value of nos blazer bed sides? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c-1072 · 11-17-2006, 04:26 PM

Let me start off by saying i do not have any nor would i sell them if i did . With that said i was wondering what is a fair price to pay for a pair if i found some 1k 2k give me your opion . Thanks
I hope this is in the right place .ps if anyone has a pair pm me i am lookin .

krue · 11-17-2006, 04:28 PM

This needs to be on the parts board, so that's where I'm moving it.

meathead95 · 11-17-2006, 05:48 PM

i have a pair i paid 2k for now i just need to find a rust free rear floor

72highlander · 11-17-2006, 05:53 PM

know of a guy who saw a pair sell for $2800 at charlotte.

LUV2XCLR8 · 11-17-2006, 06:36 PM

Quote:

Originally Posted by meathead95

i have a pair i paid 2k for

That would be the max, JMHO, nice OE ones go for around $1K a pair

vtblazer · 11-17-2006, 07:08 PM

I had a totally rust free factory tub (only sides and floor) sold @ 3K until the buyer had family troubles and had to back out.

**jamie72** · 11-17-2006, 07:16 PM

there was a pair in carlisle pa swapmeet went for 900.00 i just missed them!!

LUV2XCLR8 · 11-17-2006, 07:25 PM

Quote:

Originally Posted by jamie72

there was a pair in carlisle pa swapmeet went for 900.00 i just missed them!!

NOS !!! Wow, that was deal

c-1072 · 11-17-2006, 07:32 PM

Quote:

Originally Posted by jamie72

there was a pair in carlisle pa swapmeet went for 900.00 i just missed them!!

SOB why cant i have esp

LUV2XCLR8 · 11-17-2006, 07:52 PM

Quote:

Originally Posted by c-1072

SOB why cant i have esp

70rs/ss · 11-17-2006, 07:55 PM

I have a rust free 4X4 and if I sold it $5k would be alot, but if the quarters are worth a $g a piece maybe I should ask for more!! All joking aside I know meathead is putting them on a nice 2wd, other than that, I'd just buy a rust free tub and go from there. There are a lot of Blazers out there, and then you could use the tub as needed. $2k if you have a rare enough Blazer to fix, otherwise buy a nicer truck/blazer to start with!!

RED72blazer · 11-17-2006, 08:01 PM

there is a pair on ebay right now starting bid of 1500

Rokcrln · 11-17-2006, 09:09 PM

Now I have a factory 2wd 70 Blazer that will be getting new side but I am goint to go the route of buying new SWB sides and cut the front at the B post. Once done you will not be able to tell and it will be brand new at alot less cost. The way that I look at it is I have installed anlot of NOS parts and very few of them did not need work just like the after market stuff. Heck I feel some of the NOS stuff was not used back then because of how bad it did fit. Just my thoughts.

Kevin
LFD Inc.

WILLNIK · 11-18-2006, 10:30 AM

Hi Todd, sorry I don't have any either, but I lost your #. Call me if you are still interested in the 4X4 parts truck.

Terry

315-521-9193

LUV2XCLR8 · 11-18-2006, 11:30 AM

Quote:

Originally Posted by RED72blazer

there is a pair on ebay right now starting bid of 1500

I know, we have been chatting, but it doesn't look possible

meathead95 · 11-18-2006, 07:07 PM

[QUOTE=Rokcrln;1890028] Heck I feel some of the NOS stuff was not used back then because of how bad it did fit. Just my thoughts. [QUOTE]

Huck · 11-19-2006, 08:18 PM

NOS doesn't always mean perfect or excellent. The last Blazer I bought had a NOS pass bedside installed on it with both the B & C pillars installed crooked. This in turn allowed the inner quarter to be out of alignment with the outer. There must be like 150 spot welds holding these 4 pieces together. I gave up!
I saw those "NOS in the gm box" bedsides at Carlisle with an asking price of $600. each. They had enough surface rust on them to have eaten into the metal causing pits which were too deep to grind out. Still tempting. Probably harder to find a NOS or perfect floor!!

11-17-2006, 04:26 PM	#1
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	value of nos blazer bed sides? Let me start off by saying i do not have any nor would i sell them if i did . With that said i was wondering what is a fair price to pay for a pair if i found some 1k 2k give me your opion . Thanks I hope this is in the right place .ps if anyone has a pair pm me i am lookin .

11-17-2006, 04:28 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: value of nos blazer bed sides? This needs to be on the parts board, so that's where I'm moving it. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-17-2006, 05:48 PM	#3
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: value of nos blazer bed sides? i have a pair i paid 2k for now i just need to find a rust free rear floor __________________ 72 2wd blazer 72 swb 4x4

11-17-2006, 05:53 PM	#4
72highlander Sophomore Member Join Date: Jul 2006 Location: brownwood, tx Posts: 927	Re: value of nos blazer bed sides? know of a guy who saw a pair sell for $2800 at charlotte. __________________ 1972 Chevrolet Highlander SWB 1972 Custom Deluxe 3/4 2WD 60k miles these trucks don't need vacuum gauges cause they don't suck! two wrongs don't make a right, but three rights do make a left all i want is a little more than i'll ever get it's better to be judged by 12 than to be carried by 6

11-17-2006, 07:08 PM	#6
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,538	Re: value of nos blazer bed sides? I had a totally rust free factory tub (only sides and floor) sold @ 3K until the buyer had family troubles and had to back out.

11-17-2006, 07:16 PM	#7
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	Re: value of nos blazer bed sides? there was a pair in carlisle pa swapmeet went for 900.00 i just missed them!! __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

11-17-2006, 07:55 PM	#11
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: value of nos blazer bed sides? I have a rust free 4X4 and if I sold it $5k would be alot, but if the quarters are worth a $g a piece maybe I should ask for more!! All joking aside I know meathead is putting them on a nice 2wd, other than that, I'd just buy a rust free tub and go from there. There are a lot of Blazers out there, and then you could use the tub as needed. $2k if you have a rare enough Blazer to fix, otherwise buy a nicer truck/blazer to start with!!

11-17-2006, 08:01 PM	#12
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	Re: value of nos blazer bed sides? there is a pair on ebay right now starting bid of 1500 __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

11-17-2006, 09:09 PM	#13
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: value of nos blazer bed sides? Now I have a factory 2wd 70 Blazer that will be getting new side but I am goint to go the route of buying new SWB sides and cut the front at the B post. Once done you will not be able to tell and it will be brand new at alot less cost. The way that I look at it is I have installed anlot of NOS parts and very few of them did not need work just like the after market stuff. Heck I feel some of the NOS stuff was not used back then because of how bad it did fit. Just my thoughts. Kevin LFD Inc.

11-18-2006, 10:30 AM	#14
WILLNIK Senior Member Join Date: Jul 2000 Location: Newark, NY Posts: 626	Re: value of nos blazer bed sides? Hi Todd, sorry I don't have any either, but I lost your #. Call me if you are still interested in the 4X4 parts truck. Terry 315-521-9193 __________________ 50 miles west of Syracuse, NY '94 Silverado swb '70 Chevelle '65 Corvette roadster '11 Tahoe (wifes ride)

11-18-2006, 07:07 PM	#16
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: value of nos blazer bed sides? [QUOTE=Rokcrln;1890028] Heck I feel some of the NOS stuff was not used back then because of how bad it did fit. Just my thoughts. [QUOTE] __________________ 72 2wd blazer 72 swb 4x4

11-19-2006, 08:18 PM	#17
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: value of nos blazer bed sides? NOS doesn't always mean perfect or excellent. The last Blazer I bought had a NOS pass bedside installed on it with both the B & C pillars installed crooked. This in turn allowed the inner quarter to be out of alignment with the outer. There must be like 150 spot welds holding these 4 pieces together. I gave up! I saw those "NOS in the gm box" bedsides at Carlisle with an asking price of $600. each. They had enough surface rust on them to have eaten into the metal causing pits which were too deep to grind out. Still tempting. Probably harder to find a NOS or perfect floor!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.