Help please!! looking for fuel lines for 89' Silverado w/350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*67BABYBLUE* · 11-21-2006, 08:34 PM

Looking to buy fuel lines for my 1989 Chevy 1/2 ton 2 wheel drive short bed pickup with a 350 V-8. The two lines I need are the one that goes from the fuel pump to the fuel filter & the return line from the engine to the fuel tank. Both of these lines have fittings on both ends. I called my local Chevy dealer today and they said these lines are discontinued. I find it hard to believe. Hopefully someone can help me because my lines were so rusty that they both sprung leaks. If there are truly discontinued please someone give me some suggestions on what to do. Thanks 67BABYBLUE

ClassicJimmy · 11-22-2006, 02:16 AM

Actually I ran into this a while back on my 92. The dealer in town had one & said I was lucky for that very reason - discontinued. Start hunting around salvage yards or find someone parting a truck out. Board members here have been known to do that from time to time. Check the board classifides. Sorry to hear abount your bad luck, hope it goes to good soon!

krue · 11-22-2006, 02:20 AM

I'm gonna move this to the parts board for you. I may have what you need, but I don't have a clue how to ship without them getting afu'd.

I have a frame from a truck in that yr range (late 80's early 90's) that the lines are still on. I don't know if they are the same or how to tell what yr the frame I have is (it was given to me).

Aarons72s · 11-22-2006, 07:53 AM

Here is a suggestion if you cant find rplacements. Are yours still all there? If so take them to a shop that does metal lines and they should be able to bend you some new ones. Plus you could get stainless steel ones made and not have to worry about rust. Just a thought.

corn · 11-22-2006, 07:08 PM

Whats so different about them? They arent hi pressure or anything. Couldnt a guy just make them?

John S · 11-22-2006, 11:37 PM

there is a company called finishline that is making new fuel lines for these trucks , have used them and fit pretty well.

neev_nav · 11-23-2006, 06:59 PM

I recently replaced all of my fuel lines while I had the box off of the truck to replace the tank and I went with rubber lines with fittings on the ends where they attach to the TBI, fuel filter and tank. So far so good, and best of all, no bending!

**uncle** · 11-23-2006, 08:48 PM

I have some on a truck. I'll check Saturday if you still need them.

bagged91 · 12-15-2006, 11:46 AM

Are the ones you need the steel hard line type or the braided stainless flexible ones? I might have a set laying around from one of my projects...

Kevin45 · 12-16-2006, 07:02 AM

Quote:

Whats so different about them? They arent hi pressure or anything. Couldnt a guy just make them?

If it's fuel injected it does carry more pressure than the standard fuel pump on the earlier rides. And an '89 is FI.

deoncollins69 · 12-28-2006, 09:01 AM

Hey guys you can get a full stainles kit from http://www.inlinetube.com/
for your year truck. they are 150 front to back great deal considering my 94 lines from the filter back by itself is 100$ for just one. Check em out. You can also get a stainless steel sending unit while your are at it for around 72$

11-21-2006, 08:34 PM	#1
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Help please!! looking for fuel lines for 89' Silverado w/350 Looking to buy fuel lines for my 1989 Chevy 1/2 ton 2 wheel drive short bed pickup with a 350 V-8. The two lines I need are the one that goes from the fuel pump to the fuel filter & the return line from the engine to the fuel tank. Both of these lines have fittings on both ends. I called my local Chevy dealer today and they said these lines are discontinued. I find it hard to believe. Hopefully someone can help me because my lines were so rusty that they both sprung leaks. If there are truly discontinued please someone give me some suggestions on what to do. Thanks 67BABYBLUE

11-22-2006, 02:16 AM	#2
ClassicJimmy FNG to resto/mod world! Join Date: Nov 2005 Location: Spokane, Wa Posts: 196	Re: Help please!! looking for fuel lines for 89' Silverado w/350 Actually I ran into this a while back on my 92. The dealer in town had one & said I was lucky for that very reason - discontinued. Start hunting around salvage yards or find someone parting a truck out. Board members here have been known to do that from time to time. Check the board classifides. Sorry to hear abount your bad luck, hope it goes to good soon! __________________ 71 GMC Jimmy - under construction 75 GMC K25 Sierra Grande - under deconstruction 92 Chevy K2500 ECSB - sold 04 Nissan Titan ECSB Off Road - sold & missed 13 Ford F-150 Ecoboost (work truck) - sold 16 Ford F-150 Ecoboost (work truck)

11-22-2006, 02:20 AM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Help please!! looking for fuel lines for 89' Silverado w/350 I'm gonna move this to the parts board for you. I may have what you need, but I don't have a clue how to ship without them getting afu'd. I have a frame from a truck in that yr range (late 80's early 90's) that the lines are still on. I don't know if they are the same or how to tell what yr the frame I have is (it was given to me). __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

11-22-2006, 07:53 AM	#4
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: Help please!! looking for fuel lines for 89' Silverado w/350 Here is a suggestion if you cant find rplacements. Are yours still all there? If so take them to a shop that does metal lines and they should be able to bend you some new ones. Plus you could get stainless steel ones made and not have to worry about rust. Just a thought.

11-22-2006, 07:08 PM	#5
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Help please!! looking for fuel lines for 89' Silverado w/350 Whats so different about them? They arent hi pressure or anything. Couldnt a guy just make them?

11-22-2006, 11:37 PM	#6
John S Registered User Join Date: Apr 2005 Location: Rochester NY Posts: 38	Re: Help please!! looking for fuel lines for 89' Silverado w/350 there is a company called finishline that is making new fuel lines for these trucks , have used them and fit pretty well.

11-23-2006, 06:59 PM	#7
neev_nav Flying Dutchman Join Date: Mar 2006 Location: Stouffville Posts: 220	Re: Help please!! looking for fuel lines for 89' Silverado w/350 I recently replaced all of my fuel lines while I had the box off of the truck to replace the tank and I went with rubber lines with fittings on the ends where they attach to the TBI, fuel filter and tank. So far so good, and best of all, no bending! __________________ 94 Chevy Ext. Cab 4x4 350 (My baby) "Women carpool. Men convoy."

11-23-2006, 08:48 PM	#8
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,285	Re: Help please!! looking for fuel lines for 89' Silverado w/350 I have some on a truck. I'll check Saturday if you still need them.

12-15-2006, 11:46 AM	#9
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: Help please!! looking for fuel lines for 89' Silverado w/350 Are the ones you need the steel hard line type or the braided stainless flexible ones? I might have a set laying around from one of my projects... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

12-28-2006, 09:01 AM	#11
deoncollins69 Registered User Join Date: Nov 2006 Location: Rantoul ILL Posts: 15	Re: Help please!! looking for fuel lines for 89' Silverado w/350 Hey guys you can get a full stainles kit from http://www.inlinetube.com/ for your year truck. they are 150 front to back great deal considering my 94 lines from the filter back by itself is 100$ for just one. Check em out. You can also get a stainless steel sending unit while your are at it for around 72$



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.