How I roll, kinda - The 1947 - Present Chevrolet & GMC Truck Message Board Network

patternmakerbob · 11-17-2006, 11:57 PM

HI guys and a few girls (where were you when I was single?). I have visited this site many times in the past but didn't become a member because I didn't have a truck. I have had (4) 67-72 chevy trucks in the past and now I do again.

First off NEVER buy anything off ebay without going through ebay. Most of you understand what I am saying. I found my truck on ebay and asked if there was a "buy it now price" I was told there was and I was excited. He called me and told me he couldn't change it the auction to "buy it now" because he had less than 10 feed backs. I found out later that this was bullsh#t. I made the deal anyways.

71 Chevy hugger orange, white top, longbed. 454 3 speed on the floor . Power steering.

The seller told me he would drive it from Gentry AR to Joplin, MO and it could make it the rest of the way home to STL with no problem.

I met him at the flying J in Joplin and had the cash. I noticed he trailered it but was just not thinking after 6 hours of driving with the kids.

They were hungry and the wife just wanted the deal over so we could eat.

We started it and took it for a test drive. I put on the emergency brake and the seller had to get under it with a hammer to get the wheel loose. He told me "we don't use that much". OK no big deal, just the E brake sticks right?

He had brought his wife and she was very nice. They seemed like honest people and boasted how she drove the truck frequently, rrrright. The collectors on the headers were leaking and he told me about "open header night" when they close off main st. and the cops let you cruise with open headers and do burnouts. "As long as you don't get too crazy" UHHH OK where DO they draw the line for safety in Arkansas? I soon found out.

I drove it to the hotel Saturday night and knew there was going to be some work ahead of me.

None of the guages worked! even though the seller told me the fuel and temp did work. I got under them to see nothing hooked up. OH boy. I went to Orieley's in Joplin at 9 am. and was going to put a temp guage in so I could monitor it on the way home. I also fixed the shock on the left rear that was hanging and replaced the top radiator hose, neck and thermostat.

I noticed the tires were chunked out on the rear and dry rotted on the front, no spare. I took it to Firestone in Joplin for a set of new tires for the drive home. When they removed the wheels all hell broke loose. The master cylinder was not holding fluid in the rear reservoir, so it was replaced. When they tried to bleed the brakes the rear drive wheel had a brake line that was cut and crimped (guess for burn out night.?? Way to go, thanks for telling me, I could have rear ended my own family on the way home, dumb*ss) Tried to bleed them again and the wheel cylinders leaked. The drums were taken off and on the passenger side the parts literally fell to the floor (uhh burn out night was fun??)
So I had the back brakes replaced. The kid doing the work, Josh was really good. He noticed the rubber fuel lines were dry rotted and leaking. So they were replaced along with the fuel filter. I also had them change the oil since I was going to drive it 300 miles home. They couldn't complete the work on Sunday night so we had to stay in the hotel again. This meant my kids would miss school on Monday. That's when you are a redneck. Your kids miss school because of an old chevy truck purchase.

Total Cost at Firestone $698 , very fair in my opinion for all that work and new tires! Truck was ready to roll on Monday around noon.

I drove it to Springfield and realized the rear end was going to have to be changed. It is way too low, 4/11, 4/10??. The truck would run ok but back fire occasionally.

I stopped in Orieleys in springfield, mo and bought a timing light. To my surprise, not, it was way off. I timed it and it ran much better.

We got on the highway and came up on an 18 wheeler. I had to hit the gas a little hard to pass and it started backfiring really bad. So bad in fact that it blew the hoses off the quadrajunk. I put the hoses back on but it ran horrible.

Quadrajunk 0, backfire 1.

We stopped in St. Roberts and found an autozone. I bought an edelbrock 600 with electric choke and put it on in the parking lot, 48 minutes flat thank you.

We ate at taco bell and got back on the highway around 9 pm. The truck backfired very bad and died on the highway. I made it maybe 10 miles to dolittle, Mo and called for a tow. I was done, nothing else was open. Guess the wires were crossfiring.??

The tow cost me $250 and we got home at 1 am Tuesday.
All toll it cost me over $2000 to get it home, but at least I have some new parts.

Wife is freaking p*ssed. It still isn't running but I have some work to get finished before I mess with it again.

First will be a compression test and if that is good then complete tune up and new ignition.

Going to put in Oriely guages and make a nice cluster out of Cherry. It will be awesome and at a fraction of the cost.
HOpe the pictures are attached. If not let me know how I can paste them and I will.

Wow I typed alot.
Bob

**Canadian694x4** · 11-18-2006, 02:07 PM

Welcome To The Boards From The Great White North! That's Quite The Ordeal Ya Went Thru. Hope The Wife Forgives Ya

1LoC10 · 11-18-2006, 02:13 PM

wow, sounds like a hell of a trip... trucks looks clean though, I would keep it and work it all out

krue · 11-18-2006, 03:11 PM

What's wrong with living in a trailer.

patternmakerbob · 11-18-2006, 03:32 PM

Nothing, but can't afford the house and the truck restored.

This was a suggestion to my wife during the "what the f*ck were you thinking" *****n I was recieving after we got home. I was already in trouble so might as well have some fun.

jsbgump · 11-18-2006, 05:50 PM

Welcome to the board

red4wd · 11-18-2006, 07:38 PM

Nice looking truck....I would get it where it will start and drive to the parts store, that should quiet some of the "wtf where you thinking" comments.

Dadsredwagon · 11-18-2006, 10:14 PM

same thing with my wife the heck ,now the home owners assoc is telling me to get rid of my junk .... but nothing like getiing in her and driving around the neighbor hood, brings back sooo many good memories, worth all the crap ya go through

shaneschevys · 11-18-2006, 10:52 PM

Welcome from FT Worth TX.

mtndewmaniac66 · 11-18-2006, 11:33 PM

WOW! What an ordeal! I'm sure we all would have done the same thing though. My level of excitement sometimes overshadows my common sense at times. Just hope that your project makes up for the inconvenience that your family endured.

CAL 58 GMC · 11-19-2006, 01:10 AM

Welcome to the board!

86swb · 11-19-2006, 10:28 PM

Wow, that was terrible. Thank God for credit cards (I guess) At least the wife did now try to kill you. (did she?) Yep, I think you learned your lesson. Anyway, welcome to the truck board from Western Kentucky.

71SWBChevy · 11-20-2006, 04:47 PM

to the board from KY!

*bskylerj* · 11-20-2006, 06:10 PM

Welcome from Washington State. I would take the trailer option as I am sure you are already sleeping with one eye open after pissing her off.

I say we all go find this guy

Hoods69BadBowTie · 11-20-2006, 08:24 PM

Yeah I never have bought a truck with out seeing it and driving it first. Welcome to the board from Montana. I would keep it and fix it up. That suxs about your ebay dealing though.

**FleetsidePaul** · 11-20-2006, 11:41 PM

You got a really cool truck....keep it.

you're being too hard on yourself. every used vehicle is a gamble.

And at least from my experience...women never understand that fact.

**Roland** · 11-21-2006, 04:04 PM

Very interesting! But just think about how 10 years down the road after everything's fixed up perfectly and the wife and kiddies are helping wax "the truck", and someone starts telling war stories about things they've done as a family. Your tale will take the prize! All the "used to" stuff we enjoy tellin' was no fun at all while it was happening.

Welcome to the boards.

FRENCHBLUE72 · 11-23-2006, 01:49 PM

Welcome to the board from southern oregon..

LUV2XCLR8 · 11-26-2006, 07:40 AM

Voted my $0.02

**BOSS** · 11-28-2006, 11:12 AM

Welcome to the board from Missouri and thanx for joining up

She will eventually get over it when it is done,then you both can laugh about its first trip home.....lol

desertrat · 11-28-2006, 12:52 PM

Sorry to here about youre bad experiance, I wish I could say "now you know and it wont happen again" but I have had my share of bad sellers and for some dumb reason I seem to fall for another trap (like my last "IMCA" deal). I wish I could give you addvise but I can never seem make that decision either. Good luck with youre truck and maybe buy youre wife some flowers

.

Rollie396 · 11-28-2006, 04:25 PM

I'd like to read the negative feedback that fella is gonna get

.
It really amazes me that someone could be okay with putting your life and others at risk just to sell a truck.Sad really...
Welcome to the board and glad that you and your family made it home save!

Longhorn Man · 11-28-2006, 05:47 PM

I say y9u are in it for too much money already, and you'd never get your money out of it without being dishonest... which would make you...the evil seller.
Is there a way to park it for 6 months and not spend any money on it? I'm sure you can find a million things you could do that are labor only items... or nickle and dime items at least.

**Ron 586** · 11-28-2006, 11:22 PM

Welcome from West Tennessee.

View Poll Results: should I keep it?
Make seller buy it back?	1	3.45%
Keep it and invest another $1500?	21	72.41%
Sell it?	1	3.45%
Sell the house, take the equity and frame off restore. Move into a trailer.	6	20.69%
Voters: 29. You may not vote on this poll

11-17-2006, 11:57 PM	#1
patternmakerbob Junior Member Join Date: Nov 2006 Location: Crystal City, MO Posts: 47	How I roll, kinda HI guys and a few girls (where were you when I was single?). I have visited this site many times in the past but didn't become a member because I didn't have a truck. I have had (4) 67-72 chevy trucks in the past and now I do again. First off NEVER buy anything off ebay without going through ebay. Most of you understand what I am saying. I found my truck on ebay and asked if there was a "buy it now price" I was told there was and I was excited. He called me and told me he couldn't change it the auction to "buy it now" because he had less than 10 feed backs. I found out later that this was bullsh#t. I made the deal anyways. 71 Chevy hugger orange, white top, longbed. 454 3 speed on the floor . Power steering. The seller told me he would drive it from Gentry AR to Joplin, MO and it could make it the rest of the way home to STL with no problem. I met him at the flying J in Joplin and had the cash. I noticed he trailered it but was just not thinking after 6 hours of driving with the kids. They were hungry and the wife just wanted the deal over so we could eat. We started it and took it for a test drive. I put on the emergency brake and the seller had to get under it with a hammer to get the wheel loose. He told me "we don't use that much". OK no big deal, just the E brake sticks right? He had brought his wife and she was very nice. They seemed like honest people and boasted how she drove the truck frequently, rrrright. The collectors on the headers were leaking and he told me about "open header night" when they close off main st. and the cops let you cruise with open headers and do burnouts. "As long as you don't get too crazy" UHHH OK where DO they draw the line for safety in Arkansas? I soon found out. I drove it to the hotel Saturday night and knew there was going to be some work ahead of me. None of the guages worked! even though the seller told me the fuel and temp did work. I got under them to see nothing hooked up. OH boy. I went to Orieley's in Joplin at 9 am. and was going to put a temp guage in so I could monitor it on the way home. I also fixed the shock on the left rear that was hanging and replaced the top radiator hose, neck and thermostat. I noticed the tires were chunked out on the rear and dry rotted on the front, no spare. I took it to Firestone in Joplin for a set of new tires for the drive home. When they removed the wheels all hell broke loose. The master cylinder was not holding fluid in the rear reservoir, so it was replaced. When they tried to bleed the brakes the rear drive wheel had a brake line that was cut and crimped (guess for burn out night.?? Way to go, thanks for telling me, I could have rear ended my own family on the way home, dumbss) Tried to bleed them again and the wheel cylinders leaked. The drums were taken off and on the passenger side the parts literally fell to the floor (uhh burn out night was fun??) So I had the back brakes replaced. The kid doing the work, Josh was really good. He noticed the rubber fuel lines were dry rotted and leaking. So they were replaced along with the fuel filter. I also had them change the oil since I was going to drive it 300 miles home. They couldn't complete the work on Sunday night so we had to stay in the hotel again. This meant my kids would miss school on Monday. That's when you are a redneck. Your kids miss school because of an old chevy truck purchase. Total Cost at Firestone $698 , very fair in my opinion for all that work and new tires! Truck was ready to roll on Monday around noon. I drove it to Springfield and realized the rear end was going to have to be changed. It is way too low, 4/11, 4/10??. The truck would run ok but back fire occasionally. I stopped in Orieleys in springfield, mo and bought a timing light. To my surprise, not, it was way off. I timed it and it ran much better. We got on the highway and came up on an 18 wheeler. I had to hit the gas a little hard to pass and it started backfiring really bad. So bad in fact that it blew the hoses off the quadrajunk. I put the hoses back on but it ran horrible. Quadrajunk 0, backfire 1. We stopped in St. Roberts and found an autozone. I bought an edelbrock 600 with electric choke and put it on in the parking lot, 48 minutes flat thank you. We ate at taco bell and got back on the highway around 9 pm. The truck backfired very bad and died on the highway. I made it maybe 10 miles to dolittle, Mo and called for a tow. I was done, nothing else was open. Guess the wires were crossfiring.?? The tow cost me $250 and we got home at 1 am Tuesday. All toll it cost me over $2000 to get it home, but at least I have some new parts. Wife is freaking pssed. It still isn't running but I have some work to get finished before I mess with it again. First will be a compression test and if that is good then complete tune up and new ignition. Going to put in Oriely guages and make a nice cluster out of Cherry. It will be awesome and at a fraction of the cost. HOpe the pictures are attached. If not let me know how I can paste them and I will. Wow I typed alot. Bob

11-18-2006, 02:07 PM	#2
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: How I roll, kinda Welcome To The Boards From The Great White North! That's Quite The Ordeal Ya Went Thru. Hope The Wife Forgives Ya __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

11-18-2006, 02:13 PM	#3
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: How I roll, kinda wow, sounds like a hell of a trip... trucks looks clean though, I would keep it and work it all out __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

11-18-2006, 03:11 PM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: How I roll, kinda What's wrong with living in a trailer. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-18-2006, 03:32 PM	#5
patternmakerbob Junior Member Join Date: Nov 2006 Location: Crystal City, MO Posts: 47	Re: How I roll, kinda Nothing, but can't afford the house and the truck restored. This was a suggestion to my wife during the "what the fck were you thinking" ****n I was recieving after we got home. I was already in trouble so might as well have some fun.

11-18-2006, 05:50 PM	#6
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: How I roll, kinda Welcome to the board __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

11-18-2006, 07:38 PM	#7
red4wd Registered User Join Date: Nov 2006 Location: Arkansas Posts: 4	Re: How I roll, kinda Nice looking truck....I would get it where it will start and drive to the parts store, that should quiet some of the "wtf where you thinking" comments.

11-18-2006, 10:14 PM	#8
Dadsredwagon Registered User Join Date: Aug 2006 Location: Spring,TX Posts: 342	Re: How I roll, kinda same thing with my wife the heck ,now the home owners assoc is telling me to get rid of my junk .... but nothing like getiing in her and driving around the neighbor hood, brings back sooo many good memories, worth all the crap ya go through

11-18-2006, 10:52 PM	#9
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: How I roll, kinda Welcome from FT Worth TX. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

11-18-2006, 11:33 PM	#10
mtndewmaniac66 Do the Dew! Join Date: May 2005 Location: Vernal, Utah Posts: 191	Re: How I roll, kinda WOW! What an ordeal! I'm sure we all would have done the same thing though. My level of excitement sometimes overshadows my common sense at times. Just hope that your project makes up for the inconvenience that your family endured.

11-19-2006, 01:10 AM	#11
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: How I roll, kinda Welcome to the board! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

11-19-2006, 10:28 PM	#12
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: How I roll, kinda Wow, that was terrible. Thank God for credit cards (I guess) At least the wife did now try to kill you. (did she?) Yep, I think you learned your lesson. Anyway, welcome to the truck board from Western Kentucky. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

11-20-2006, 04:47 PM	#13
71SWBChevy Post Whore Join Date: Aug 2005 Location: Owensboro KY Posts: 11,905	Re: How I roll, kinda to the board from KY! __________________ Drew '71 Chevy 350/TH350 Hugger Orange Currently just a rolling frame, body work soon to follow!!! Check out my Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=212927 Daily Driver: 1997 Chevrolet S-10 with more gears than pistons

11-20-2006, 06:10 PM	#14
bskylerj Account Suspended Join Date: Dec 2005 Location: SPOKANE, WASHINGTON Posts: 1,001	Re: How I roll, kinda Welcome from Washington State. I would take the trailer option as I am sure you are already sleeping with one eye open after pissing her off. I say we all go find this guy



Register or Log In To remove these advertisements.

11-20-2006, 08:24 PM	#15
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: How I roll, kinda Yeah I never have bought a truck with out seeing it and driving it first. Welcome to the board from Montana. I would keep it and fix it up. That suxs about your ebay dealing though. __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

11-20-2006, 11:41 PM	#16
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,418	Re: How I roll, kinda You got a really cool truck....keep it. you're being too hard on yourself. every used vehicle is a gamble. And at least from my experience...women never understand that fact. __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

11-21-2006, 04:04 PM	#17
Roland Junior Member Join Date: Nov 2006 Location: Brandon, MS Posts: 134	Re: How I roll, kinda Very interesting! But just think about how 10 years down the road after everything's fixed up perfectly and the wife and kiddies are helping wax "the truck", and someone starts telling war stories about things they've done as a family. Your tale will take the prize! All the "used to" stuff we enjoy tellin' was no fun at all while it was happening. Welcome to the boards.

11-23-2006, 01:49 PM	#18
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: How I roll, kinda Welcome to the board from southern oregon.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-26-2006, 07:40 AM	#19
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: How I roll, kinda Voted my $0.02 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-28-2006, 11:12 AM	#20
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Re: How I roll, kinda Welcome to the board from Missouri and thanx for joining up She will eventually get over it when it is done,then you both can laugh about its first trip home.....lol __________________ Support our site Norwood Survivor

11-28-2006, 12:52 PM	#21
desertrat Registered User Join Date: Nov 2006 Location: Pahrump, NV Posts: 1,079	Re: How I roll, kinda Sorry to here about youre bad experiance, I wish I could say "now you know and it wont happen again" but I have had my share of bad sellers and for some dumb reason I seem to fall for another trap (like my last "IMCA" deal). I wish I could give you addvise but I can never seem make that decision either. Good luck with youre truck and maybe buy youre wife some flowers .

11-28-2006, 04:25 PM	#22
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Re: How I roll, kinda I'd like to read the negative feedback that fella is gonna get . It really amazes me that someone could be okay with putting your life and others at risk just to sell a truck.Sad really... Welcome to the board and glad that you and your family made it home save! __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

11-28-2006, 05:47 PM	#23
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: How I roll, kinda I say y9u are in it for too much money already, and you'd never get your money out of it without being dishonest... which would make you...the evil seller. Is there a way to park it for 6 months and not spend any money on it? I'm sure you can find a million things you could do that are labor only items... or nickle and dime items at least.

11-28-2006, 11:22 PM	#24
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: How I roll, kinda Welcome from West Tennessee. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

Register or Log In To remove these advertisements.