specifying several times I had a steel bed.

longhorn70gmc · 10-17-2006, 10:08 PM

HANG IN THERE JIMBO!!!! You will find one. I know you could find you one out here in the desert world. Good luck and don't give up. It will happen.
Respectfully

*72CSTC5* · 10-17-2006, 11:14 PM

Damn, dont feel bad, I would have been had too on that one. Looked good from the pics.

Aarons72s · 10-17-2006, 11:32 PM

That sucks! Hope you have better luck next time.
Aaron

10-14-2006, 08:12 AM	#1
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Found a 67 swb for cheap I haven't went and looked at it in person but I'm mostly wanting the bed, my buddy may be able to use some of the other 67 parts on his rebuild. Anyway, guy said I could have it for $500. The wood is gone (to be expected) as well as the tail gate. I can see there are some dents dings and a few creases but can't but over seems to be decent. I asked about rust, he replied about as rust free as you'll find in Florida. That tells me to expect some. The 'ol guy that owns it is super nice to talk to and has hooked me up with a guy to buy some rust free (hopefully) '72 doors from. whatchas think? Check out the cab corner repair on the ps side... lol __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

10-14-2006, 09:49 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Found a 67 swb for cheap really looks like a good deal / heck that rear bumper would look great hangin in the garage __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-14-2006, 10:00 AM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Found a 67 swb for cheap If I knew that you were looking for a bed I just saw a 72 Step go for $50 (yep, fifty bucks) near my house on Ebay.

10-14-2006, 01:00 PM	#5
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: Found a 67 swb for cheap Jimbo the front license plate ought to be worth that.J/K I would save it though.That bed doesn't look too bad from the pics.Hope it works out for you. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

10-14-2006, 11:44 PM	#6
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: Found a 67 swb for cheap Id go for it! Aaron

10-14-2006, 11:58 PM	#7
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Found a 67 swb for cheap Well......have you bought it yet?? __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

10-15-2006, 10:30 AM	#8
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Re: Found a 67 swb for cheap lol - l left the guy a message letting him know I would take it. It's a few hours away so it'll be a mini trip to go get it. __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

10-15-2006, 10:32 AM	#9
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: Found a 67 swb for cheap You better jump all over that truck. The front clip looks good and the rear fenders are repairable.

10-15-2006, 10:34 AM	#10
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: Found a 67 swb for cheap A little paint on that cab corner and you'll never tell it was patched. Buy it! __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

10-15-2006, 05:23 PM	#11
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Re: Found a 67 swb for cheap Well, the ol boy called me back. He said here's the deal - He had also listed the truck in the local paper forsale for a grand. He said he wasn't trying to get more money out of me but if someone shows up with money in hand then he it'd be a done deal. I guess I can't blame here there, I asked about sending him a mo to hold it - he said it's really more about getting it off his property then anything and that's why he offered it at half what he would really like for it. Gonna try to shoot over tuesday afternoon and grab it. __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

10-17-2006, 09:47 PM	#12
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Re: Found a 67 swb for cheap Just got back from my 437 mile round trip to pick the truck up. I was pissed, it's nothing like the photos. There wasn't two square inches of salvagable metal on that truck. Wish I had taken my camera. Looks good from the photos that he provided BUT damn! Guess that's why his camera misterously went kahoots when I ask him for inner fender, interior, and inside bed shots. To make matters worse he had put me touch with a friend of his (30 mins further up the road) that said he had a good driver side 72 door and header panel. I get there and the guy had like at least twelve 67-72 chevy trucks in his field that had been sitting there for 12-15 years just rotting - I was disgusted. His 'perfect' 72 door ended up being a rusted out 71 down door. The header panel ended up being a rusted out panel for a wood bed even after specifying several times I had a steel bed. __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

10-17-2006, 10:08 PM	#13
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Found a 67 swb for cheap HANG IN THERE JIMBO!!!! You will find one. I know you could find you one out here in the desert world. Good luck and don't give up. It will happen. Respectfully __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

10-17-2006, 11:14 PM	#14
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: Found a 67 swb for cheap Damn, dont feel bad, I would have been had too on that one. Looked good from the pics.

10-17-2006, 11:32 PM	#15
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: Found a 67 swb for cheap That sucks! Hope you have better luck next time. Aaron



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.