The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-24-2006, 12:29 PM   #1
cptstickfigure
Registered User
 
Join Date: Nov 2005
Location: Urbana, IL
Posts: 25
Haven't posted in a while

Between working on my project car and moving to the new house, I haven't posted much lately, mostly because there's nothing much to report. As rough as it looks, my '64 kept right on running.

Now that the project is back on the road, I'm starting to look at the truck with a more critical eye. The cab is pretty well shot (rusted through in all the usual places), the heat is iffy, the door handles and window regulators are sloppy, I'm still running drum brakes, and the wiring is downright scary.

I decided to make a scouting run to the local junkyards last weekend in the hopes that it would help me decide what to do with the cab. (Try to patch the bad spots? Replace the whole cab?) Well, my scouting run ended up taking the whole morning.

I ended up at a little yard I've never been to. The lady at the desk said they only had a couple of pre-1980 trucks, and nothing older than 1975, but I figured I'd take a look anyway. Glad I did.

I've never gotten around to lengthening my T5 shifter, mostly because I don't have a replacement if I screw it up. I figured if nothing else, the new S-10 shifter I picked up would make the trip worthwhile.

A little farther back I found a 250 in a clapped out '70s pickup. It turned over so well I had to pull the valve cover to make sure I wasn't just spinning the pulley.

Finally, waaaaaay back in the back, second from the last truck on the lot was a 65-66 C60. Score! It was rusted through in all the same areas mine is, but I figured I'd grab some of the plugs and whatnot, make a list of big parts to come back for, and call it good.



On closer inspection, I saw that this truck had not been touched in a very long time. It had big, thick, classic haunted house spider webs running between the doors and dash, and there was evidence of generations of mice all over the seats. Great.

As an aside, I always seem to need parts out of the really nasty cars. Piles of wet trash, evil mouse piss smell, spiders, bad vibes, the works. I actually bailed pulling some parts out of a '40s IH earlier this year because it gave me the creeps so bad.

Anyway, I opened the door expecting the worst. I was surprised to find that the door actuators worked very well. And the cab didn't smell bad. Kind of nice, actually. It just smelled like barn--dirt, old grain, and maybe a faint whiff of mouse somewhere in the background.



I started investigating the spiderwebs, which were full of big, weird bugs. Apart from a half-dead horsefly, I never saw any hint that they were still being used. Fine with me. The last thing I wanted was a big ol' spider crawling up my sleeve while I was poking around under the dash.

Right, on with the scavenging. Damn! This thing had a COOL old aftermarket turn signal! Yoink!



The wiring harness was in pretty good shape, so I just pulled as much of it as I could. What the heck, right? I was going to leave the ignition switch and key, but in the end I decided I liked the keychain too much.



By this time, I was really getting attached to the truck. I checked the glove box, hoping to find some more information on the previous owners (or maybe some cool swag), but all I found was a big ol' mouse nest.

Sadly, all good things must come to an end. I had enough parts to cover my projects and a long list of stuff to come back for (including some SW gauges on a nearby flatbed), but I wasn't sure what this yard's pricing was like.

As I spread my haul out on the front desk, the lady at the counter looked shocked and asked me where I'd found them. Apparently, they have no record of this truck being in the yard.

All told, I spent $20, which was much cheaper than I expected. The yard here in town wants $10 for a proportioning valve. If I'd known how far my budget would stretch, I'd have grabbed a few more parts. Guess I have something to look forward to after payday!
cptstickfigure is offline   Reply With Quote
Old 10-24-2006, 12:46 PM   #2
krue
Designated A-hole!
 
krue's Avatar
 
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
Re: Haven't posted in a while

Sounds like a good place to hunt around in.
__________________
"If it ain't broke, fix it 'til it is!"
Being stupid ain't illegal.

We're Still Debt Free Except for the House!!!
www.daveramsey.com

70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e
93 S-10 "Poppaw's Truck"
krue is offline   Reply With Quote
Old 10-24-2006, 04:57 PM   #3
62 short step
Senior Member
 
62 short step's Avatar
 
Join Date: Aug 2005
Location: Greenwell Springs, Louisiana
Posts: 2,882
Re: Haven't posted in a while

There is nothing like hunting in the yards! Sounds like a good time!
__________________
www.louisianaclassictruckclub.com


1965 c-10
86 chevy c/k 20

Last edited by 62 short step; 10-24-2006 at 04:58 PM.
62 short step is offline   Reply With Quote
Old 10-24-2006, 08:33 PM   #4
Hilandr451
Registered User
 
Hilandr451's Avatar
 
Join Date: Oct 2005
Location: Houston Texas
Posts: 316
Re: Haven't posted in a while

Junk Yard "trollin" is my favorite pass time, aside from working on my truck that is!
__________________
Greg Smith a.k.a. "The Highlander"
1966 C20 Custom Camper, 2017 Chevy Silverado 1500
Highlander's Project Pics
Highlander's web site: www.6066ChevyTrucks.com
Hilandr451 is offline   Reply With Quote
Old 10-25-2006, 09:41 AM   #5
Chevy Fleetside
Registered User
 
Chevy Fleetside's Avatar
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,782
Re: Haven't posted in a while

yeah.. I go to the yards even if I don't need anything... I think will be going again real soon.. Maybe even today..
Chevy Fleetside is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:55 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com