new truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rancid · 10-19-2006, 11:14 PM

just got a 72 gmc 1/2 ton sierra 2wd, very little rust with a 350 and auto and working air for 350.00. it even has the factory radio. with the money i saved i got me a 67 chevy front clip to convert it. i have always wanted a 67-68, but now i need to convert it to a shortbed as well.

glock35ipsc · 10-19-2006, 11:18 PM

Very cool, congrats! Great price too!

84 400 · 10-19-2006, 11:56 PM

great lets see some pics if you have them

Aarons72s · 10-20-2006, 05:11 AM

Pics please!
Aaron

**Yukon Jack** · 10-20-2006, 10:28 AM

Cool, can't beat that price!

krue · 10-20-2006, 10:31 AM

**Palf70Step** · 10-20-2006, 05:40 PM

rancid · 10-20-2006, 09:22 PM

heres some the 2nd day i had it. i took the shell off, took off the big ugly non stock rear bumper, and got the complete front clip undone, in the morning i will lift off the 72 gmc clip and replace it with a 67 chevy clip. and hopefully start shortening the frame for a shortbed. and mabey i can find a good shordbed to put on it.

pictures turned out crappy, was dark outside.

rancid · 10-21-2006, 08:09 PM

the clip is on, might get the frame shortened in the morning. cant wait to lower and paint this thing, it might just be enough to tie me over till the crewcab 72 is done.

**FRENCHBLUE72** · 10-21-2006, 08:31 PM

Looks like a pretty good deal..

kylejamers · 10-21-2006, 09:21 PM

sweeet

rancid · 10-29-2006, 09:14 PM

its a shortbed now, cut 12 inches of the middle of the frame and 8 inches off the rear, now i need to assemble the bed and get it in black satin and lower it. so i can drive it.

i think its coing along good, oh and i need to install the new rockers and cab corners before it goes into satin black.

*72CSTC5* · 10-29-2006, 09:25 PM

Heck yeah, now you are talking short beds rule!!

**Boog** · 10-29-2006, 09:26 PM

You're making some fast progress there.

**Canadian694x4** · 10-29-2006, 09:33 PM

Wow...Fast Progress And A Great Score For $350!!

rancid · 10-29-2006, 09:36 PM

after its lowered and in satin black, i need to gather up a tbi setup and inject it and install a 4l60e i just picked and hope to get some ok mpg with this setup.

71chevytruckguy · 10-29-2006, 09:39 PM

HOLY COW THAT FAST!! lookin good and great price. chris.

rancid · 11-05-2006, 09:41 PM

its got a bed on it, kinda. i shortened the long bed floor it was in alot better shape than the shortbed floor. just need to finish installing the rear brace and install some wheel wells. its coming together slowly. but it will get done.

LUV2XCLR8 · 11-05-2006, 09:41 PM

rancid · 11-05-2006, 09:43 PM

heres some pics.

action · 11-05-2006, 09:58 PM

Where did you cut the frame? Everyone I have seen they were cut under the cab. looks like you cut between the crossmember and the rear. did you have to move any cab mounts?
Jack

rancid · 11-05-2006, 10:01 PM

i cut it a few inches after the rear cab mounts. im still going to add some inner frame gussets.

action · 11-05-2006, 10:04 PM

I see, It is a leaf spring truck so you were able to cut where you did. You couldn't cut there with a coil spring truck.
Jack

rancid · 11-05-2006, 10:07 PM

i wish it was a leaf sprung truck, eaisier to install bags.

glock35ipsc · 11-05-2006, 11:11 PM

Quote:

Originally Posted by rancid

i wish it was a leaf sprung truck, eaisier to install bags.

Then what are those things??????

10-19-2006, 11:14 PM	#1
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	new truck just got a 72 gmc 1/2 ton sierra 2wd, very little rust with a 350 and auto and working air for 350.00. it even has the factory radio. with the money i saved i got me a 67 chevy front clip to convert it. i have always wanted a 67-68, but now i need to convert it to a shortbed as well.

10-19-2006, 11:18 PM	#2
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: new truck Very cool, congrats! Great price too! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

10-19-2006, 11:56 PM	#3
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,741	Re: new truck great lets see some pics if you have them __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

10-20-2006, 05:11 AM	#4
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: new truck Pics please! Aaron

10-20-2006, 10:28 AM	#5
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: new truck Cool, can't beat that price! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-20-2006, 10:31 AM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: new truck __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-20-2006, 05:40 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,818	Re: new truck __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

10-20-2006, 09:22 PM	#8
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: new truck heres some the 2nd day i had it. i took the shell off, took off the big ugly non stock rear bumper, and got the complete front clip undone, in the morning i will lift off the 72 gmc clip and replace it with a 67 chevy clip. and hopefully start shortening the frame for a shortbed. and mabey i can find a good shordbed to put on it. pictures turned out crappy, was dark outside.

10-21-2006, 08:09 PM	#9
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: new truck the clip is on, might get the frame shortened in the morning. cant wait to lower and paint this thing, it might just be enough to tie me over till the crewcab 72 is done.

10-21-2006, 08:31 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: new truck Looks like a pretty good deal.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-21-2006, 09:21 PM	#11
kylejamers Registered User Join Date: Jun 2006 Location: washington Posts: 133	Re: new truck sweeet

10-29-2006, 09:14 PM	#12
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: new truck its a shortbed now, cut 12 inches of the middle of the frame and 8 inches off the rear, now i need to assemble the bed and get it in black satin and lower it. so i can drive it. i think its coing along good, oh and i need to install the new rockers and cab corners before it goes into satin black.

10-29-2006, 09:25 PM	#13
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: new truck Heck yeah, now you are talking short beds rule!!

10-29-2006, 09:26 PM	#14
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,136	Re: new truck You're making some fast progress there. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

10-29-2006, 09:33 PM	#15
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	Re: new truck Wow...Fast Progress And A Great Score For $350!! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.



Register or Log In To remove these advertisements.

10-29-2006, 09:36 PM	#16
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: new truck after its lowered and in satin black, i need to gather up a tbi setup and inject it and install a 4l60e i just picked and hope to get some ok mpg with this setup.

10-29-2006, 09:39 PM	#17
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: new truck HOLY COW THAT FAST!! lookin good and great price. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

11-05-2006, 09:41 PM	#18
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: new truck its got a bed on it, kinda. i shortened the long bed floor it was in alot better shape than the shortbed floor. just need to finish installing the rear brace and install some wheel wells. its coming together slowly. but it will get done.

11-05-2006, 09:41 PM	#19
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: new truck __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-05-2006, 09:43 PM	#20
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: new truck heres some pics.

11-05-2006, 09:58 PM	#21
action Active Member Join Date: Dec 2005 Location: Valley Springs, Ca. Posts: 266	Re: new truck Where did you cut the frame? Everyone I have seen they were cut under the cab. looks like you cut between the crossmember and the rear. did you have to move any cab mounts? Jack

11-05-2006, 10:01 PM	#22
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: new truck i cut it a few inches after the rear cab mounts. im still going to add some inner frame gussets.

11-05-2006, 10:04 PM	#23
action Active Member Join Date: Dec 2005 Location: Valley Springs, Ca. Posts: 266	Re: new truck I see, It is a leaf spring truck so you were able to cut where you did. You couldn't cut there with a coil spring truck. Jack

11-05-2006, 10:07 PM	#24
rancid Registered User Join Date: Jul 2006 Location: utah Posts: 182	Re: new truck i wish it was a leaf sprung truck, eaisier to install bags.

Register or Log In To remove these advertisements.