86 Silverado - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Curly86 · 10-21-2006, 04:07 AM

I just found a jem of a deal. Found a 86 Silverado SWB with tilt wheel power windows and door locks and a 350 engine in nice condition bought it for $800. It needs both front fenders,which would be better aftermarket fender or junkyard? My ace mechanic is going to put a new rebuilt 400 smallblock in it for me next week I got from my Father in Law. Will post pics when I get a chance

eagle23 · 10-21-2006, 09:20 AM

Welcome to the board!! You'll find lots of nice folks here and even more opinions than you'll know what to do with

I'd go to the salvage yard for body parts. In general, you can't beat GM originals. Be sure to check for rust, etc...the obvious. Sometimes ebay has some deals on new parts from someone who maybe had a project in mind then sold it.

Good luck and send us pix of the before/during/after.

Crank · 10-21-2006, 10:31 AM

Hey. Another member from KY, welcome! Well, My '86 GMC could use a new clip, so I'm just going to drive to Summit Racing up in Ohio one day and pick up some new fenders for it. They are goodmark and only cost about 80 bucks, plus me picking them up myself will keep them from being all dinged up when I get them. Also they sell doors for 120 per. That is CHEAP for goodmark stuff. Well welcome and get some pictures up of the beast.
Brandon

86swb · 10-22-2006, 11:51 PM

An '86 Shorty for only $800.00? Great buy. Looking forward to the pictures.

Hoods69BadBowTie · 10-23-2006, 12:54 AM

Damn, I gotta say u stole that truck. But awesome find. Can't wait to see some pictures. Welcome to the best board around from MT.
-LaTeR

**Ron 586** · 10-23-2006, 01:16 AM

Welcome to the board from West Tennessee. Sounds like you got a deal on your ride. Get some pictures up so we can see it.

84 400 · 10-23-2006, 01:48 AM

wow great buy. And nice to see another sb 400 going in one of these trucks!!!! can't wait to see pics

Curly86 · 10-27-2006, 05:05 AM

The truck is in the shop as I sit here and type getting the 400 put in it. When I get it back i will post some pics.Will keep posting on it just bught an aluminum sliding back glass for $30 and installed it myself.:

krue · 10-27-2006, 05:21 AM

Welcome to the board from South Mississippi!

86swb · 10-30-2006, 09:34 PM

Still need pictures.

1985K10 · 10-31-2006, 10:52 PM

If nice, rust free GM fenders are available at a reasonable price, go with the GM stuff. If not, I just bought a couple Veng re-pops for my 87....$100ea, and they fit and look pretty good on the first try without adjusting...the inner fenders fit well too.

84 400 · 10-31-2006, 10:56 PM

teah if you can get gm go gm used or new if not then try some of the board venders like capass for the parts

Gary · 11-01-2006, 10:27 PM

Quote:

Originally Posted by 84 400

wow great buy. And nice to see another sb 400 going in one of these trucks!!!! can't wait to see pics

http://faith.dixiesys.com/85-Silverado

There's some more 400 (406) loving for you to keep you happy until the thread starter posts some pics.

kevinr1970 · 11-02-2006, 03:04 AM

Quote:

Originally Posted by Dixiesys

http://faith.dixiesys.com/85-Silverado

There's some more 400 (406) loving for you to keep you happy until the thread starter posts some pics.

You guys are slippin' - pictures posted here.

10-21-2006, 04:07 AM	#1
Curly86 You want it there when??? Join Date: Oct 2006 Location: Lewisburg Ky Posts: 393	86 Silverado I just found a jem of a deal. Found a 86 Silverado SWB with tilt wheel power windows and door locks and a 350 engine in nice condition bought it for $800. It needs both front fenders,which would be better aftermarket fender or junkyard? My ace mechanic is going to put a new rebuilt 400 smallblock in it for me next week I got from my Father in Law. Will post pics when I get a chance

10-21-2006, 09:20 AM	#2
eagle23 Active Member Join Date: Feb 2004 Location: Atlanta GA Posts: 174	Re: 86 Silverado Welcome to the board!! You'll find lots of nice folks here and even more opinions than you'll know what to do with I'd go to the salvage yard for body parts. In general, you can't beat GM originals. Be sure to check for rust, etc...the obvious. Sometimes ebay has some deals on new parts from someone who maybe had a project in mind then sold it. Good luck and send us pix of the before/during/after.

10-21-2006, 10:31 AM	#3
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,965	Re: 86 Silverado Hey. Another member from KY, welcome! Well, My '86 GMC could use a new clip, so I'm just going to drive to Summit Racing up in Ohio one day and pick up some new fenders for it. They are goodmark and only cost about 80 bucks, plus me picking them up myself will keep them from being all dinged up when I get them. Also they sell doors for 120 per. That is CHEAP for goodmark stuff. Well welcome and get some pictures up of the beast. Brandon

10-22-2006, 11:51 PM	#4
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: 86 Silverado An '86 Shorty for only $800.00? Great buy. Looking forward to the pictures. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

10-23-2006, 12:54 AM	#5
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: 86 Silverado Damn, I gotta say u stole that truck. But awesome find. Can't wait to see some pictures. Welcome to the best board around from MT. -LaTeR __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

10-23-2006, 01:16 AM	#6
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: 86 Silverado Welcome to the board from West Tennessee. Sounds like you got a deal on your ride. Get some pictures up so we can see it. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

10-23-2006, 01:48 AM	#7
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: 86 Silverado wow great buy. And nice to see another sb 400 going in one of these trucks!!!! can't wait to see pics __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

10-27-2006, 05:05 AM	#8
Curly86 You want it there when??? Join Date: Oct 2006 Location: Lewisburg Ky Posts: 393	Re: 86 Silverado The truck is in the shop as I sit here and type getting the 400 put in it. When I get it back i will post some pics.Will keep posting on it just bught an aluminum sliding back glass for $30 and installed it myself.:

10-27-2006, 05:21 AM	#9
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: 86 Silverado Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

10-30-2006, 09:34 PM	#10
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: 86 Silverado Still need pictures. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

10-31-2006, 10:52 PM	#11
1985K10 Registered User Join Date: Oct 2003 Location: CT Posts: 315	Re: 86 Silverado If nice, rust free GM fenders are available at a reasonable price, go with the GM stuff. If not, I just bought a couple Veng re-pops for my 87....$100ea, and they fit and look pretty good on the first try without adjusting...the inner fenders fit well too. __________________ Anthony 07 Tahoe LT 70 Chevelle 450HP 383-TH400 77 GMC Royal Sierra~Resto in progress~

10-31-2006, 10:56 PM	#12
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: 86 Silverado teah if you can get gm go gm used or new if not then try some of the board venders like capass for the parts __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.