lwb solid 72 gmc for parts f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 11-07-2006, 04:33 PM

i will be bringing this home later tonite or tomarrow. it has alot of good soild parts on it. i have some looking at these parts .the wood floor bed ,non a/c cab,and brake booster. it has a good hood with about a 7 or 8 in scoop on it that will be $250.00 . it has 2 good ft. fenders they will fit the 67/68 chevy also $250.00 for the pair. rad. suport is useable has some rust under battery $50.00 . i will list more things as it comes apart. also have these parts that i will list later.
v-8 towers
auto. trans. crossmember
2- 400 trans.
1- 350 trans.
extra pair of good doors not perfect.
ft.and rear chrome bumpers no shipping on these or other big parts.
b&m auto floor shifter $100.00 plus ride.

billsbowtie · 11-07-2006, 04:34 PM

billsbowtie · 11-07-2006, 04:34 PM

billsbowtie · 11-07-2006, 04:34 PM

billsbowtie · 11-07-2006, 04:35 PM

billsbowtie · 11-07-2006, 04:35 PM

billsbowtie · 11-07-2006, 04:35 PM

billsbowtie · 11-07-2006, 04:36 PM

billsbowtie · 11-07-2006, 04:36 PM

under cab

billsbowtie · 11-07-2006, 04:36 PM

billsbowtie · 11-07-2006, 04:37 PM

billsbowtie · 11-07-2006, 04:37 PM

billsbowtie · 11-07-2006, 04:39 PM

billsbowtie · 11-07-2006, 04:39 PM

billsbowtie · 11-07-2006, 04:41 PM

if interested in any of these parts respond here frist then pm me if you want. that way i can keep track of it better.

meathead95 · 11-07-2006, 05:08 PM

how much for the bed?

aitch · 11-07-2006, 07:49 PM

I'm in the market for a grill for an experiment.

project1971 · 11-07-2006, 09:09 PM

is the hood fiberglass or steel? pic of under the hood? thanks

billsbowtie · 11-07-2006, 09:43 PM

keith bed is in good shape other than wood needs replaced. and the only bondo i saw in it was inner wheel arch on pass. side . i am asking $800.00 for the bed with tailgate . $750.00 without tailgate . tailgate is good and straight it does have a rust whole inside at bottom 2inch square. bed is about a 9 out of 10 . and tailgate is a good 8 it says gmc on it.
aitch i think the grille will cost to much to ship.
ptoject1971 steel hood with fiberglass scoop.
but like i stated earlier i have someone looking at the bed,cab,and booster.

bad69bowtie · 11-07-2006, 10:30 PM

Bill, how much for a complete auto. trans changeover including column, crossmember, and all linkage? If not complete, tell me what you have and how much money. Thanks.....Robert

billsbowtie · 11-07-2006, 10:58 PM

69badbowtie do you want the floor shifter or colum shifer?
colum with colum shifter trans. crossmember, and bb linkage it will work with the sb also. $125.00 for those parts.
do you need a trans. to. i have 2 400's and 1 350.

billsbowtie · 11-07-2006, 11:03 PM

i didn't get it home tonite because it raining cats and dogs here.
i will try again tomarrow.
i am supose to get some new gm trim still in the pack with this truck.

msgross · 11-07-2006, 11:19 PM

how about that booster with all brackets and rods...no MC needed 17042 for shipping....

billsbowtie · 11-07-2006, 11:22 PM

msgross sending you a pm.

1971custom · 11-08-2006, 12:31 AM

how about the grill trim fender moldings there on each side or the grill and are called the eye browles i think and how about the front bumper

11-07-2006, 04:33 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	lwb solid 72 gmc for parts f/s i will be bringing this home later tonite or tomarrow. it has alot of good soild parts on it. i have some looking at these parts .the wood floor bed ,non a/c cab,and brake booster. it has a good hood with about a 7 or 8 in scoop on it that will be $250.00 . it has 2 good ft. fenders they will fit the 67/68 chevy also $250.00 for the pair. rad. suport is useable has some rust under battery $50.00 . i will list more things as it comes apart. also have these parts that i will list later. v-8 towers auto. trans. crossmember 2- 400 trans. 1- 350 trans. extra pair of good doors not perfect. ft.and rear chrome bumpers no shipping on these or other big parts. b&m auto floor shifter $100.00 plus ride.

11-07-2006, 04:34 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s

11-07-2006, 04:34 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s

11-07-2006, 04:34 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s

11-07-2006, 04:35 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s

11-07-2006, 04:36 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s

11-07-2006, 04:36 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s under cab

11-07-2006, 04:37 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s

11-07-2006, 04:39 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s

11-07-2006, 04:41 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s if interested in any of these parts respond here frist then pm me if you want. that way i can keep track of it better.

11-07-2006, 05:08 PM	#16
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: lwb soild 72 gmc for parts f/s how much for the bed? __________________ 72 2wd blazer 72 swb 4x4

11-07-2006, 07:49 PM	#17
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	Re: lwb soild 72 gmc for parts f/s I'm in the market for a grill for an experiment. __________________ 69 GMC 3/4 ton LWB 383 TH400 Dana 60 '84 300ZX '79 Nova (for sale)

11-07-2006, 09:09 PM	#18
project1971 Registered User Join Date: Apr 2003 Location: Oklahoma City Posts: 605	Re: lwb soild 72 gmc for parts f/s is the hood fiberglass or steel? pic of under the hood? thanks __________________ 2008 Ford FX2 Screw 1971 C10 project in shop now! 2004 Pontiac Grandam (wifes) 2000 Cavalier z24 (gas saver)

11-07-2006, 09:43 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s keith bed is in good shape other than wood needs replaced. and the only bondo i saw in it was inner wheel arch on pass. side . i am asking $800.00 for the bed with tailgate . $750.00 without tailgate . tailgate is good and straight it does have a rust whole inside at bottom 2inch square. bed is about a 9 out of 10 . and tailgate is a good 8 it says gmc on it. aitch i think the grille will cost to much to ship. ptoject1971 steel hood with fiberglass scoop. but like i stated earlier i have someone looking at the bed,cab,and booster. Last edited by billsbowtie; 11-07-2006 at 09:45 PM.

11-07-2006, 10:30 PM	#20
bad69bowtie Active Member Join Date: Apr 2004 Location: Kingsport, TN Posts: 134	Re: lwb soild 72 gmc for parts f/s Bill, how much for a complete auto. trans changeover including column, crossmember, and all linkage? If not complete, tell me what you have and how much money. Thanks.....Robert __________________ 1969 C-10 short fleet 2wd. 400ci. w/350 Turbo. '68 front clip and factory wood bed floor. 3"/5" coil drop. 1971 K-10 short fleet 4wd. Partial project truck. 1972 K-10 long fleet 4wd. Complete project truck.



Register or Log In To remove these advertisements.

11-07-2006, 10:58 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s 69badbowtie do you want the floor shifter or colum shifer? colum with colum shifter trans. crossmember, and bb linkage it will work with the sb also. $125.00 for those parts. do you need a trans. to. i have 2 400's and 1 350.

11-07-2006, 11:03 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s i didn't get it home tonite because it raining cats and dogs here. i will try again tomarrow. i am supose to get some new gm trim still in the pack with this truck.

11-07-2006, 11:19 PM	#23
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: lwb soild 72 gmc for parts f/s how about that booster with all brackets and rods...no MC needed 17042 for shipping....

11-07-2006, 11:22 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: lwb soild 72 gmc for parts f/s msgross sending you a pm.

11-08-2006, 12:31 AM	#25
1971custom Registered User Join Date: Apr 2005 Location: south west nebraska Posts: 244	Re: lwb solid 72 gmc for parts f/s how about the grill trim fender moldings there on each side or the grill and are called the eye browles i think and how about the front bumper __________________

Register or Log In To remove these advertisements.